Question about Kodak EasyShare DX7630 Digital Camera

1 Answer

Kodak high camera temp

Ok i have had everything in the book to happen to this camera and this is i guess the last thing that can happen to it. i went to take a few pics of my new kitten and i be it comes up high camera temp im like wth and im thinking what has went wrong i just used it like a few hours ago and i did notice that the pics was being a little blurred is there something really bad wrong or somethins simple i can fix, or just buy a new one? please help for im a pic freak

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

I fixed it, cool!!!!!!!!
i took the battery out then done a few taps on the top, bottom and side and i be it worked after that i hope that this will help out with others that has the same issue

Posted on Feb 04, 2009

  • finesilver Jan 01, 2011

    this worked for me: just hit the bottom hard with your palm and the top and sides, not the front or back. After 3 hits, the date screen came back on and it was fixed. This was after the other two solutions I found on this site failed, namely pushing the shutter down before the message comes on or blowing into the camera slot with the memory card removed.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Camera is saving on memory card?


Take everything back to Wal-Mart and try again.

Sep 23, 2012 | Kodak EasyShare CD40 Digital Camera

1 Answer

My kodak easy share internal memory is full I went to wal-mart and clear the memory. I guess that I have about twenty-five picture on the camera then the camera said that the internal memory is full again.


dont you worry about that, the only thing you need to do is to format internal memory., you can do this by pressing menu button then scroll down and look for setup then press Ok button.,

now under setup press down arrow again then look for the word format then press Ok button, and you need to select the internal memory to format., gudluck!

Oct 13, 2009 | Kodak EasyShare C613 Digital Camera

2 Answers

When I turn the camera on the following message appears- high camera temperature, camera will shut off. The camera is a Kodak easyShare Z710


Have Kodak Easyshare V1253 with same, "high temp.," error then shutdown. Kodak batt. showed 25% charged. Charged batt 100% & temp. error went away. Batt. internal shows camera if batt. too hot. Try new batt.

Sep 12, 2008 | Cameras

2 Answers

KODAK EASYSHARE Z760


reset to factory settingsand chl if dat wrks....else most prob there is a prob in the temp sensor which can be handled only by the company people

Dec 31, 2007 | Kodak EasyShare Z760 Digital Camera

1 Answer

No picture


i have the same camera Kodak LS443. Min. cost to repair starts at $175.00 there is a chip that is faulty. Problem is you cannot just replace the chip other parts are involved. Kodak is aware of this problem but they will not recall this camera, if you send it to them for repair it will cost you much much more. On Ebay last week there were alot of these LS443 cameras guess what !! all were been sold for parts they almost all had the same problem no pic in the viewer just black, I really loved this camera but will never buy a kodak again, there very hard to repair. sometimes not even repairable.

Dec 04, 2007 | Kodak EasyShare LS443 Digital Camera

1 Answer

Kodak easyshare DX7630


X Ray machine would not harm the device. What Hi temp means I do not know- discuss it with the Kodak Support site.

Jun 21, 2007 | Kodak EasyShare DX7630 Digital Camera

4 Answers

Lens Error 25


Guess what I tried banging the bottom of my CW330 camera, as suggested by Timewarped, and the lens retracted and the "Lens Error 25" cleared. I can't believe it, you saved me about $80 in repairs. Thanks

Mar 25, 2007 | Kodak EasyShare C330 Digital Camera

5 Answers

"High camera temperature"


If there is a memory card inside the cad slot, take it out first. Open the camera. When the "high temperature camera" error appears, after it goes off, "BLOW AIR INTO THE CARD SLOT BESIDE THE CAMERA SEVERAL TIMES. I have blown air manually by my mouth. Then you can put back the memory card back or you can just simply Turn-ON sa camera. See if it work. It works fine for my CX7530 (i got this idea thru trial & error). Stupid kodak service center won't help, they just want to service my camera for almost half the price that i bought mine, & even suggested that i  should buy a new one.
I hope this works for you. ----kodak camera user from the Philippines.

Aug 29, 2005 | Kodak EasyShare C360 Digital Camera

Not finding what you are looking for?
Kodak EasyShare DX7630 Digital Camera Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Cameras Experts

kakima

Level 3 Expert

98879 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Tony

Level 3 Expert

2598 Answers

Are you a Kodak Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...