I want to upgrade the firmware on my N70,what do i do.i am also trying
to download yahoo!go 3.0 but am getting a message saying its not
available on my device. i checked the compatible phones and N70 is on
the list. any help?
An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert who has written 3 tips or uploaded 2 video tips.
An expert whose answer got voted for 20 times.
Re: failure to install yahoo!Go 3.0
Just update the latest version of nokia pc suit(available from nokia web site).In that there is a software updater section slect that and then you will get the prompt window for upgrading the firmware.The only thing u should be cautiond is the electricity n internet connection should not be interepted by anything.
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Technician (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Were you upgrading the firmware when this happened? Try it again. If it fails again try a NVRAM reset. Download the firmware and try installing it again. If it still fails, you need to replace the formatter.
You may just press and hold the reset button for 30 seconds with the Power cable connected, then leave the unit unplugged and wait for 1 minute and re-connect the power cable...
Download 67.3 MB, re-install using the Utility...
You can also try upgrading the firmware for PLK300..You can find the Upgrade tool with firmware on www.linksys.com/downloads.
1. Go to: http://www.linksysbycisco.com/US/en/support/PLK300/download
2. Download Upgrade Instructions
3. Download Quick Installation.
4. Download latest firmware upgrade
5. Do the Upgrade first. This will completely wipe out your security settings.
-This is a good thing as you probably know.
-Do the upgrade on all units (PLE300 and all PLS300s that you have.
-For the 4 port PLS300 just plug right in to your router)
6. After firmware upgrade, follow the instructions in Qucik Installation TO A TEE.
Do exactly what in says in the exact order it says.
This problem could be caused by either battery, charger or firmware failure. you can try the following to secure which!
-Try your mobilephone with another charger or connect it to a PC using a USB cable
> if ok? the problem is your charger!
-Try your mobilephone with another battery
> if ok? the problem is your the battery!
-Try your battery and charger on another phone
> if ok? the problem is your mobilephone/firmware :(
If you dont have access to other phone, battery, charger or USB-cable you can at least try the steps below:
1. Turn off your mobilephone
2. Take out your battery, Sim-card and memmory-card
3. Connect your charger
4. Put the battery in
5. Turn on the phone
If it doesn't help, with a little luck! you should get a USB-cable, back yor phone up and reset it to factory default and upgrade your firmware/software on the phone to the latest version!
OBS! You should only do it with a fully charged battery! or you could damage your phone irreversibly!!!
Firmware Upgrade Instructions: Please download and unzip the firmware file to computer's local hard drive and then follow the instructions in the "readme.txt" file to upgrade the firmware.
Warning : - Firmware upgrade failure may permanently damage the unit and causing it not to function. If the issues in the "Release Note" do not address the problem you are experiencing, please do not upgrade the firmware. Never upgrade the firmware using a wireless connection. Firmware upgrade will reset the Router to factory default state (all current settings will be replaced by default settings). When necessary, please write down the Router's current settings before performing the firmware upgrade. Please do not load the previously saved Router "configuration file" to the new firmware.
If you need assistance performing the firmware upgrade or if you have any questions, please contact our Techsupport Team http://www.trendnet.com/support.
Which version of firmware did u try? Is it 3.0510.0?
If you haven't tried then try installing this.From what I have heard this doesn't have anything extraordinary but its good enough to keep your phone to running smoothly!