Question about Panasonic Standard (CRT) Televisions

1 Answer

Bad picture it is a tx-68x024 panasonic, the picture is grey and fuzzy - you cannot see the real picture, just snow. the sound is fine (with that fuzzy sound in the background). dvd and ps3 is fine except the picture is washed out and faded. the tv and dvd player are about 6-7 years old. how do we get the picture back to normal? thanks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 30 Answers

I am aware of some TV stations already being switched to their digital stations, even though the government has extended the requirement date to May '09. I noticed on my VCR, when the DST changes; mine doesn't change to the current days as it was made before we changed to 6 extra wks of DST. Does yours do the same thing, or do you set the time manually. If you are not on Dish or Cable and your local TV channels have gone to digital already, that would be the only reason that you are getting the faded/snowy pictures on both. There are 3 ways that you can solve this. My Favorite is #3 for people who don't have cable/Dish. Also, they give you a $40.00 coupon which is the highest amount I personally have seen. 1). sign up for basic cable (if you do, you will more than likely have to look in a higher Ch. # to find your local stations, only a few are being left @ their original Ch. #). 2).Get a Dish. Or 3).You can go to: www.DTV2009.gov and apply on-line for a TV converter box coupon. If you have a copier and fax, you can apply that way as well (must be submitted by 3/31/09.) You can also apply by phone @ this ph. #: 1-888-388-2009 for those who can hear. Deaf (TTY-English): 1-877-530-2634 OR
Deaf (TTY- Spanish) 1-866-495-1161. Good Luck!
Remember your local Ch.'s probably won't be where they are now, unless you are in a small town. If this
helps you, I would really appreciate you telling me what you think of my answer. Thanks so much! Once again, good luck! Good Bye & Good Day. P.S. If I can be of further assistance, give me a shout back, and I'll try to be of more assistance.

Posted on Feb 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

TV has been getting static fuzzy lines, like snow in the picture increasingly bad. Now makes a pop noise, goes black for 2 seconds and comes back on. Thank you


Time ofr a new tv. The guns or gun control system is goign bad. Before it results in something worse ust replace the unit. Cost of repair is not worth the price.

Mar 02, 2011 | Sony FD Trinitron WEGA KV-36FS120 36" TV

1 Answer

Fuzzy picture, color and volume comes and goes


the main chip in the TV that controls all these options (sound - sharpness etc...) you will need to bring this TV into a repair shop - the transformer that blew up caused a voltage surge that fried this chip

Dec 08, 2009 | Panasonic CT-27D32 27" TV

1 Answer

I have a Sharp 32" Standard TV ... picture will get fuzzy either due to someone walking by or sometimes if sound coming from tv is vibrating. If we shut tv off and turn it back on it is clear again. The...


Hello: Your problem seems to be in or around the tuner of the television, More then likely you have cold solder joints on the turner that needs to be resoldered. Also check the coax end protruding from the back of the set where u connect the cable and make sure it is not loose, a bad ground on this connector to the turner shield will cause this symptom. My professional diagnostic is that when the television is cold the solder connections are making contact with the board, and as heat builds up in the television while watching these connections tend to seperate and make limited contact, causing fuzzy picture and in most cases no picture just snow...

Sep 06, 2009 | Sharp 32C-240 32" TV

1 Answer

I will to know the code for the precision Tv


Hi, I have a sharp 32sf56b. sound OK. Picture went dim and fuzzy. Clears up a little when turning brightness control all the way down. Picture has no snow. Can see fate vertical line on screen

Mar 08, 2009 | Standard (CRT) Televisions

2 Answers

Panasonic TX-34P300X Audio problem


I have facing some problem model Tx-34P300X panasonic Tv UK Model for sound not coming .But Amplifire is Ok. Pre not working.

Jan 17, 2008 | Standard (CRT) Televisions

1 Answer

Snowy screen just pops up


Bad tuner in tv....might be possible to solder bad connect in
tuner...........T.

Dec 14, 2007 | Hitachi 43FDX01B TV

1 Answer

Sound stuck at maximum - cannot turn down


unplug tv from the power source for about 2 minutes plug in. If this does not solve your problem U may have to futher check starting at the eprom for 5 Volts. also check for bad solders around the area

Dec 20, 2006 | Panasonic TX-29S90X TV

1 Answer

Panasonic


I do not have the details of this set but if you go to Google and type in the model number you can download the PDF file from sites, also there is a radio ameteur which specialises in Panasonic. From the faults reported it sounds like a bad soldered joint on a component which may be close to the AV inputs.

Oct 13, 2006 | Panasonic TX-32PK1 TV

1 Answer

Scart connection problem


have you checkede the connector to be sure theres no bent pins or nothig like fuzz in the ways??

Apr 01, 2006 | Panasonic TX-32PK1 TV

Not finding what you are looking for?
Standard (CRT) Televisions Logo

Related Topics:

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68323 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Radames Pagan
Radames Pagan

Level 3 Expert

196 Answers

Are you a Panasonic Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...