Question about Maytag Neptune MDE5500AY Electric Dryer

1 Answer

Power on but it won't spin.

Power on , but it won't spin. hear a clicking noise in the motherboard. everything seems to work. except it won't spin. the dryer was only spinning but not heatin lately. need assistance

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 750 Answers

Hello zurdo4ever
Welcome to Fixya
My name is Huum,


You said, power on , but it won't spin. hear a clicking noise in the motherboard.
Everything seems to work. except it won't spin.
The dryer was only spinning but not heating lately. need assistance

The clicking is a bad relay sound.
This is an electrical problem and it may be a need for a new cpb (Control panel Board) also.
time to get a tech in there to diagnose which problem you have and get you doing laundry again


Thank You For trusting us with your question
Please remember to leave a solved rating before you leave!

Posted on Feb 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whirlpool dryer won't spin


Most dyers after you pull the top up, the front should just lift a little and it should come loose, sounds like you may have the belt intact, but the motor is not conected to the belt.

Jan 12, 2013 | Whirlpool Dryers

2 Answers

Samsung dryer, model: DV317AEG turns on, but won't spin


Could be the motor is full of lint. Depending on how mechanically inclined you are take the belt off and spin the barrel and the motor separately motor should spin free, barrel a little harder to spin,but spin at least a quarter turn after letting go.

Jul 05, 2012 | Dryers

1 Answer

My dryer does not spin. The dryer lights come on and everything works. When you press start the dryer does not spin and I hear a clicking noise in the back.


Your belt is most likely broken. YouTube "How to replace dryer belt" then add your make/model. They are all basically the same and pretty easy to change. The belt may run 20-25 dollars and will take about 15 minutes to replace.

Nov 01, 2011 | Samsung 7.3 Cu. Ft. Electric Dryer

1 Answer

The dryer works, heats, tumbles, everything is fine. Except that there is a thump as the drum turns that seems to be coming from the top.


Hi,


Here is a tip that I wrote about dryers and noises...

It will help you determine what is happening there...

Dryer Repair Squeaks, Grinding, Clicking and Knocking Noise


heatman101

Asker's Testimonial "That answer was very informative - thank you for taking the time to educate me. " - teresa241964

Jun 17, 2010 | Kenmore 93042 Gas Dryer

1 Answer

It just stopped heating


If you have a gas dryer the burner is ignited by a eletroniic ignitor. It will make a ckicking noise upon starting it when set in the heat mode. You should hear the click or clicking noise it makes within 30 seconds after starting the dryer. If no click is heard, replace the spark ignitor

Mar 30, 2010 | Dryers

1 Answer

Dryer will not spin


are you sure the drum belt isn't broken,the whirring noise your hearing sounds to me like the motor is turning

Jul 30, 2009 | Whirlpool GEW9250 Electric Dryer

1 Answer

Power on but it won't spin.


You have a broken drive belt. To access the belt you have to remove the back metal cover.
The no heat problem could be a heating element or safety thermostat. These are also located under the back metal cover.

Jun 02, 2009 | Maytag Neptune MDE5500AY Electric Dryer

1 Answer

Whirlpool dryer has power, but drum won't spin


More likely does have a belt. Get me the model number and I will see if I can help you on this problem, Thanks, Sea Breeze

Mar 21, 2009 | Whirlpool GEW9250 Electric Dryer

1 Answer

Dryer will not start


There is a start relay on the computer control board. You probably hear a very dull click. That click is the relay on the computer board trying to engage, but it won't and therefore your dryer won't spin and your board sends a beep and perhaps an "E11" error code to the LED display (Not sure on Kenmores.).

In plain english, you have a bad control board now and will have to replace it. Cost about $130.

Dec 15, 2008 | Kenmore Elite HE4 Electric Dryer

1 Answer

Washplate problem Kenmore Elite Calypso washer


Hello genny2626
Welcome,

You said,your 6 year old Kenmore elite top loader's wash plate doesn't seem to go through its proper motions. When the lid is closed and the washer has filled and the agitating cycle begins, you can hear a vibrating noise as if the plate is trying to move on the gentle cycle, but when the lid is opened, nothing has moved at all. The drain and spin work fine, and the machine goes through an entire cycle without error messages, but the clothes aren't clean. You said, you have heard a lot of horror stories of how expensive these washers are to repair, so would like an idea of what's wrong beforehand.

Here are a list of common vibration noises


Noisy, vibrating, off-balance

 Is the washer level? Does the washer rock when pushed
against the corners?
The washer must be level. The front and rear feet must be in
firm contact with the floor. Check that the locknuts are
tightened. See “Level the Washer.”
 Is the floor flexing, sagging or not level?
Flooring that flexes or is uneven can contribute to noise and
vibration of the washer. A ³⁄₄" (1.9 cm) piece of plywood under
the washer will reduce the sounds. See “Location
Requirements.”
 Is the load balanced?
Evenly distribute the load in the washer basket and make
sure the height of the load does not exceed the top row of
basket holes. See “Starting Your Washer.”
 Do you hear clicking or other noises when the cycle
changes from washing to draining or spinning?
When the drive system shifts or the washer basket settles
between cycles you may hear noises that are different from
your previous washer. These are normal washer noises.
 Is the washer gurgling or humming?

Is the washer level? The wash load
should be balanced and not overloaded. The washer must be
level. The front feet should be properly installed and the nuts
tightened. Reset the rear leveling legs (if needed). See the
Installation Instructions.
Did you completely remove the yellow shipping strap with
cotter pins? See the Installation Instructions.
• Are the gears engaging after the drain and before spin, or
is the upper part of agitator clicking during wash? These
are normal washer noises.

Let me know if any of these are the solution!
Huuum



Oct 13, 2008 | Kenmore Elite HE4 Electric Dryer

Not finding what you are looking for?
Maytag Neptune MDE5500AY Electric Dryer Logo

Related Topics:

291 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Dryers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Tim Whalen

Level 3 Expert

3069 Answers

Are you a Maytag Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...