Question about Wacom Cintiq 12WX Interactive Pen Display Monitor

1 Answer

Hi, having problems with my cintiq 12wx. It is only working as a tablet right now. Using my pen on the cintiq, and it just moves the cursor on my other monitor. I can't transfer anything from my monitor to the cintiq.

Posted by on

  • 2 more comments 
  • kumajin Mar 03, 2009

    Same here. All I keep getting is "No Sync", then the screen goes to standby.

  • Anonymous Mar 06, 2009

    I just got one, having the same problem

  • tbh805 Mar 16, 2009

    yeah. im not getting anything to come up. HELP!!! it looks so cool!!!

  • Anonymous Mar 17, 2014

    wacom cintiq cursor

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Hey guys,
I have posted the solution to this problem (or my version of a solution) elsewhere on this site - but here it is again, just for you!

I had a similar problem with my cintiq 12WX!
The way i did it was by going into CONTROL PANEL (please note i am using XP windows), then into DISPLAY, then into the last tab on the right aka SETTINGS. Once in SETTINGS go into the ADVANCED section, then click on the DISPLAY tab. In here you should have 3 things - monitor, panel and tv. The tv bit is irrelevant. Look at the MONITOR and PANEL tabs, if your wacom IS set up correctly when you click on the button (it is a circle with a line inside it) on the title (it will either be greeny/turquoise or red). If it is red, click it and the same button on the panel title will turn green aswell. Below the pictures of a computer and a laptop there should be 2 buttons that are the same for each. Currently, my almost working cintiq is set to having the button with two squares on it under the heading of 'MONITOR' and the button with a circle is on under the section entitled PANEL.
If this doesn't work I dont know what to suggest.
Hope this helps.
M

Posted on Mar 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have just installed Toon Boom Harmony and suddenly when calibrating my pen it tends to now draw around 2mm below where the cross hairs are shown. Yet when used with Animate Pro2, there is never a...


Hi , unfortunately that's an issue with toon boom Harmony , not a cintiq 's . there is no solution for it unless they provide an update for harmony or something. if you notice even the distance from the cross hair cursor and the brush stork still off set .

Nov 26, 2012 | Wacom Cintiq 12WX Interactive Pen Display...

1 Answer

Wacom cintiq 12wx calibration


I had a similar issue using the 12wx with a 15" MacbookPro Retina. Screen displayed the desktop way too much to the left. I found that the refresh rate of 59.8 hertz seemed to not be compatible despite it automatically being set. After changing this to 74.9 Hertz, the desktop is now properly centered on the Wacom screen and can be calibrated now. Not sure if this applies to Windows machines but perhaps something to keep in mind.

Jun 09, 2012 | Wacom Cintiq 12WX Interactive Pen Display...

1 Answer

I've had this same issue! My Wacom Cintiq 12WX tablet has been having this "Signal out of Range" issue all of the sudden with my Mac OSX Laptop. I've bought and tried new DVI cables and...


Hi 13ambreuer

"Signal out of Range"
is a problem between the graphics card, monitor, motherboard or graphics card port.
if you have to do troubleshooting on the monitor and display card, proved no problem to it. This means that the problem now is the motherboard and graphics card port.
(But should remember, problems ram, power supply and processor also causes the same error) * Sometimes *)
mean here you have to do the troubleshooting on all hardware on your computer

thnks&regards

Dec 08, 2010 | Wacom Cintiq 12WX Interactive Pen Display...

2 Answers

Silver Cirlces when pen touches tablet


The solution is simple to your silver circle happening every time you click the screen. Go to Start>Control Panel and double click Pen and Input Devices. Click on the second tab in the Pen and Input Devices (Pointer Options) and uncheck all four of those top boxes. Voila! No more silver circles when you click!

If your tablet is acting buggy, try installing the latest driver from the Wacom.com website.

Dec 23, 2009 | Wacom Cintiq 12WX Interactive Pen Display...

2 Answers

Cintiq 12wx


I had a similar problem with my cintiq 12WX - i have managed to sort this problem.
The way i did it was by going into CONTROL PANEL (please note i am using XP windows), then into DISPLAY, then into the last tab on the right aka SETTINGS. Once in SETTINGS go into the ADVANCED section, then click on the DISPLAY tab. In here you should have 3 things - monitor, panel and tv. The tv bit is irrelevant. Look at the MONITOR and PANEL tabs, if your wacom IS set up correctly when you click on the button (it is a circle with a line inside it) on the title (it will either be greeny/turquoise or red). If it is red, click it and the same button on the panel title will turn green aswell. Below the pictures of a computer and a laptop there should be 2 buttons that are the same for each. Currently, my almost working cintiq is set to having the button with two squares on it under the heading of 'MONITOR' and the button with a circle is on under the section entitled PANEL.
If this doesn't work I dont know what to suggest.
Hope this helps.
M
(p.s. you may have to improvise with the settings in the display bit to get it to work).

Mar 18, 2009 | Wacom Cintiq 12WX Interactive Pen Display...

2 Answers

Problem with Cintiq 12wx


Hi...there Jenn!
Go to your toolbar bottom r/h side, look for VGA Display Icon. Open it and look for dual monitor setup. It's might be what you has been looking for... If not, read your cintiq user guide... Have a nice day!

Feb 03, 2009 | Wacom Cintiq 12WX Interactive Pen Display...

2 Answers

Wacom Cintiq 12WX


I had the same problem with the "signal out of range" box in the middle of the screen. I went to Display on Control Panel and clicked the Settings tab. Click the monitor icon for the Wacom tablet in the window (if you are using more than one monitor) and set the screen resolutioin to 1280 by 800 pixels. The "signal out of range" box disappeared.

Oct 26, 2008 | Wacom Cintiq 12WX Interactive Pen Display...

Not finding what you are looking for?
Wacom Cintiq 12WX Interactive Pen Display Monitor Logo

1,256 people viewed this question

Ask a Question

Usually answered in minutes!

Top Wacom Computer Monitors Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Wacom Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...