Question about JVC RM-C18G-1H Remote Control

Open Question

Need code for jvc th-c50 lost remote need to program universal

Lost the remote need code

Posted by on

6 Suggested Answers

CompuGuy44
  • 432 Answers

SOURCE: lost my manuel "codes" to my rca universal remote control crk74ba3

This website should help.
http://www.thompsontv.com/rcarc.html

Posted on Nov 07, 2007

mewms_14904
  • 1027 Answers

SOURCE: remote code list

JVC DVD 0558 0623
Motorola Cable 0476 1106 0276 0810

Posted on Mar 06, 2008

SOURCE: RCA RCR 451 universal remote codes

jvc codes: 012,013,054,055,060,063,065,066,123,157,159,242

Posted on Sep 19, 2008

  • 17 Answers

SOURCE: lost program guide for rcr3273 rca universal remote need codestoo

Go to thompsontv.com/carc.html

Posted on Oct 30, 2008

  • 1 Answer

SOURCE: Need remote control codes for the JVC Multi Brand Remote Control Unit, LP20303-018

It took me a week to find the right instructions and codes on how to do this so I am posting it everywhere I can to help out folks with the same remote. Pay close attention to the instructions, for instance when programming the remote for TV use make sure you hold the TV button down while you enter the code and then press OK, You also have to hold the TV button down while you use the volume and channel controls or it will just change the VCR channel.
===========================================


A
Turn on TV

Turn on the TV using the Power button on the TV or its Remote.

B
Set TV brand code

A
Press and hold TV.
B
Press MBR SET.
C
Press the Number keys to enter your TV.s brand code.
D
Press OK, and release TV. The TV should turn off.


C
Operate TV

While holding down TV, press one of the following buttons:
POWER 1, TV/VCR, TV CH+/., ^(TV Muting), TV VOL+/.,
and the Number keys.

.
For some brands, you must press ENTER after having pressed the
Number keys to enter a channel number.
TV BRAND CODE TV BRAND CODE
JVC 01, 03
SONY 07
HITACHI 10
SAMSUNG 12
MAGNAVOX 02
SANYO 13
MITSUBISHI 03
SEARS 13
PANASONIC 04, 11
TOSHIBA 08
RCA 05
ZENITH 09
SHARP 06

Cable Box or DBS Receiver Brand Setting

A
Turn on cable box or DBS receiver

Turn on the cable box or DBS receiver using the Power button on
the unit or its Remote.

B
Enter brand code

A
Press and hold CABLE/DBS.
B
Press MBR SET.
C
Press the Number keys to enter your cable box.s (or DBS


receiver.s) brand code.
D
Press OK, and release CABLE/DBS.

C
Operate cable box or DBS receiver

While holding down CABLE/DBS, press one of the following
buttons: POWER 1, TV CH+/., and the Number keys.

.
For some brands, you must press ENTER after having pressed the
Number keys to enter a channel number.
.
To change the cable box.s (or DBS receiver.s) channels, press TV
CH+/–
or the Number keys. (The CH+/–
button can be used to
change the VCR.s channels only.)

CABLE BOX BRAND CODE
ARCHER 01, 05, 17
CABLETENNA 01, 17
CABLEVIEW 15, 16, 17, 21, 25
CITIZEN 15, 16, 17, 21, 25
CURTIS 02
DIAMOND 01, 17
GC BRAND 15, 16, 17, 21, 25
GEMINI 15
GENERAL INSTRUMENTS 01, 04, 06, 11, 12, 15, 28
HAMLIN 10, 18, 23
JASCO 15
JERROLD 01, 04, 06, 11, 12, 15, 28
NOVAVISION 02
OAK 07
PANASONIC 13, 14
PULSER 15, 16, 17, 21, 25
RCA 13, 14
REGAL 10, 18, 23
REMBRANDT 01, 16, 17
SAMSUNG 05, 16, 24
SCIENTIFIC ATLANTA 02
SIGMA 07
SL MARX 05, 16, 17, 24, 25
SPRUCER 13, 14
STARGATE 05, 15, 16, 17, 21, 24, 25
TELEVIEW 05, 16, 24
TOCOM 01, 04, 16
UNIKA 01, 17
UNIVERSAL 16, 17, 25
VIDEOWAY 03, 09, 22
ZENITH 03, 09, 22
DBS RECEIVER BRAND CODE
JVC (DISH Network) 51
ECHOSTAR (DISH Network) 51
SONY (DSS) 41
RCA (DSS) 40

Changing Remote Control Code

This Remote is capable of transmitting two control codes; one set
to respond to A code control signals and another set to respond to
B code control signals. This Remote control is preset to send A
code signals because your VCR is initially set to respond to A code
signals. You can easily modify your VCR and the Remote to
respond to B code signals. When using two JVC VCRs, set two
VCRs and their Remotes to different codes, so that you can
operate these VCRs separately.

A
Set remote control code for Remote

A
Press and hold A/B.
B
Press the Number key .2..
C
Press OK, and release A/B.


.
The Remote now can transmit B code control signals.
B
Check remote control code for VCR

Press and hold 4
on the VCR for more than 5 seconds while the
VCR is turned off. The code currently set appears on the display
panel.

C
Change code for VCR

Press any key on the Remote. The VCR now responds to B code
control signals.

.
To set the Remote and the VCR back to A code control signals,
repeat the same procedure as shown above except pressing the
Number key .1”
in step B
of 1
1111.
To control two VCRs with the same Remote

You can control two JVC VCRs by switching the remote control
code for the Remote between A and B (.
step A
AAAA), keeping two
VCRs to different control codes.

.
To change only the remote control code for the Remote, DO
NOT perform steps B
BBBBand C
CCCC.


Posted on Mar 01, 2009

  • 109 Answers

SOURCE: i have lost the ge universal remote guide for the

These are the steps on how to program your GE Universal Remote Control without the list of codes.

1. Manually turn on the device to be
controlled.

2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.

3. Press and quickly release the desired device button. The red indicator blinks off once.

4. Press the ON•OFF button repeatedly (up to 300 times) until the device to be controlled turns off. The red indicator blinks off with each button press.

Note: Code Search starts from the currently stored four digit number under that mode. Sometimes the
first code that “works” with your device may only
allow limited functionality (e.g. the MENU button
might not work). There may be a code that performs
more functions. Continue the code search process
until the best code is found.

5. Press and release ENTER to install the code.

Posted on Jun 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need jvc remote codes


038,027,018,033,000 are the codes to check. If you wish to get more details, check this site. Pull up older posts there. Setup code list and setup proceedings to many popular brand remote controls are given. Three digit, four digit, five digits and two-digit code list are there. Check the site with patience. Surely you'll get a solution to your problem. Search the site by 'Timeslide' option. It will make search easy. Or, type in the brand name to your device into its search box, and press "Enter."

Mar 26, 2013 | Remote Controls

2 Answers

Philips PM435S Universal Remote


I need the proggraming codes for a JVC TV and a NEXXTECH Dr30G0DVD player

Jan 21, 2009 | Remote Controls

2 Answers

Need codes for programming a philips TV


http://www.urc.philips.com/
you have to input if you're european or american, into the box on the left.

i found these codes:
PHILIPS ............ 807 022 020 422 122
.................... 222 322 002 430 901 402
.................... 408 109 210 310 715 520

Here's a link to download the urc user manual too.

http://safemanuals.com/user-guide-instructions-owner-manual/ONE%20FOR%20ALL/URC%203021-_E

good luck

chris

Dec 17, 2008 | One For All URC-3021 Remote Control

4 Answers

RCA RCR 451 universal remote codes


www.rca.com/customerservice... click the find codes link.. then select your clicker's model number from the drop down box.

The problem is that it does not list the steps to program the remote after you have the correct code. Does anybody have this information?

Sep 03, 2008 | RCA Universal Remote Control

6 Answers

NEED HELP PROGRAMING UNIVERSAL REMOTE CONTROL


rca d770 universal remote how do i program

Sep 03, 2008 | RCA Universal Remote Control

2 Answers

My remote dont work


I have a Phillips Magnavox 5 device Universal Remote, model MRU3500 that may help.

JVC brand - including LCD, Plasma & Panal televisions Codes: 0607, 0204, 0321, 0508, 0617, 0326, 0993, 0802, 0108, 0308, 0715

Sep 03, 2008 | Philips 5-Device Universal Learning Remote...

3 Answers

Need help


AM UN TELEVIZOR PHILIPS SI VREAU SA MEARGA TELECOMANADA UNIVERSALA LA EL ,AS VREA SA STIU UN COD PT
TELECOMANA

May 24, 2008 | Philips Magnavox Learning Universal Remote

4 Answers

RCA universal remote code


i lost my book with my codes . can you tell me the correct code to my rca to my zenith television

Apr 10, 2008 | RCA RC-U703SP Remote Control

1 Answer

Need codes for universal remote


JVC TV CODES:
060 026 197 069 247 923 012 065 067 141

NEED STEPS RE PROGRAM MY TV. I LOST INSTRUCTIONS. I DO HAVE CODES.

THANKS

Jan 04, 2008 | GE JASRM24912 Remote Control

Not finding what you are looking for?
JVC RM-C18G-1H Remote Control Logo

Related Topics:

472 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Remote Controls Experts

The Knight
The Knight

Level 3 Expert

68323 Answers

Pablo Gonzalez

Level 3 Expert

733 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a JVC Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...