When I try and graph a regular linear function an Error pops up that says

ERR:Window Range

1 Quit

Reset the windows dimension to defauts. Press ZOOM then 6:ZStandard.

Sep 16, 2011 | Texas Instruments TI-83 Plus Calculator

There is no such error message from the TI 83PLUS. Did you mean WINDOW RANGE?

The easiest way to correct the messed up window dimensions is to reset them. You can press the Zoom button and select 6:ZStandard

The easiest way to correct the messed up window dimensions is to reset them. You can press the Zoom button and select 6:ZStandard

Apr 26, 2011 | Texas Instruments TI-83 Plus Calculator

Here is the link to post where I show several ways to draw a circle. If you do not have the conics applications download and instakk it on the calculator.

You can also use the cabri Jr application downloadable from education.ti.com. This application is dedicated to geometry.

You can also use the cabri Jr application downloadable from education.ti.com. This application is dedicated to geometry.

Apr 10, 2010 | Texas Instruments TI-83 Plus Calculator

I tried all possible situations where one would get an error ERR: ARCHIVED 1:QUIT 2:GOTO in relation to graphing, and I was unable to do so. Thus I cannot explain your error (in relation to graphing). I conclude that the error is unrelated to the graph.

As a general rule, one you get message ... 1:Quit, 2:GOTO press 2 and you will be shown the location where the offending symbol is.

Anyway, to graph functions, always deactivate the statistical plots

As a general rule, one you get message ... 1:Quit, 2:GOTO press 2 and you will be shown the location where the offending symbol is.

Anyway, to graph functions, always deactivate the statistical plots

- Press [2nd][Y=] to access (STATPLOT) then press [4:PlotsOff]
- Command PlostOff echoes on main screen.
- Press [ENTER], calculator answers Done.
- Open the [Y=] editor to enter your function and
- Press [GRAPH].
- If you do not see any graph,

- press [ZOOM][6:ZStandard] or
- adjust the window dimensions by
- pressing [Zoom] and
- setting the Xmin,Xmax,Ymin,Ymax values
- making sure that Xmin is less than Xmax, and Ymin is less than Ymax.

Feb 28, 2010 | Texas Instruments TI-83 Plus Calculator

There's something wrong with your window limits, for example Xmax < Xmin or Ymax < Ymin. Press WINDOW to bring up the window editor and examine the values, making sure there are no inconsistencies.

If you don't see anything wrong, post a comment here listing all of the entries in the window editor.

If you don't see anything wrong, post a comment here listing all of the entries in the window editor.

Feb 19, 2010 | Texas Instruments TI-83 Plus Calculator

Seems unlikely that you get a syntax error for both graphing and Zooming. Probably the error is in the function you are trying to graph.

To reset the RAM,

Press [2nd]MEM][7:Reset][1:All Ram][2:Reset] [ENTER]

Calculator answers with Ram Cleared.

Press [CLEAR] button to erase the above message.

Once Ram is cleared, open the [Y=] function editor and at the Y1= line, enter [X,T, theta, n] key or [ALPHA][X], to draw the simple function Y1=X.

If that works, that means your calculator is OK.

To reset the RAM,

Press [2nd]MEM][7:Reset][1:All Ram][2:Reset] [ENTER]

Calculator answers with Ram Cleared.

Press [CLEAR] button to erase the above message.

Once Ram is cleared, open the [Y=] function editor and at the Y1= line, enter [X,T, theta, n] key or [ALPHA][X], to draw the simple function Y1=X.

If that works, that means your calculator is OK.

Jan 19, 2010 | Texas Instruments TI-83 Plus Calculator

This usually happens after the statistical graphs have been used. You should deactivate them. Press [2nd][Y=] (STAT PLOT). Select [4:PlotsOff] [ENTER]. Calculator echoes Done on main screen.

Restart your graphs.

Restart your graphs.

Dec 28, 2009 | Texas Instruments TI-83 Plus Calculator

Press the 2nd Button then the ZOOM button. Make sure that AxesOn is highlighted. If not, move your cursor down until you on AxesOn and press ENTER.

If AxesOn is highlighted, then it is probably your window. Press ZOOM, then 6.

If AxesOn is highlighted, then it is probably your window. Press ZOOM, then 6.

Jun 03, 2009 | Texas Instruments TI-84 Plus Calculator

You're probably trying to graph a function that does not involve stat plot features. You can correct this by turning off the stat plot features. Press "2ND" "STAT PLOT" and then select 4:PlotsOff.

Apr 20, 2009 | Texas Instruments TI-83 Plus Calculator

You're probably getting a dimension error trying to graph a function that does not involve stat plot features. You can correct this by turning off the stat plot features. Press "2ND" "STAT PLOT" and then select 4:PlotsOff.

Dec 04, 2007 | Texas Instruments TI-83 Plus Calculator

439 people viewed this question

Usually answered in minutes!

×