Question about ASUS PU-DLS MB, Dual Xeon/ E7501/ FSB533/ SCSI/ 2 GB LAN (GXMBPUDLSMB) Motherboard

1 Answer

Drivers required Where can I get the Drivers for the on board SCSI and Ethernet?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,179 Answers

For an asus motherboard you can get the drivers from asus.com. All you will need to do is look up your board in the support area & input the operating system you are using. Once you do this there will be a list of all bios & driver files available for you to download. Hope this helps & please give this answer a fixya rating. Thanks.

Posted on Feb 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I find the Windows Server 2008 driver files for the Adaptec CERC SATA1.5/6ch?


OK, EZPZ.
These drivers will install when you first start installing windows 2008 server. You'll see a option that says: Hit F4 for any further drivers needed for windows to install. I think it's F4. You can place these drivers on a thumb drive OR a CD - you must extract the files on to a thumb drive. At the very start of the windows install you'll see the option for additional drivers.
24930663-deewisxuy4wetc5wzbekciyz-2-0.png
First screen - Success
24930663-deewisxuy4wetc5wzbekciyz-2-1.png
SCSI - Yes, that is correct. Correct, but This isn't a SCSI controller
24930663-deewisxuy4wetc5wzbekciyz-2-3.jpg
If you choose the SCSI driver from Dell, on the disk, you won't get...
24930663-deewisxuy4wetc5wzbekciyz-2-6.jpg
This screen. This screen means that windows could not find any driver for your drive and there for, you must start over - Same steps.
But make sure you choose the correct driver - you might have to try a few that are in the list.

Greatest of luck - EZPZ
Have a great night..

Aug 11, 2014 | Dell PowerEdge SC1420 Dual Xeon 3.2GHz 2GB...

1 Answer

NEED ETHERNET DRIVER FOR SAHARA NOTEBOOK WITH INTEL BOARD DEVICE ID:PCI/VEN-1969&DEV_1083&SUBSYS_0872152D&REV_CO\4&1ABF58B7&0&00E0


You can download the LAN and device drivers from the Sony WEB site.
Select your model notebook and the Windows drivers you require. Please click on this link to the Sony support WEB site :-
http://esupport.sony.com/US/perl/select-system.pl?PRODTYPE=1,24,72&DIRECTOR=DRIVER

Apr 12, 2013 | Computers & Internet

1 Answer

XP can't recognize SCSI Ultra320 hard Drive


First, determine if your "motherboard" will support a SCSI hard drive interface. The type of SCSI drives that are available are Wide Ultra SCSI (40MB/sec), Wide Ultra 2 SCSI (80MB/sec), Ultra 160 SCSI (160MB/sec) and Ultra 320 SCSI (320MB/sec). Today's standard for SCSI drives is the SCA SCSI which has an 80 pin female cable to drive information from the drive to the system board.

Set the jumpers. The drive should have jumpers on it that were set by the manufacturer. Setting the jumpers allows the drive to be recognized by your computer's hardware. If the jumpers have not been set, you will need to set the jumper of the primary drive to "Master," and if you are installing a secondary drive, the jumpers would be set to "Slave." The master drive is the drive that the computer boots to first when it starts up. The jumpers are pins located on the block or end of the hard drive.Resetting the BIOS default should make the system recognize the drive. Or Press F6 to install third-party SCSI drivers.

Sep 11, 2012 | Fujitsu (MAT3147NC-P) 147 GB SCSI Ultra320...

1 Answer

Configure & install two scsi disks scsi disks in ML 150 G2


The SCSI driver is required to installed during the initial boot up for installation when additional drivers are asked .the new models dont come with a Floppy drive so an external floppy drive can be used .The detection of HDD s must be at the startup by the Bios os SCSI card.

Feb 24, 2010 | HP ProLiant ML150 G2 Server

2 Answers

Drivers for Toshiba satellite A75-S226


here ya go

http://www.officialdrivers.net/toshiba-drivers.php?gclid=CJip5OKvpJsCFQ4MDQodWCAtCg

Jun 25, 2009 | Toshiba Satellite A75-S226 Notebook

1 Answer

915 ethernet drivers


Hii, you can download all the driver of your Intel motherboard including Ethernet driver also at
http://downloadcenter.intel.com/default.aspx?iid=gg_work+home_dowloads#

Go this site and at the left hand side, go to the desktop board and select your exact motherboard model. After selecting the model you just download the driver as per your requirement and install it.

Apr 22, 2009 | Intel Computers & Internet

1 Answer

MO drive 230MB required


you can get the infomation about cost here:-
http://www.ciao.co.uk/Sony_EDM_230CDF_1_x_230_MB__5615745

and for drivers visit sony web site under support section.

Feb 23, 2009 | IBM (MTA-3230) Tape Drive

1 Answer

Ethernet card on my Board cannot work- requires driver install


This board has an Integrated Intel® 82562ET LAN.

The best place to download drivers is the manufacturer's website. The Intel website page for the D845PEBT2 XP drivers is here:)

http://downloadcenter.intel.com/filter_results.aspx?strTypes=all&ProductID=899&OSFullName=Windows*+XP+Home+Edition&lang=eng&strOSs=45&submit=Go%21

The Intel website page for D845PEBT2 general information is here:)

http://support.intel.com/support/motherboards/desktop/D845PEBT2/

Jan 10, 2009 | Intel Desktop Board D845PEBT2 Motherboard

1 Answer

My Cd-Rom/DVD-rom don't work. It doesn't open any folder. I thought I have problems with drivers: SCSIVAX DVD/CD-ROM SCSI CdrOM DEVICE DVD-ROM SD-R2102 TOSHIBA LAPTOP SATELLITE 5005-S507 THANKS, OSCAR


According to the Toshiba website, the scsi cd-rom/dvd-rom does not require a driver to operate, but the driver for the scsi controller card it plugs into may need to be reinstalled or updated. Visit the following link, and go to the section labeled scsi cdrom/dvdrom. At the bottom of this section there are two links to websites where you may be able to find the drivers for your scsi controller card.

http://sdd.toshiba.com/main.aspx?Path=8100000000220000000100006598000000E7/810000000C58000000010000659C00002C36

Apr 09, 2008 | Computers & Internet

1 Answer

Toshiba DVD ROM SD M1302 driver


If you are using Windows 98, 98SE, ME, 2000, NT or XP, and have an ATAPI/IDE CD/DVD drive, there is no driver needed (see Toshiba statement I have posted below). Under no circumstances, if DVD is properly installed and functional, will you need ANY driver!

If your DVD drive is a SCSI drive, then it may need drivers specific to the SCSI card you have installed (see the specs/manual or website for your card). You may also need the Adaptec SCSI setup, available at this address:

http://www.adaptec.com/worldwide/support/suppbyproduct.jsp?sess=no&language=English+US&cat=%2FTechnology%2FSCSI+Software&fromPage=driverindex

or use this address if you have a LOGIC based SCSI card or device:

http://www.lsilogic.com/

Now, if you meet the criteria for the first paragraph I wrote, and your PC does not load the driver automatically (after a reboot or two) then you have a PHYSICAL or HARDWARE problem. Either the DVD drive is improperly cabled, improperly installed or defective.

Those are all your options. See below, from Toshiba website
good luck
-----------------------
http://sdd.toshiba.com/main.aspx?Path=ServicesSupport/DeviceDrivers

ATAPI CD-ROM and DVD Drivers

Toshiba's CD-ROM and DVD-ROM drives do not require any unique device drivers for Windows '95/'98/2000/XP/NT.
After installing your drive and re-booting, your system should recognize your CD-ROM or DVD-ROM. Win '95/'98/2000/XP/NT Operating Systems support all Toshiba ATAPI CD-ROM and DVD-ROM drives natively.

DOS/Windows 3.x Device Drivers

This device driver is to be used with DOS/Windows 3.x operating systems. Do not use this driver with Windows '95, Windows '98, XP or Windows 2000 unless you are going to use your system in the REAL or MS-DOS Modes. Device drivers for Windows '95, Windows '98, Windows 2000, XP, OS/2, and NT operating systems are provided with the installation or setup software of each operating system.

DOS ATAPI Interface Driver
If you prefer using DOS click the link below to download a MS-DOS ATAPI interface driver.
atapi.exe

SCSI CD-ROM and DVD Drivers

SCSI interface drivers are written for the SCSI card you are using in your system, by the SCSI card manufacturer. They are not specific to your Toshiba drive and are not provided by Toshiba. If during installation Windows can not find the correct SCSI software driver for your SCSI card and you do not have the software driver that came with your SCSI card, contact your SCSI host adapter manufacturer.

Adaptec SCSI Drivers
LSI Logic (Symbios) SCSI Drivers
DVD Viewing Software

Toshibas DVD drives require a third party software to be installed in your system to enable you to view DVD movies. If you purchased your drive as part of a kit, the software may have been included. The links below will provide some possible solutions should you not have this type of software.

Nero6 (Toshiba recommends)

Toshiba does not recommend nor endorse any of the following manufacturers software products. Software names are provided only as a courtesy to our customers. Please check with the software manufacturer to assure that their software supports your drive model.

DirectDVD
Cyberlink PowerDVD
WinDVD
Media Burning Software
Toshiba's recordable drives require third party software to be installed in your system to enable you to burn media. If you purchased your drive as part of a kit, the software may have been included. The link below will provide some possible solutions should you not have this type of software.

Nero6 (Toshiba recommends)

Toshiba does not recommend nor endorse any of the following manufactures software products. Software names are provided only as a courtesy to our customers. Please check with the software manufacturer to assure that their software supports your drive model.

NTI CD & DVD Maker
Gear DVD & CD-RW
Roxio Toast (Macintosh)
Easy CD Creator
Stomp Clinkn Burn Pro

Feb 24, 2008 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top ASUS Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18330 Answers

David
David

Level 3 Expert

752 Answers

Are you an ASUS Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...