Question about Powerware Series 9 Prestige 1000 EXT (PX01032SH) UPS System

2 Answers

I need a manual for a powerware prestige (1250p2se)

The batteries have been replaced, charged & its running but i keep getting a beeping

Posted by on

  • Anonymous Apr 02, 2009

    I NEED POWERWARE 9 PRESTIGE SERIES SERVICE AND REPAIR MANUAL

  • Tim Dawson Feb 28, 2014

    Eaton is too ignorant to provide docs, but I suggest you connect to LasSafe (free) and see what error code the unit is generation, and react accordingly.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

Eaton is too ignorant and greedy to sell service docs, but if you connect the unit to LanSafe (their software) or prehaps Nut, or even connect with a terminal session via serial, the unit will likely tell you what the alarm is about, and you can react accordingly.

Posted on Feb 28, 2014

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 21 Answers

Old school hollywood baseball old school hollywood baseball old school hollywood baseball

Posted on Feb 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a powerware 9120 (6kva) and about 1 week i replaced all 20 batteries after the UPS failed. but its displaying battery disconnected when i try to power it. i cant seem to figure the problem. i tried...


Did your UPS display "Battery disconnected" or did it display "Battery Failure"? If it was "Battery Failure", for some reason the Powerware 9120 will take almost 18 hours after plugging in to power after battery replacement to correct the Battery Failure indication. Charger has to charge up the batteries, followed by an automatic battery test by the UPS. If the indication was "Battery Disconnected", you will need to check the internal fuses to see if they are blown. If the UPS keeps blowing fuses, it will require a board repair.

Jun 12, 2011 | Powerware 9120 UPS System

1 Answer

We had a power outage for about 45 minutes a few days ago. Ever since then the Powerware 3110 has been beeping. I turned it off and left it plugged in overnight and when I turned it back on the beeping...


This could be several things, fortunately the device should actually be helping you to diagnose the issue. There are different beeps for different issues. They are as follows:

1 Beep Every 5 Seconds = Power Outage\Loose Plug Connection\Tripped Circuit Breaker\Power Cord Damage or Failure

2 Beeps Every 5 Seconds = Low Battery Alarm

3 Beeps Every 5 Seconds = Battery Needs Charging\Service\Replacement

3 Beeps Every 5 Minutes = The Battery is discharged and battery power is unavailable (If this continues battery replacement may be necessary)

1 Beep Ever 1/2 Second = Power Requirements exceed the UPS Capacity (remove some equipment to lighten the load on the unit)

Continuous Beep = Short Circuit / Input Voltage out of Range / UPS Fault (Likely replacement of entire unit)

That should help diagnose the actual issue. If it turns out the battery needs to be replaced they can be found online for around $20. A simple google search for Powerware 3110 Battery should return what you're after. Good luck!

May 05, 2011 | Powerware 3110 UPS System

2 Answers

Need to locate someone to install batteries into our UPS Powerware 2000. Location, Tempe, AZ (Phoenix, AZ)


Try contacting Eaton. They bought Powerware about 6 years ago and the personnel are trained on older Powerware systems. If you have the part number and serial number from the rating label on the UPS, that would be helpful.

Toll Free: 1 800 356 5737
E-mail: SinglePhaseTS@eaton.com

Nov 24, 2010 | Exide /Powerware PowerWare 2000 UPS...

2 Answers

I need the electrical diagram of prestige ups 3000


Try the legacy products page on eaton.com/powerquality (go to products and services and then click on the legacy products link) or call 800-356-5794. http://powerquality.eaton.com/Products-services/legacy/prestige-info.asp

Jul 23, 2010 | Compaq Powerware Prestige 3000...

2 Answers

How replace I the batteries?


You can't replace the UPS batteries as it requires Expert help.

Revert back for more assistance.

Jan 20, 2010 | Compaq Powerware Prestige 6000 UPS System

2 Answers

The UPS dont go to on batteri


Replace the batteries with new one then power the UPS without load for three hours or more so that the batteries can be charged. Then disconnect or switch off power to the UPS and observe if it will till be on using the batteries. If it will be ON then your problem is solved but if it goes off then your UPS is on BYPASS

Apr 09, 2009 | Powerware 9120 UPS System

1 Answer

Powerware 9120


Greetings!
How many years is your ups working? UPS is usually run by a battery, some of them are disposable and needs replacement. If it does not charge anymore it needs replacement of battery.
Thanks.

Nov 06, 2008 | Computers & Internet

1 Answer

Keeps making a beeping noise


Hi, if the unit is fairly new, you may want to claim warranty check or replacement. If it has been used for some time, it may be that: 1) the battery is dying, 2) not getting enough charge or 3) too much load. For 1, battery replacement might be required. Care should be taken since this requires opening the enclosure, removing the old battery (might have acid leaks) and replacing with a new one. For 2), any competent techncian could diagnose and repair. For 3) try removing all other loads to the UPS and just run the PC with the monitor and see if the problem still exist. Hope this works for you and please let me know how things trun up. Regards.

Apr 09, 2007 | Powerware PowerRite Plus UPS System

Not finding what you are looking for?
Powerware Series 9 Prestige 1000 EXT (PX01032SH) UPS System Logo

1,032 people viewed this question

Ask a Question

Usually answered in minutes!

Top Powerware Computers & Internet Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Jax Planet
Jax Planet

Level 2 Expert

921 Answers

Are you a Powerware Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...