Question about Whirlpool 30" Self-Cleaning Freestanding Electric Range - White-on-White
Kenmore 911-47629 Dbl Wall oven. At the end of the self cleaning cycle, I heard a loud POP and the breaker tripped. I reset the breaker and now the oven element and broil element will not work. the clock, timer and light function fine. I can hear the control unit click when I turn on the oven, but it won't heat up. I can't find a thermal fuse in the parts book and took the control unit out and saw no arcing marks.
Any suggestions would be greatly appreciated
Bill ,i dont suspect the control unit is the problem im going back to the loud pop you heard I would say the pop you heard was one of the elemants blowing and that the reason the the breaker tripped if you say the clock,timer and light functon are ok it more so points to an elemant in most cases when an elemant blows it breaks the circuit .but the other componants also work when you reset the breaker i think in this case bill i would call a electrician it needs testing,sorry i could not help this time bill,but do not hesatate to contact me if i can help you again.adrian
Posted on Feb 14, 2009
Tips for a great answer:
Jan 03, 2015 | Kenmore 30 in. Electric Self-Clean Single...
Sep 26, 2014 | Kenmore 30 in. Electric Self-Clean Single...
Hello - Before using the self-cleaning cycle of the appliance, remove the broiler pan and any utensils stored in the appliance. Also remove any excess spillovers in the oven cavity. Allow the oven to cool before cleaning. During the self-cleaning cycle, the outside of the wall oven can become very hot to the touch.
Typically to set the controls for a self-clean the first step is to confirm that the clock shows the correct time of the day. Press CLEAN. "---" appears in the display. Press the UP ARROW or DOWN ARROW once. "3:00" appears in the display for a 3 hour cycle. To change to a 2 hour cycle press DOWN ARROW"2:00" appears in the display. As soon as the controls are set, the motor drive lock will begin to close automatically and the "LOCK" indicator light will flash. DO NOT open the oven door while the light is flashing (it takes about 15 seconds for the over door to lock). "CLn" will appear in the display during the Self-Clean cycle and the "LOCK" light will glow until the Self-Cleaning cycle is complete or cancelled and the oven temperature has cooled.
When the Self-Clean cycle has completed, the time of the day or "End" will appear in the display window and the "Clean" and "LOCK" light will continue to glow. Once the over has cooled down for about 1 HOUR and the "LOCK" light has gone out, the oven door can be opened. If "End" is the display and the Clean indicator light remains ON, press CLEAR/OFF. The time of the day will appear in the display.
If it becomes necessary to stop or interrupt a Self-Cleaning cycle, press CLEAR/OFF. Once the oven has cooled down for about 1 HOUR and the "LOCK" light has gone out, the oven door can be opened. Restart the Self-Clean cycle once all conditions have been corrected.
Oct 19, 2012 | Frigidaire GLEB27S7A Electric Single Oven
Nov 09, 2010 | Kenmore 40494 / 40495 / 40499 Electric...
Aug 07, 2010 | Frigidaire 30 in. Electric Gallery Series...
Mar 13, 2010 | Frigidaire 27 in. Electric Double...
Nov 13, 2008 | Kenmore 40494 / 40495 / 40499 Electric...
Aug 03, 2008 | Kenmore 42161 / 42169 Electric Single Oven
474 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: