Question about EliteGroup ECS P4M800-M Socket 478/P4M800/FSB800/A&V&L/M-ATX Motherboard (MOTEC18)

1 Answer

Factory settings I have a used computer running Windows XP with an existing password on it which I don't know. I have tryed pulling the battery out with no luck, does anyone know where the reset pins are on a ECS 761GX-M754 V:1.0 motherboard

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

The reset pin is located by the arrow in this picture

Factory settings - ea00f8c.jpg

Posted on Feb 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can not find jumper switch for Dell GX280 to remove password.Where do I find it or is there another way?


Hi there, For the GX280, you don't use a jumper to reset the BIOS password. You can reset the BIOS by pulling out the motherboard battery. The battery is on the opposite side of the external ports, and is flat and silver.
Power down and unplug the computer, then remove the battery for 10 seconds. Put the battery back in, then power up the computer. There should no longer be a password. If it is a Windows password you are talking about, you will need to reinstall Windows. Please let me know if that is the case. Alex

Jun 04, 2011 | Dell Optiplex GX280 (99301) Motherboard

3 Answers

Hello, My name is Vahe and I have got the following problem, I have forgot my BIOS password and I can't to turn on. Laptop model Toshiba satellite A200-13M. So I have got some solution to delete...


The most common way that most of us know on how to reset or clear the BIOS password is to physically remove the power from the computer by disconnecting the power plug and then removing the cmos battery for 30 minutes from the motherboard. Another way is to reset the clear CMOS jumper on the motherboard itself. Both of the 2 methods mentioned works because most motherboards use a battery to sustain the BIOS/CMOS settings for the motherboards PROM chip. So by cutting off cmos the battery power, the BIOS/CMOS settings will be erased. Hope this helps

Jun 02, 2011 | Toshiba (K000002020) Motherboard

1 Answer

Good afternoon I have one mini600 and I forget pasword to me that I must do?


The most common way that most of us know on how to reset or clear the BIOS password is to physically remove the power from the computer by disconnecting the power plug and then removing a battery for 30 minutes from the motherboard. Another way is to reset the clear CMOS jumper on the motherboard itself. Both of the 2 methods mentioned works because most motherboards use a battery to sustain the BIOS/CMOS settings for the motherboards PROM chip. So by cutting off the battery power, the BIOS/CMOS settings will be erased.

Under the keyboard or bottom of laptop - If you are working on a laptop computerthe location of the dipswitch (almost never a jumper) can be under the keyboard or on the bottom of the laptop in a compartment such as the memory compartment.

If it fails, then try to remove the battery for at least one hour.

click start control panel Open User Accounts in Control Panel. On the Users tab, click the name of the user whose password you want to change, and then click Reset Password. In New password and Confirm new password, type the new password, and then click OK. Notes You can change passwords only for local computer accounts, such as guest, administrator, or accounts you create for your computer. You cannot change your network logon password in User Accounts. To change your own password, press CTRL ALT DELETE and then click Change Password

or

Ebay you can purchase a Password Unlock/Recovery For Windows 2000/XP/Vista/7

Item title Password Unlock/Recovery For Windows 2000/XP/Vista/7

Buy It Now price: US $1.49 (Approximately AU $1.50)
also

You need to prepare:
1:A blank CD/DVD or USB flash drive
2.A computer which can link to internet
3.A program called Windows Password Recovery 6.0

Get started with this 3 simple steps:
Website: http://lost-password.net/products/windowspasswordrecoery.html
Step 1 - Download windows password recovery utility and install it.
Step 2 -Burn your Windows Password Reset CD:
To burn your CD, you'll need a blank CD-R and the .ISO file of Windows Password Reset.
Step 3 - Put in your newly created CD and remove your Windows password.
don't forget to vote

hope it helps.

don

Mar 10, 2011 | Motherboards

1 Answer

I like to Restore System To Factory Default I have lost my Password to Empowering Technology for Acer Aspire M1610


The most common way that most of us know on how to reset or clear the BIOS password is to physically remove the power from the computer by disconnecting the power plug and then removing a battery for 30 minutes from the motherboard. Another way is to reset the clear CMOS jumper on the motherboard itself. Both of the 2 methods mentioned works because most motherboards use a battery to sustain the BIOS/CMOS settings for the motherboards PROM chip. So by cutting off the battery power, the BIOS/CMOS settings will be erased.

Under the keyboard or bottom of laptop - If you are working on a laptop computerthe location of the dipswitch (almost never a jumper) can be under the keyboard or on the bottom of the laptop in a compartment such as the memory compartment.

If it fails, then try to remove the battery for at least one hour.

click start control panel Open User Accounts in Control Panel. On the Users tab, click the name of the user whose password you want to change, and then click Reset Password. In New password and Confirm new password, type the new password, and then click OK. Notes You can change passwords only for local computer accounts, such as guest, administrator, or accounts you create for your computer. You cannot change your network logon password in User Accounts. To change your own password, press CTRL ALT DELETE and then click Change Password

or

Ebay you can purchase a Password Unlock/Recovery For Windows 2000/XP/Vista/7

Item title Password Unlock/Recovery For Windows 2000/XP/Vista/7

Buy It Now price: US $1.49 (Approximately AU $1.50)
also

You need to prepare:
1:A blank CD/DVD or USB flash drive
2.A computer which can link to internet
3.A program called Windows Password Recovery 6.0

Get started with this 3 simple steps:
Website: http://lost-password.net/products/windowspasswordrecoery.html
Step 1 - Download windows password recovery utility and install it.
Step 2 -Burn your Windows Password Reset CD:
To burn your CD, you'll need a blank CD-R and the .ISO file of Windows Password Reset.
Step 3 - Put in your newly created CD and remove your Windows password.

Here are a few things you can do or try

Restart the computer. If you are already in Windows, you can do this from the Windows Start menu, go to Turn off computer and click Restart. As the computer restarts, watch for a progress bar at the bottom of the screen. press F8 about once every second. Immediately press F8 before the progress bar reaches the right side of the screen. From the Windows Start-up menu, highlight Safe Mode and press Enter. Wait for your desktop to appear, and then make the necessary repairs (for example, uninstall programs or devices). When the repairs are done, restart the computer, and allow it to boot normally.

Alternate:

From the Windows Start menu, click Run. In the Open field, type MSCONFIG and click Ok. On the BOOT.INI tab, check /SAFEBOOT. Click Restart when prompted. Turn Off the computer, now as soon as you hit the power button, keep on holding "Alt" key & keep on tapping "F10 key,ie: Alt+F10, it will open the recovery console ,select full factory restore and follow on screen instruction. (Note:this will erase all datas on the computer) or Turn Off the computer, now as soon as you hit the power button, keep on holding "Alt" key & keep on tapping "F10 key,ie: Alt+F10, it will open the recovery console ,select full factory restore and follow on screen instruction. (Note:this will erase all datas on the computer) or During the boot process you will see on the screen to press a certain key to enter setup Press and hold that key during the boot up process to enter BIOS you can load failsafe defaults or load optimized defaults ,press escape then press f10 to save to cmos to restart


hope it helps.

don't forget to vote

Feb 26, 2011 | Motherboards

1 Answer

How can i crack dell password


Remove a small coin sized CMOS battery to store all BIOS settings along with the password. To reset the password, unplug the PC, open the cabinet and remove the CMOS battery for approx. 15-30 minutes and then put it back. It'll reset all BIOS settings as well as the password and you'll need to re-enter all settings.

Under the keyboard or bottom of laptop - If you are working on a laptop computerthe location of the dipswitch (almost never a jumper) can be under the keyboard or on the bottom of the laptop in a compartment such as the memory compartment.

If it fails, then try to remove the battery for at least one hour.

click start control panel Open User Accounts in Control Panel. On the Users tab, click the name of the user whose password you want to change, and then click Reset Password. In New password and Confirm new password, type the new password, and then click OK. Notes You can change passwords only for local computer accounts, such as guest, administrator, or accounts you create for your computer. You cannot change your network logon password in User Accounts. To change your own password, press CTRL ALT DELETE and then click Change Password

or


Ebay you can purchase a
Password Unlock/Recovery For Windows 2000/XP/Vista/7

Item title Password Unlock/Recovery For Windows 2000/XP/Vista/7

Buy It Now price: US $1.49 (Approximately AU $1.50)
also

You need to prepare:
1:A blank CD/DVD or USB flash drive
2.A computer which can link to internet
3.A program called Windows Password Recovery 6.0

Get started with this 3 simple steps:
Website: http://lost-password.net/products/windowspasswordrecoery.html
Step 1 - Download windows password recovery utility and install it.
Step 2 -Burn your Windows Password Reset CD:
To burn your CD, you'll need a blank CD-R and the .ISO file of Windows Password Reset.
Step 3 - Put in your newly created CD and remove your Windows password.
don't forget to vote

hope it helps.

don

Feb 24, 2011 | Dell Motherboards

1 Answer

I forgot my password for my samsung sunburst and i need to know how to change it with out knowing the password


if you did not make yourself the administrator of your computer

When you boot up to the log in screen type in administrator as the user to log in once you have your computer running again you have to take control (administrator)control panel user accounts on the users tab,click the name of the computer administrator you can change the password there or if your computer has a system restore you can restore it to an earlier date which will have your personal settings

also you might try

during the boot up process you will see on the screen for a short amount of time press a certain key to enter set up

Press and hold that key during the boot up process to enter BIOS scroll down to set user password or supervisor password you can change or remove your password from there

also

click start control panel user accounts

on the users tab,click the name of the computer administrator you can change the password there

if you still cant get into your computer

Remove a small coin sized CMOS battery to store all BIOS settings along with the password. To reset the password, unplug the PC, open the cabinet and remove the CMOS battery for approx. 15-30 minutes and then put it back. It'll reset all BIOS settings as well as the password and you'll need to re-enter all settings.

Under the keyboard or bottom of laptop - If you are working on a laptop computerthe location of the dipswitch (almost never a jumper) can be under the keyboard or on the bottom of the laptop in a compartment such as the memory compartment.

If it fails, then try to remove the battery for at least one hour.

click start control panel Open User Accounts in Control Panel. On the Users tab, click the name of the user whose password you want to change, and then click Reset Password. In New password and Confirm new password, type the new password, and then click OK. Notes You can change passwords only for local computer accounts, such as guest, administrator, or accounts you create for your computer. You cannot change your network logon password in User Accounts. To change your own password, press CTRL ALT DELETE and then click Change Password


Ebay you can purchase a
Password Unlock/Recovery For Windows 2000/XP/Vista/7

Item title Password Unlock/Recovery For Windows 2000/XP/Vista/7

Buy It Now price: US $1.49 (Approximately AU $1.50)

hope this helps


hope this helps

Feb 03, 2011 | Motherboards

8 Answers

How to reset windows xp perfessional password


Here's how to reset your password:
  1. First reboot Windows XP in safe mode by re-starting the computer and pressing F8 repeatedly as the computer starts up.
  2. Then (in safe mode) click Start and then click Run. In the open box type "control userpasswords2" (without the quotes, of course)
  3. You will now have access to all the user accounts, including the administrators account and will be able to reset the lost password.
  4. Just click the administrators user account (or the target user's account), and then click Reset Password. You will need to add a new password in the New password and the Confirm new password boxes, and confirm by clicking OK.
  5. All done, you have recovered the lost password
Hope you'll have it resolved soon :-)

Jul 30, 2010 | Motherboards

5 Answers

Can't remember my password on hp 6000 computer how


Are you talking about the BIOS password, or the windows password?
A hard reset will probably reset your BIOS password (see this thread),

To reset your windows password, you need your XP CD-ROM and follow this instruction.

Jan 02, 2010 | HP Pavilion dv6000 dv6100 dv6200 dv6300...

1 Answer

Reset to factory settings


Please view
http://www.turboimagehost.com/p/1280312/Untitled.jpg.html

The indicated area contains a Jumper. If you set this jumper with the power on for 15 seconds it will reset the bios back to manufacturers default settings

Feb 02, 2009 | EliteGroup ECS P4M800-M Socket...

1 Answer

I was given a used ECS computer running Windows XP, it has an existing password that I do not know. I would like to reset it to original factory settings if possible. The motherboard is 761GX-M754 V: 1.0


To reset the bios password: Remove the cmos battery for about 5 minutes, replace & reboot. Hope this helps & please remember to rate my answer. Thanks.

Feb 02, 2009 | EliteGroup ECS P4M800-M Socket...

Not finding what you are looking for?
EliteGroup ECS P4M800-M Socket 478/P4M800/FSB800/A&V&L/M-ATX Motherboard (MOTEC18) Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top EliteGroup Motherboards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Mark Taylor
Mark Taylor

Level 3 Expert

728 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Are you an EliteGroup Motherboard Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...