Question about Gateway Belkin 54g Wireless DSL/Cable Router (DHF5D72304)

1 Answer

Open NAT with Thomson (Speedtouch) TG585 v7 Router

So I've got my broadband connection set up and Xbox live is working at last. However, when my friends try to party up with me, it doesn't work. Tested connection, points towards a strict NAT. So I need an open NAT and after countless hours searching, I've tried portforwarding and dropping firewalls but to no avail.

It's a Thomson/Spedtouch TG585 v7 router, my PC connects to it wirelessly and my 360 connects by LAN to the PC. PC uses XP.

Any questions/things I've not added that I need to.... just ask!

Thanks

Posted by on

  • Anonymous May 09, 2009

    It's just a matter of turning the NAT settings from "Strict" or "Medium" to "Open". You have the same problem as me on the same modem. I PM an expert on the modem about this problem and waiting to hear back from him. I'll let you know if he solves the problem.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 77 Answers

First, try adding a wireless card to the Xbox, run the wireless off of the router OR if you have multiple connections (broadband, should be an "In" port, and several "Out" ports) Try connecting your PC and you Xbox through the "Out" ports, with the cable modem cord hooked into the "In" port...

Posted on Feb 04, 2009

  • Aceyman Oct 27, 2010

    On the thomson tgt585 v7 on the configuration screen select custom setup rather then default this enables no NAT (open). Hope this helps.

    Thanks

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My router is on, and is hooked up to my verizon modem. My xbox 360 and my computer are both hooked up to the router and all the lights are on but only my computer is working for the internet where my 360...


with verizon, you need to set the modem to full bridged mode so that the connection from your modem will be opened. This certain firewall is called NAT. Your modem and your router has this feature. To disable NAT on your modem, you need to set it to full bridged mode. To disable the NAT on your router, you need to open ports on your router.

You need to open this port on the router for Xbox live to work
TCP: 80, 3074, 53



UDP: 88, 3074

forward it to the ip of your Xbox.

this should set the NAT on your xbox to open, not moderate.

Sep 18, 2010 | Dell TrueMobile 2300 Wireless Broadband...

1 Answer

How do i set nat settings for lynksys Wireless-G Broadband Router for xbox 360


LINKSYS ::::

NAT STRICT

Step 1 : Connect Router - Computer

Step 2 : open Router Setup by typing http://192.168.1.1 on the address bar of internet explorer (Default Password is Admin )

Step 3 : Click Applications and Gaming

Step 4 : Click DMZ

Step 5 : Select Enable and Give the IP Address of the XBOX/PS3/Wii in it

Step 6 : Click Save settings

Step 7 : Unplug the Power cord from the router and turn Off XBOX /PS3/Wii

Step 8 : Plug the power cord back to the router and wait till the lights are Solid

Step 9 : Turn on the Xbox/PS3/Wii

Step 10 : Test the Connection

let me know if this works

Regards
TOM

Aug 10, 2010 | Linksys Wireless-G Broadband Router

1 Answer

Xbox live does not work properly


nat is quite crazy when it comes to the xbox, their are many ways of changing your nat back to open here is the easiest, on network settings on your xbox change the network from manual to automatic or from automatic to manual if you don't know how to make your network from automatic to manual go get a computer with wirless internet connection, *note the next steps i am about to tell you are for xp if you have vista or windows 7 you might figure out what im doing and use the vista or win7 way to pull up the info if you need to know* go to start, connect to wireless connection, support, details. these are the information you need to know write all of them down then type them in on your xbox but when you get to ip address type everything in but the last number and instead of the writen last number place a number one above it like if the last number was 4 the place 5 but if you test network and that does not work make it 6 ect. then your nat will be open again.

Dec 23, 2009 | Linksys Wireless-G Broadband Router

1 Answer

Switching from moderate NAT connection to an open NAT connection


yo tengo problema co el asistente de conexion del linksys

Feb 10, 2009 | Linksys WRT160N Wireless Router

1 Answer

How do i change my NAT connection from moderate to open


This one is simple. Find the IP address that your Xbox is assigned by your router, then put it into the DMZ. This also goes for PS3 users who are having trouble with internet access.

Feb 10, 2009 | Linksys WRT160N Wireless Router

2 Answers

Change NAT to open


You need to open all the ports for the xbox live. The NAT of that router model cannot be configured to open. Its just a simple NAT for internet connection.

Feb 09, 2009 | Linksys WRT160N Wireless Router

3 Answers

Change NAT to open


Ok kids... all you hve to do is log in to your belkin 54g at http://192.168.2.1

Find out what ip address your xbox is using and then Click on the DMZportion of your settings on the left hand side of the page.

Enter the xbox's ip address and click the enable box.
Click apply.


Your NAT will now be OPEN!

Cheers!

Mar 24, 2008 | Linksys WRT54GL Wireless-G 54Mbps...

Not finding what you are looking for?
Gateway Belkin 54g Wireless DSL/Cable Router (DHF5D72304) Logo

18,924 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gateway Routers Experts

Steve

Level 3 Expert

3287 Answers

k24674

Level 3 Expert

7987 Answers

Justin
Justin

Level 3 Expert

2072 Answers

Are you a Gateway Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...