Question about Xerox Phaser 8500/DN Printer

1 Answer

Tectronix phaser 850 has error 15.00045:246 181

Will not print or go past this message help

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,072 Answers

The drum heaters are bad. The way to determine that easily is to turn the lights off in the room where the printer is located, Turn the printer on, and look at the right side of the machine. You will see a vented, or sloted area where there is a fan. Watch in there for a minute or two and see if you see a glow inside the machine, I seriously doubt you will. If not, those heat lamps are out. They are simply 2,, 150 watt halogen lamps. You can pick them up at Lowes, Home Deopt etc, anywhere that carries halogen lamps. They take about an hour to an hour 15 minutes to replace. Cost less than $20.
If you determine they are not coming on and want directions on how to replace them. let me know, I will type them out to you.

Posted on Feb 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is it I receive an error message "undefined" Offending Command: Operand Stack? What do I need to fix this?


This is an issue between the file you're trying to print and the printer not being able to read it correctly.
Try copying it and pasting it in a new document (preferrably different program) If that doesn't work, try to install and use another driver

Jan 20, 2015 | Xerox Phaser 6200N Laser Printer

1 Answer

Phaser 8560DN Printer ~ Error Message


An error code due to the print head, check the waste tray area for a spill, has the printer been moved lately? remove left cover and look for spill.
-Carl, please let me know if this helps.

Jun 25, 2009 | Xerox Phaser 8560DN Printer

1 Answer

Printer error 15.004.45.433219 on Tektronix Phaser 860dp


Hi juniorgona:

15,004.45:
TCD_THERMISTOR_
SLOW
Most likely cause is a failed drum heater. The head to drum gap
should only be checked or adjusted on the Phaser 840. The
Phaser 850 and 860 have a pre-adjusted head.

Hope that this helps.

Apr 08, 2009 | Office Equipment & Supplies

1 Answer

Xerox Phaser 850. Unexpected repeat printing


If I remember correctly, disconnect the print cable, then reboot the machine.
I saw that problem once and its been a while, but I do believe thats how I finally got it to stop.
Then clear out the print queue.

Mar 31, 2009 | Xerox Phaser 850DP Thermal Printer

1 Answer

Error 15 004 45 37888


From the service manual:

15,004.45:
TCD_THERMISTOR_
SLOW
Most likely cause is a failed drum heater. The head to drum gap
should only be checked or adjusted on the Phaser 840. The
Phaser 850, 860, and 8200 have a pre-adjusted head.

In other words, you need to replace the drum heater.

Thanks and please take a moment to rate as fixya.


Mar 13, 2009 | Xerox Phaser 8200 Laser Printer

1 Answer

Xerox tektronics phaser 850- media jam


The preheat entry sensor assembly probably has broken sensor arms, and will need replaced.

Jun 13, 2008 | Xerox Phaser 850 Printer

1 Answer

Tektronics phaser 850 - media jam


Exactly what 2 of mine are doing. I have no clue on how to fix this so if you find a solution let me know via e-mail if you can. My e-mail is Seeley4859@gmail.com

Thank You

Jun 12, 2008 | Tektronix Phaser 860DP Thermal Printer

2 Answers

PRINTING ERROR


> Home > Support & Drivers > Knowledge Base

Solution --> ERROR 0082" name="Note" /> Phaser 790 / DocuColor 2006 Printer's: Cancel print job and cycle the printer's power

  • On the printer's Control Panel, press the Cancel Key (12 KB).
    Note: The READY message may only appear briefly. You may need to keep repeatedly pushing the CANCEL key.
  • If the error message persists, turn the printer off for at least 30 seconds and remove the computer interface to the printer (17 KB) before turning the printer back on.
  • Use the menu keys to perform a front panel reset (under RESETS menu).
  • If the printer redisplays the error message upon reboot, a file is likely STUCK at the front of the print queue. Use the front panel RESETS menu to CLEAR LOGS AND QUEUES, which will delete all print jobs in the printer's disk spool.
    Note: The READY message may only appear briefly. You may need to keep repeatedly pushing the MENU key to gain access to the front panel menu.
  • If the front panel menus can not be accessed turn the printer off for 30 seconds and then turn the printer back on.
  • If it is known which print job was last sent to the printer, try to reprint the last job spooled, which may be the cause of the error. Step 4 on clearing logs and queues may need to be repeated to eliminate the crashing job.
Note: Most XX82 or XX1E front panel error messages are NOT hardware related, but caused by a specific print job or application.

Mar 04, 2008 | Tektronix Phaser 860DP Thermal Printer

2 Answers

Phaser 860 error code 07.003.45:116163


It is a print head tilt error.
Most likely ink is in the stainless steel pivot block at the bottom of the print head.
Also the printer could have been unplugged and the cleaning blade is stuck to the print head.
Or a cable is binding the print head movement.

Nov 12, 2007 | Tektronix Phaser 860DP Thermal Printer

Not finding what you are looking for?
Xerox Phaser  8500/DN Printer Logo

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Office Equipment & Supplies Experts

Whit
Whit

Level 1 Expert

185 Answers

iteminconline

Level 2 Expert

110 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Xerox Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...