Re: I get a code 7 U in the VCR window and cannot tape...
I'm betting on a dirty mode switch, a rotary switch operated by the gear system. Try spraying some electronic parts cleaner into it, the type that does not leave behind a lubricant (as tuner cleaner does).
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
There is an SMPS unit that powers the set. You could have a failed driverr in this section. check out the input side for short in capacitors, bridge rectifier,SM driver or a mains protector. It will easy to identify by having a continuity tester for identifying the short. replace with the same type. good luck
You need to go into the menu and look for timer recording,then set in the channel,dateand time the program starts,then press the timer button.It will not start recording until it gets to the time the program starts.