Question about Acer X241Wsd Monitor

1 Answer

My acer monitor

I have a acer x241w monitor I plug it in turn it on the green light below comes on but nothing comes on the screen it is only a couple of yrs old

Posted by on

  • 1 more comment 
  • RBurch Feb 17, 2009

    I have owned the Acer X241W flat panel LCD monitor for a little more than 2 years now. I regularly suffered the infamous "no signal" problem, but was always able to bypass it with patience, and the "unplug/replug power cord" trick. Now the monitor doesn't display any picture. The green power light is on, but no picture. Unplug/replug does nothing. Normal power-off/power-on results in the Acer logo displaying for a SPLIT SECOND, then black screen, green power button and all.

    So yeah.

  • Anonymous Feb 18, 2009

    same thing

  • Anonymous Feb 25, 2009

    I had the exact issue too just within the past couple days

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

I have answered this in other threads but to reiterate....
The Gray rectangle "No Signal" I use a Power Strip and Turn off as soon as it cycles back to Normal screen. It is so much easier then to unplug and Plug back in when it does happen.
As for the Newer Problem(s) and I too have had mine for only couple of years... Copied from Previous post
This is not a Fix to the Problem, If you read some of the other "fixes" that relate to this you will see that it is a more serious problem and one that Acer should Do the Honorable Thing and have a Recall.
I actually went in side on three of the Same Monitors and one that was a 21 inch and found the problem is "HEAT"
You can see where a Board actually shows Browning on the Circuitry I am Going to try to order a new board P/N:AS08B360411.
I will update as soon as work is completed.

Posted on Mar 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

It wont turn on.


If the power light does not come on and it makes a screeching noise, most likely its broken. I would contact the manufacturor, in case some warranty left.

Jan 11, 2014 | Acer AL2216W LCD Monitor

1 Answer

X241W Acer monitor: getting blank screen. When unplugged and plugged back in, it powers up, stays on for about 10 seconds, then goes blank again. Green power light stays on. Have connected to different...


If you are going to DIY and have proper tools and know safety precaution then please read on:
Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply (they should be replaced in a set), blown fuses; poor solder joints, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed ACER monitors to get some ideas what to look for: http://s807.photobucket.com/home/budm/allalbums
Post back what you see inside so we can guide you further and it will help out other people in the future also.

Basic LCD monitor troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting

http://en.wikipedia.org/wiki/Capacitor_plague
Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.

Oct 15, 2010 | Acer X241Wsd Monitor

1 Answer

No Signal


yes start the computer then keep pressed the key F8 untill the display comes then hightlight the option last good known configuration and select the problem will be solved

Mar 06, 2010 | Acer 22" X223w LCD Monitor

1 Answer

I had to take my computer in for repair and turned the acer monitor off while the tower was gone. After plugging everything back in after repair, the monitor will not come on when you hit the power...


The first thing to check is , the Power, are ya sure it's plugged in OK, are ya sure that socket is working, try something else in that outlet to prove, check the power cord is pushed right in, Check ya on the right Video connector on the PC, make sure all conns are correct. Try the monitor on another base unit, try your base unit on another monitor. If all these are OK then ya Monitor has turned it's toes up sorry.

Jan 20, 2010 | Acer AL1914 19" LCD Monitor

1 Answer

No display


I think the problem is on the resolution, or you can change the video card, but if its happen to another computer..then u have to contact the ACER support center

May 27, 2009 | Acer Computer Monitors

1 Answer

Monitor comes up shows "acer" then says no signal and goes black


This Problem is Acer(s) Monitors. Though it is a nuisance one fix That has work for many is the Unplugging after it goes back to Good (viewable) screen.
I have hooked mine up to an inexpensive Power strip to make it easier for me and just turn off at time indicated above and Viola Simple is as Simple does :)

Apr 24, 2009 | Acer X241Wsd Monitor

1 Answer

LCD Monitor wount turn on Black screen


my Acer AL1716 monitor will not come on after pressing the on button and no green light.

Aug 25, 2008 | Acer AL1716B 17" LCD Monitor

1 Answer

Acer al1714


The problem may not be the monitor. Acer AL1714 is known for its weak power supply unit. Unplug power supply from monitor. If the green light on monitor comes on but goes out quickly, the power supply is the culprit!

Dec 28, 2007 | Acer AL1714 17" LCD Monitor

Not finding what you are looking for?
Acer X241Wsd Monitor Logo

Related Topics:

486 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer Computer Monitors Experts

 Elex
Elex

Level 2 Expert

49 Answers

yadayada
yadayada

Level 3 Expert

60792 Answers

John Trigg

Level 2 Expert

250 Answers

Are you an Acer Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...