Question about Printers & Copiers

1 Answer

How to turn off "toner Low"

I just added a new toner but the "toner low" which appeared before I changed it is still showing (even though I have added a new toner cartridge)

The business has Model #SCX-4216F, Serial No. B5DX800063N

Please forward your answer to me as soon as you can.

Thank you

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,602 Answers

THE PROBLEM IS IT IS DUE SOME SERVICE REQUIREMENT, THE CORRONA WIRES MAY NEED TO BE CLEANED, THE TONER USED CONTAINER MAY NEED SOME SERVICE, THE ROLLERS AND MACHINE MAY NEED DRUM CLEANED OUT, PRINT GET SERVICED AND THE SERVICE PERSON RESETS THE COPIERS DATA SO THE COPIER WILL NOT HAVE FUNCTION ERRORS AND BROKE DOWN MORE OFTEM DUE TO NOT BEING SERVICED ON A MONTHLY SERVICE, TONER CONTAINER MAY A FORIEGN MATTTER IN THE TONER TANK AND CAUSING THE SYSTEM THE TONER CARTAGE IS MALFACTION ERRORS.
IT HAS BEEN AWHILE SINCE I SERVICED A COPY MACHINE, SINCE 1980.

ROD

Posted on Feb 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i reset my printer? it always shows a LOW TONER, even though it was newly refilled. There is also a vertical line that appears on the side everytime I copy something (photocopy).


Step 1: Toner Reset Menu for Brother HL 3040CN and HL 3070CW
1. Open Cover where you can access toner cartridges
2. Press CANCEL & SECURE PRINT buttons at the same time and you'll see
the toner menus on the screen
3. Press + or - to navigate through to the toners you need to reset.
Note that each toner has 2 entries here, reset them both (STD means Standard, STR means Starter)
4. The OK button will reset of the toners.

Apr 18, 2011 | Brother DCP 9010CN - multifunction ( /...

1 Answer

Toner low warning still appearing CLX6210


some printers reset the counter when the instruction to change toner comes up. if it is merely warning you i would wait until the instruction to change appears

Jun 30, 2010 | Samsung CLX-6210FX Laser Printer

1 Answer

When i turn on my printer theres a message appear toner low


in your cartage have green cheap or fuse these are reseter. the are aviable in market .change it . then your printer can work. when are u getting tonner low. recently u shuld fill cartage. i think you get empty message. just reseting cartage by new reseter than u can change old reseter. u can 100% solve your problem thanks

Jun 19, 2009 | Samsung SCX 4521F All-In-One Laser Printer

2 Answers

Low toner advise keeps on after changing toner and/or printing


Have you tried to unplug your printer and plug it back in, that will force the printer to re-check all its settings and it should notice that the toner is now full.

May 27, 2009 | Dell 1110 Laser Printer

2 Answers

Copier makes faded copies, even though it has toner


the heater unit is the problem.
yo can get a repair kit by search on the Internet or go to Toshiba web site.
the repair kit come with instruction, if you can handle the mechanic part of things. then you are all set.

May 19, 2009 | Toshiba DP5570 Laser Printer

2 Answers

Hp laser 4500 says toner is low or out even after new cartridge


There is a toner sensor in this printer that shoots a beam of light through the toner cartridge. As long as the toner is full and blocks the light, it sees it as being full. If it were the sensor, it would tell you this for all the toners, though. The printer also calculates how much toner may have been used and gives warnings based on that. It could be that this isn't getting reset after you change toner. You can reset the toner gage by going into the reset menu and selecting "New xxxx cartridge" and changing it to YES.

Mar 17, 2009 | HP Color LaserJet 4550n Printer

1 Answer

CopyCentre C20 Toner Low Stays On


ave you tried shaking the cartridge vigorously from side to side?
The ink may be compacted in one end of the cartridge from storage.

Jun 06, 2008 | Xerox CopyCentre C20 Black and White...

1 Answer

False detection of toner low


Hello,

The only remedy you have now is to change the sensor , for this you have to refer to the product manual you can download it from

http://www.brother.ca/en/products/pdf/QSG/HL2030-QSUG.pdf

Good Luck

Dec 05, 2007 | Brother HL-2030 Laser Printer

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

330 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printers & Copiers Experts

kakima

Level 3 Expert

96396 Answers

old marine
old marine

Level 3 Expert

1461 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...