Question about Washing Machines

1 Answer

I have a bosch wvt 1260 gb washer dryer that is working fine but wont heat on the dryer cycle, tried a new element but still not working, have continuity through all the sensors and 230v between both ends of the element and earth, kinda stuck now.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

It appears your timer/main controller has failed in this instance.

For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...


FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 14, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need cleaning product for inside washer/dryer


you need Afresh this is the name of the product that is reccomended by Whirlpool

Mar 29, 2014 | Bosch Exxcel WVT 2850 Front Load Washer /...

1 Answer

Bosch washing machine WVT 126S, error F01 on the start. Please help


F01 means the machine thinks that you have pressed start and the door is still open, so, either the door is not completely shut or you will need a new door interlock (part number 182154) you can get the part by calling 0844 892 8979 (UK) or http://www.bosch-home.co.uk/customer-service/spare-parts-accessories.html. Or the connection to the door lock is not loose or detached.Hope this helps

Aug 28, 2011 | Bosch Exxcel WVT 2850 Front Load Washer /...

1 Answer

Hi, I've got a Bosch WVT 12840GB washer dryer and


the faster the spin the more you will enjoy the ironing?????? if you do a 1000 spin at the end of a wash see how it goes

May 25, 2011 | Bosch Washing Machines

2 Answers

Want to buy a new door seal for my bosch wvt 1260 washine machine. can you advise where? thanks


Bosch Exxcel WVT 2850 Front Load Washer / Dryer
how to change a door seal.
This video will show you how to change a door seal on this Bosch front loader washing machine and where to get a new door seal!

we have all
bosch repairs in our channel


Please remember to subscribe to our YouTube channel for all appliance tutorials

a 4 THUMBS rating is appreciated for answering your FREE question.


Mar 14, 2011 | Bosch Exxcel WVT 2850 Front Load Washer /...

1 Answer

Tumble Dryer is not working - it runs but there is no heat


Hi,

If you are having problems with your gas dryer not heating the most common problem is that the ignitor goes bad. Even though it glows sometimes it is still not working properly.


if you dryer is gas check out this gas no heat tip....


If you have an electric dryer, you can have many different things that can go wrong causing the dryer not to heat.


check out this electric no heat tip...


heatman101

Sep 24, 2010 | Bosch Exxcel WVT 2850 Front Load Washer /...

1 Answer

Drying cycle working but not drying clothes


First clean filter for lint - next be sure the temp sensor at blower if free of lint - next, in the heater contrl unit, two solinods contrl the heating process - I hope it's the first two ideas - Try it - Good luck

Oct 15, 2009 | Bosch Exxcel WVT 2850 Front Load Washer /...

1 Answer

Washing machine doesnt rinse and spin


IT SOUNDS AS THOUGH ITS NOT HEATING IF IT DOESNT IT STAYS IN WASH MODE AND WONT COMPLETE CYCLE NEW HEATER REQUIRED

Aug 12, 2009 | Bosch Exxcel WVT 2850 Front Load Washer /...

2 Answers

Bosch exxcel wvt1260


I have a Haire combo unit. (washer/dryer) The dryer is a condenser type. I had a this problem with the dryer part of my unit. It was still under warranty at the time so naturally I called. When the tech came out he discovered that the heating element had melted the fan all over the blower elements. this problem could have been fixed, however, Haire came out with a newer model and couldn't get the parts anymore because they weren't making them anymore. Needless to say that totally sucked. But, at least the washer still works great. Upon doing a little research, I discovered that most condenser dryers do get too hot to support one or more of thier internal elements. I would not get another dryer like this without asking about this problem and if there has been any rectification of this issue and how so.

Jun 23, 2007 | Bosch Exxcel WVT 2850 Front Load Washer /...

1 Answer

Bosch wvt 1260


dry heater is located under an aluminium housing on top of the machine. take it to bits and easy to fit. however, why do you need a heater? if no heat on dry, cause is probably overheat stat operated

Mar 30, 2007 | Bosch Classixx WVF 2402 Front Load...

2 Answers

Washer dryer


Here is the link for a manual for your washer/dryer if you need it; https://portal.bsh-partner.com/portal(bD1kZSZjPTAwOQ==)/PORTALFRAME.HTM sounds like the heating element has failed, or just possibly the thermostat for the hot air. follow this link for a list of spares if you want to try it yourself, or for bosch repair centre details if not. http://www.bshappliancecare.com/Bosch/boschspares.html ask if you want to do it yourself for any guidance you need. Hope this helps :)

Sep 29, 2006 | Bosch Logixx WFT 2806 Front Load...

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

180 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

yadayada
yadayada

Level 3 Expert

70346 Answers

Brad Brown

Level 3 Expert

15100 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...