Question about Printers & Copiers

1 Answer

Ricoh c3000 replace fuser error

I can't get the error to clear after replacing the fuser. the menu buttons are locked. is there a reset for this?
thanks
chris

Posted by on

  • tonerink Feb 03, 2009

    Hold the escape key for 5 seconds while powering up, this will clear the error "replace fuser"

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

printer error fuser temp.

Posted on May 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I clear SC542 error?


That is a fuser fault code will need to repair fuser first. If you buy the fuser might come with instructions to reset code.

Oct 22, 2015 | Ricoh Aficio Sp 3510sf All-In-One Laser...

1 Answer

How do i reset SC542 error in Ricoh Aficio SP300DN?


FOR RICOH AFICIO SP 3400SF follow below steps.

1. To access Service Mode, On Control Panel press following buttons one
by one immediately.

Cancel Button (Red) ---> 1 (Numeric One) ---> 0 (Numeric zero) ---> 7
(Numeric Seven) ---> Copy Button (Green)

2. In Service Menu you will find Engine reset Menu. In that you can reset
SC 545 in Fuser Reset Menu. And you can also reset SC 542.

Feb 23, 2015 | Ricoh Printers & Copiers

1 Answer

Copier Gestetner Dsc530 (or Ricoh Aficio mp c3000) has error SC501 - tried to reset, but need to replace thermistor. Can't find a diagram on where it's located on the fusing unit. Anyone?


Error code SC501 is not a fuser problem. It is the top paper feed tray. Take all of the paper out of tray 1 and turn the machine all the way off. Turn it back on. Code should be cleared. If it returns with no paper in it the paper feed station has a broken part and can only be repaired by replacing it.

Nov 04, 2013 | Gestetner Printers & Copiers

1 Answer

Error SC542


Thats a problem with the fuser not sensing the right temperature.
Try this.
Press the yellow clear all button, followed by 107 then press and hold the stop button until the screen changes. You should see a button on the screen that says. Copy SP. Press that.
Then power the machine off and on.
If that doesnt clear it then most likely you will need to replace the fuser thermistors.
Most of the time this reset will resolve it.

Apr 26, 2011 | Ricoh Printers & Copiers

2 Answers

Replace fuser E error


Reset Fuser counter Oki B6200 Action: Power on and wait until the ready to print message appears on the operator panel. Press "Select and the Down arrow button at the same time" The following Menu is displayed"Reset Counter Fuser U4" Press the right arrow button Operator Panel will display "Fuser U4 Use the SEL to Reset" Press the SELECT Button Operator Panel will read "Clearing" Press the Menu key to return to "Ready to Print Mode"

Apr 05, 2010 | OKI B6200 Laser Printer

1 Answer

Replace fusing unit error


Can you put the old fuser back, just to see if the message clears.

Mar 04, 2010 | Ricoh Aficio AP3800C Laser Printer

1 Answer

Replace Fuser error not clearing


Fuser PM reset

1. Hold the 'up' and 'down' arrows together for 5 seconds or longer.

2. Release the arrow keys and press the 'enter' key.

3. Select '2. Engine' - Then go to option '7.'

4. Go to SP7804-016 (PM Counter Reset>Fuser) and execute. Shows results=OK

5. Turn the machine off and on.

All done.

Mar 20, 2009 | Ricoh Aficio CL7200 Laser Printer

1 Answer

Part Number for RICOH Aficio MP C3000 Fuser Unit


Part number is: B237 4053 (North America)
B237 4054 (Europe)

I Expect this will be very expensive as it is not designed to be replaced as an entire assembly, but rather repaired as needed.

Feb 23, 2009 | Ricoh Aficio AP2000 Laser Printer

1 Answer

Ricoh c3000 replace fuser error


I am not sure if you can, but I had this issue too.

Go to the menu key. Use arrows to find "maintenance" and press enter.

Use arrows to go to Maint. reset and press enter.

Use arrows to display fusing unit and press enter.

It will tell you to press # - press enter.

If that doesn't work, you may also want to try pressing and holding the escape button for 5-10 seconds and it will reset itself.

Good luck!

Feb 02, 2009 | Ricoh Aficio CL3500N Laser Printer

1 Answer

Ricoh c3000 replace fuser error


try to unplug it from the wall and plug it back in and let me know if this works

Feb 02, 2009 | Ricoh Aficio CL3000 Laser Printer

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

319 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printers & Copiers Experts

kakima

Level 3 Expert

96396 Answers

old marine
old marine

Level 3 Expert

1461 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...