Question about Hannstar I-Inc TW-191D Monitor

1 Answer

Why does my monitor shut off when my pc is still on?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 54 Answers

It is part of your power management settings. It is possible to change this by right clicking on the desktop, choosing properties>settings>power management settings or energy start settings.
you can also access it from the control panel.

Let me know if this helped. If not we can trouble shoot further.
Please remember to rate me.
thanks and good luck

Posted on Feb 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

DA220HQL


If you have tried connecting and using the monitor on another PC and it works .... then it may be the connection (of the monitor to your PC), or the PC port that is not working.

If you don't have another PC to test the monitor, disconnect the monitor, shut down your PC, connect the monitor, restart your PC ... and hope for the best.

Feb 18, 2014 | Acer AL1916W 19" LCD Monitor

1 Answer

Every time I turn on my pc I have to hit auto adjust on the monitor to center the screen. How do I fix this problem?


By removing the plug and re-installing the plug you probably kill the monitor and it gave you it's last breath. Try to use some one else monitor to see if it is not a problem with the computer.

Mar 26, 2012 | Computer Monitors

1 Answer

I had a power failure in my area. When power was restored my pc booted up ok but the monitor screen only stays visible as it should for about 3 seconds, then it goes black screen. I have powered...


Close windows down. Wait 15 - 20 mins, then power monitor up but NOT windows. Screeen should say "NO SIGNAL in centre. If t does not, wait five mins If still no display shut down and wait another 5 mins. Then start monitor un ANDt windows.. All should be OK now, If not shut EVERYTHING down and disconnect from mains ovrernight. (PC riouter/modem,,,, EVERYTHING . 12 hours later, re-connetc in THIS order - 1.) MONITOR 2.) PC 3) ROUTER/MODEM Should be OK now.

Aug 17, 2011 | Acer X193W LCD Monitor

1 Answer

WHEN I SWITCH MY MONITOR ON ITS IT CUTS OUT BUT


I would check the power cable is inserted fully, then check PC to monitor cable is also inserted firmly.

If still same try monitor on another PC as it may be a video fault from PC.If it works OK on another PC then video card / mobo is faulty.
If your PC has a video card shut down PC pull power plug out of PC and remove replace video card, quite often fixes that problem.

Jan 26, 2010 | ViewSonic Optiquest Q19wb LCD Monitor

1 Answer

HP vs17 monitor shimmering, blurring for first time - had to shut down unresponsive video-to-DVD program while VCR was hooked up PC. Program running was VHStoDVD 4 by honestech. The program had a video...


I have reviewed your problem and have the fallowing for you to aces.
First, power off all devices and monitor.
Second. disconnect all devices from the PC and Monitor.
Please make sure the monitor is disconnected from it power source.
Next, hook up monitor to PC and start PC, along with monitor.
Next, enter menu on HP vs17 and reset.
Allow to run for ten or 15 minutes, watching the video on screen for imperfections.
If all looks OK, hook up your other devices and enjoy.
I hope this has helped you. Please let me know how things work out for you.
Please rate.... Thank you.

Nov 05, 2009 | HP Vs17 17" LCD Flat Panel Monitor

2 Answers

The monitor shuts off. Turning the power off


the monitor is going into power saving mode ... it can happen if it is not receiving any signal from the pc ( pc is not running or booted properly, bad video cable connection monitor to pc) or the pc is itself in suspend/standby mode.

Aug 08, 2009 | Princeton Digital Computer Monitors

1 Answer

Monitor just went blank, no power light.


Was the PC running, and then shut down? Or, did it never start in the first place?
It sounds like it could be one of many things. Sometimes if the processor fan has failed, the computer will start up, and then shut down. Also, bad memory can cause the PC to shut down.

Jul 05, 2009 | Samsung SyncMaster 940B 19" LCD Monitor

1 Answer

Monitor shuts off after initial start-up


My 17 inch Norcent LCD was doing the same thing. Then after a couple of weeks the AC adapter failed. I got a new ac adapter now LCD is working.

Nov 21, 2007 | Norcent Technologies LM730 17" Flat Panel...

Not finding what you are looking for?
Hannstar I-Inc TW-191D Monitor Logo

Related Topics:

156 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hannstar Computer Monitors Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Hannstar Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...