Question about Nortel T7316E 2-Line Corded Phone

1 Answer

How can I use the intercom to talk to someone in another room?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

FEATURE 66 AND THE EXTENSION NUMBER. PICK UP YOUR HANDSET AND TALK AND LISETEN. YOU CAN ABUSE THIS BY DOING IT WHILE SOMEONE IS NOT THERE AND THEN LISTEN WHEN THEY GET BACK. BE CAREFUL.

Posted on Feb 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I call a twin binatone cordless in another room


  • 1. In standby mode, press (intercom).
    • • Intercom is established immediately if there are only 2 registered handsets.
    • • If there are more than 2 registered handsets, the handset numbers which are available for intercom will be displayed.
  • 2. Press the handset number you wish to call or press * to call all handsets.
  • 3. Press (Talk) on a called handset to answer the internal call, where both internal callers can talk.
  • 4. To end the intercom call, press (End/off) on either handset.

Nov 27, 2015 | Binatone Phones

1 Answer

How can i do two way on panasonic 5.8ghz


These directions are for the KX-TG5451, KX-TG5452 and KX-TG5453.

If you want to use the intercom feature, you need to know the handset number for the unit you want to contact. The base is zero. The handset number is set when you register the handsets. So to communicate with the base, press Intercom on the handset followed 0. The base will ring until someone presses Call to answer it (or one minute whichever comes first). (Alternatively, you can use the up/down arrows to select H1, H2, H3 or Base. Then press the right arrow key.)

To communicate between two handsets, press Intercom and then 2 (from handset 1 or 3 to connect with handset 2). Again the handset will ring for one minute or until the person with handset 2 answers. (To answer, they can press the phone, speaker or intercom button.)

If someone at the base wants to use the intercom, they need to press Select until the appropriate handset number is displayed. Then press Call.

To transfer a call, press Intercom and then select the desired handset. When the intercom message is picked up, indicate that a call is being transferred and press Off at the handset or base that initially answered the call.

For a conference call, initiate the call then press Intercom and select the handset to join the conversation. Once that person picks up, then press Conf. (I believe that Conf is a softkey so check the display.) This is only possible with the handset. (Another handset can join the conference by pressing the phone or speaker button on that unit.)

The manual for the KXTG5453 is available here: http://service.us.panasonic.com/OPERMANPDF/KXTG5451S.PDF .

If you have a different model of the Panasonic 5.8 GHz phone, please add a comment with the model number and I'll try to give the directions for that unit.

I hope this helps.

Cindy Wells

Aug 11, 2011 | Panasonic KX-TG5453PK 5.8 GHz DSS Cordless...

2 Answers

Intercom does not work


There needs to be an additional instruction. I am having the same problem. From standby mode, I press Intercom, the screen says "Please wait" for 2-3 seconds, then I choose a handset. Nothing happens. The user guide doesn't have any additional instructions after this point. I don't hear any paging or anything other than silence on any handset.

Jun 15, 2011 | Uniden D16602 Twin Cordless Phone

2 Answers

Can't find my manual. How do I get the messages off the phone, it's a Magicbox Logan three dect thingy.. Also how do you get a conference call happening?


Hi
To delete messages you need to first listen to them all on your machine via the BASE, then after all the messages have been played (which can be very boring) press and hold the DEL button. It will then ask you to confirm deletion by pressing OK. Not too sure about the conference call as mine does not have it. If however someone else in the same room wants to listen to the caller you can press the handsfree button (speaker icon) on BASE. If you want to speak to someone within your household in another room, you need to press OK on HANDSET, then press down to INTERCOM, press OK again and it will give you several options, INTERCOM ALL (where all available handsets can talk to each other), or HANDSET 1 or 2 to select a specific one. Hope I have helped and it does not sound too gibberish!
Regards

Feb 04, 2011 | Phones

1 Answer

I am wondering how to intercom to another phone extension. I mean, where you call that room and can talk to them w/o them having to pick up the phone extension.


Providing that the handsfree answerback is turned on on the set your calling,you can use Voice call (feature 66) and the intercom of the person your calling.

Aug 12, 2010 | NorStar Meridian M7310 Phone

1 Answer

How do I make internal calls to another Panasonic KG-TGA711E handset in the house?


Making an intercom call
1 Press {INTERCOM}
2 Select the handset you want to page
by pressing the desired handset
number ({1} – {6}).
To stop paging, press {OFF}.
3 When you finish talking, press
{OFF}.
Answering an intercom call
1 Press {handset icon} or {speaker icon} to answer the
page.
2 When you finish talking, press
{OFF}.
Note:
When the ringer volume is set to off,
the handset rings at the low level for
the intercom calls.

Feb 20, 2010 | Panasonic (KX-TG1032S) Phone

4 Answers

How do i use the intercom on my Uniden dect. 6.0?


March 25, 2013 - INTERCOM INSTRUCTIONS
Here is the answer! Press the INTERCOM button one time.
The INTERCOM display will show on the screen.
Use the UP or DOWN arrow button to select the HANDSET number.
Press the MENU/SELECT button to ring the HANDSET selected.
Press the END button when done talking

Sep 01, 2009 | Uniden DECT 6.0 Cordless Telephone...

1 Answer

I can't set up the intercom system on my Avaya Partner ACS R7


To program a page button for other extensions.
At the phone, press Feature 00
press the LIGHTED button you want to program.
press the LEFT intercom button, followed by * (star) and the 2 digit extension number.
Repeat for more buttons.
Feature 00 when done.

Now you can just press the button, and it dials intercom *10 (example)

it will activate the speakerphone and you can talk.

Jul 09, 2009 | Avaya Corded Phone avaparp18d

2 Answers

Misplaced one of the phone


I looked up that model and they are equipped with intercom service.
What good would an intercom function (I ask myself) without some way to ring another handset? It wouldn't make sense to have to holler for someone else to pick a handset ;-)

The phone's control layout is identical to ours (it is 2.4 gHz instead) so check the lower right-hand corner for a button perhaps marked Hold & below it 'Intercom' printed.
Using that function, you choose the station # and it will ring the remote (lost) handset until someone picks it up and presses Talk or speakerphone button. .

Sep 03, 2008 | Panasonic KX-TG1033S Cordless Phone

1 Answer

How to use intercom between two handsets


For models with 2 or more
handsets included
Making an intercom call
1 Press {INTERCOM}
2 To page the base unit, press {0}.
To page another handset, enter its
extension number ({1} – {4}).
The destination unit beeps for up to 1
minute. Someone else can answer the other unit and talk to you.
3 To end the intercom call, press {OFF}.

Aug 18, 2008 | Panasonic KX-TG5632 Phone

Not finding what you are looking for?
Nortel T7316E 2-Line Corded Phone Logo

Related Topics:

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nortel Phones Experts

dan4261

Level 1 Expert

14 Answers

kakima

Level 3 Expert

96664 Answers

Cindy Wells

Level 3 Expert

4759 Answers

Are you a Nortel Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...