Question about JVC AV-48WP74 48" Rear Projection HDTV-Ready Television

1 Answer

I have a jvc av48wp30 tv and need a wire diagram

I have a jvc av-48wp30 that has a convergence issue. I replaced both ic's on the convergence board but I still had a problem so I started to check the components on the board and I have a resistor that is burnt out and I can't read the size. I would appreciate it if I could have a wire diagram for the convergence board. Thank you!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Looking the convergence board from the side of the resistors (The chips will be behind the resistors), you have from de left to right:

1.5 ohms, 150ohms, 220ohms, 2.2ohms, 3.3 ohms, 220ohms, 1.8ohms, 220ohms, 150ohms, 150ohms, 1.5ohms, and dispose horizontal in relation of the other resistors (the one near to the Ic is 2.2ohms and the other is 220ohms).

Hope this helps...

Posted on Feb 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My jvc model # av-48wp30 tv has a blue shadow


Convergence needs repair. The AV48WP30 convergence repair kit from www.tvrepairworld.com has the parts and the CD with step by step repair instructions.

Aug 08, 2010 | JVC AV-48WP30 48" Rear Projection...

4 Answers

AV-48WP30 - Is this a convergence board issue?


yes u r right that is the problem of convergence in your televisions.and it needs to be replaced to make it proper.
thanks.

Oct 29, 2008 | JVC AV-48WP30 48" Rear Projection...

1 Answer

Jvc av-48wp30 blue to align convergence


Tv colors R,G,B don't alignment any colors.Tv have a convergence problems,it dead.Tv convergence board require changes 2 STK convergence ICS and some or all it resitors to solved convergence problems.The shop will cost u $300-350 for parts and labors.

Jul 11, 2010 | JVC AV-48WP30 48" Rear Projection...

1 Answer

JVC AV48WP30 Projection TV..Half picture distorted and flickering


Ur convergence is dead.Must replaced the 2 convergence ICS and all it resistors.The shop will cost U $300 for parts and parts.

Feb 10, 2010 | JVC AV-48WP30 48" Rear Projection...

1 Answer

Our TV has, almost what appears to be, a double, colors are shadowing


You can get the JVC AV48WP30 convergence repair kit from www.tvrepairworld.com which should repair that issue. The kit contains the parts and detailed instructions on CD

Nov 23, 2009 | JVC AV-48WP30 48" Rear Projection...

1 Answer

JVC AV48WP30 convergence ic


I'm in the process of trying to replace both convergence IC's in my JVC also. I was able to buy both IC's (they look like black semi-rectangular components with 20 pins sticking out...like a computer chip only much bigger) at a TV repair shop for about $15 each. They were clearly labed STK392-110 (but could be 150 or 180 if you wanted to upgrade).

Jan 18, 2009 | JVC AV-48WP30 48" Rear Projection...

1 Answer

JVC AV-48WP30 48 in. Rear... Problem


Your convergence I.C's ( integrated circuits ) Have failed. Replace Both I.C's with Stk392-150's. The unit is equipped with 110's. These are large IC's pn the convergence board located near the front of the unit. You need soldering/desoldering experience to do this job. I would recommend seeking professional assistance.

Jun 04, 2008 | JVC AV-48WP30 48" Rear Projection...

1 Answer

Jvc av48wp30


Send them an email and mention that slinteriors asked them to give you a complimentary copy of the IC instructions, and they will . The head techs email is servicemanuals13@gmail.com

May 24, 2008 | JVC AV-48WP30 48" Rear Projection...

3 Answers

Convergence chips


The convergence IC or in a sense ,amplifiers and the resistor are output resistors... if they are burning up the current going through them is spiking too high... TO me this is an indication that the "convegence yokes" are shorted. These are coils around the tubes that control convergence. I would suspect maybe that these are shorted to ground somehow. This is my first guess for this problem

Feb 11, 2008 | JVC AV-48WP30 48" Rear Projection...

1 Answer

JVC AV48WP30 Rear Projection TV


There are a number of different STK type parts. You need to look on the old ones for the part numbers. May have to dissassemble the heatsink to see the number. STK is pretty good about its numbers and you should have no trouble finding them.
partstore,com
mcminone.com
nteinc.com

Dec 31, 2007 | JVC AV-48WP30 48" Rear Projection...

Not finding what you are looking for?
JVC AV-48WP74 48" Rear Projection HDTV-Ready Television Logo

Related Topics:

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Projection Televisions Experts

easy alberta
easy alberta

Level 2 Expert

132 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68386 Answers

Are you a JVC Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...