Question about Dataproducts 8524 Matrix Printer

Open Question

Manual for Dataproducts 8524 Dot Matrix Printer

Hi All,

Any luck that you know where this manual can be downloaded or found?
Need info for configuring the emulation mode since it had been changed inadvertently by some user....

many many thanks.

Posted by on

5 Suggested Answers

SOURCE: driver Dataproducts printer 8524

Thanks myob247 so much, I try to check and install it.
Tien

Posted on Jun 21, 2008

Wiired
  • 122 Answers

SOURCE: What Dot Matrix printers are XP compatible?

You can use the Epson LQ-2500 driver without issue.

Posted on Jun 22, 2009

  • 10 Answers

SOURCE: Looking to sell 2 Dataproducts 8524 printers. Any

Hi dont want to be rude but you are saying the old frase, worked well last time they were used several years ago. Well in all reality they will be really only good for parts as the printer heads will be dried up, the ink will be dried up, the moving parts as they havnt been used may need lubed, so really all you could do is eBay them as local pick up only for parts and maybe you may sell them. They are old and printers have advanced so much like all electronics tht they are so outdated.

Posted on Aug 30, 2009

  • 700 Answers

SOURCE: could not finda dataproducts 8524

once upon a time this was basic dot-matrix printer. legacy from that still exist, exact specs for that printer is here:

http://www.printersource.com/pages/data/8524spec.htm

this two sites provide drivers for it:

http://www.ookz.com.pl/8524/
http://www.driverstart.com/start544432.html

you did not provided what operating system you use, therefore these drivers maybe useless, if that is the case, plese try use generic drivers emulating any of the following:

ibm-2391
epson lq-2550
hp ruggedwriter 480
hp pcl3
ricoh series 5000
ricoh series 8524
ricoh series 8600

indeed, all these are interchangeable. hope this do solve your problem.

if you are happy with advice given please do not hesitate give me four hands and leave a note, thanx!

Posted on Jul 31, 2010

prashant2012
  • 1127 Answers

SOURCE: I need dataproducts 8524 prinetr

Hi


http://www.printersource.com/pages/data/8524spec.htm

this two sites provide drivers for it:

http://www.ookz.com.pl/8524/
http://www.driverstart.com/start544432.html

you did not provided what operating system you use, therefore these drivers maybe useless, if that is the case, plese try use generic drivers emulating any of the following:

ibm-2391
epson lq-2550
hp ruggedwriter 480
hp pcl3
ricoh series 5000
ricoh series 8524
ricoh series 8600

indeed, all these are interchangeable. hope this do solve your problem.

Posted on Jun 25, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My MX922 printer worked well this morning. All cartridges have ink but ALL lights under the cartridges are on and print comes out blank. There are no error codes or anything abnormal displayed


This problem is mainly happens to all inkjet printers. If your printer print blank pages then please at least once go to official site of Canon and check whether there is any printer/scanner drivers update is available or not. If yes then download it. Also check your ink cartridges. Because if there is no print on paper that means your ink might be dry.Sometimes it clog the print head. If your ink cartridges get dry change it. Or you should clean your printer's print nozzle by using printer's control panel. I hope all these suggestions helps you. If doesn't then watch Canon MX922 Manual English

Jan 12, 2017 | Canon Pixma MX922

1 Answer

HOW DO I un-lock the scanner on a Brother MFC 7420?


Unfortunately, the MFC-7420 doesn't have a physical lock switch. You need to turn off the all-in-one and wait for the unit to clear its memory. If the error recurs after you press the power button again, wait 30 minutes and try again. (Note: you will lose any faxes that are in memory. See the User Guide page 11-5 to save this information.) You can find the manual on the Brother support page for the MFC-7420: https://www.brother-usa.com/support/ModelInfo.aspx?R3ModelID=MFC7420 . Click on the Manuals & Documents tab. Then click on the Manuals on our Online Solution Center for the English version of the manual. The direct link to the User Guide is currently: http://download.brother.com/welcome/doc000387/ALLFB_UsaEngUsr_B.pdf .

You can also try unplugging the all-in-one for several minutes to reset the error codes. If the error persists, contact Brother if the MFC-7420 is still under warranty (1 year). If it isn't under warranty, consider replacing the unit. The repair costs may be unreasonable.

I hope this helps.

Cindy Wells

Jan 09, 2017 | Brother MFC-7420 Printer

1 Answer

How do I correct error h5 on a Sharp printer AR-5620N?


Hello Sudhir,
The error code H5 means there was at least 5 pages in a row where the paper did not come out of the printer correctly (most likely paper jams. The following manual will direct you on the steps needed to clear the code, please note especially page #8-3
Service Manual SHARP AR 5618 5620 5623 SME

The following video should help also;

Jan 09, 2017 | Sharp Office Equipment & Supplies

1 Answer

Hp laserjet m1522f error 5 turn off and on


Hi, Error 5 is a Scanner error. When turning the printer on, have the lid up so you can watch the scanner movement. Does it move smoothly? It should go through a warm up and you should be able to watch the scanner movement. If there is a problem with the scanner, there isn't a lot you could do except. The service manual says the scanner assembly should be replaced. If it was my printer, I would try to take a closer look at the scanner assembly and check to see if the scanner unit is bound up somewhere, or maybe a drop of 3 in 1 oil on the scanner rails. Let us know what happens.
thanks

Oct 02, 2013 | Office Equipment & Supplies

2 Answers

I can't figure out how to feed paper into the printer


hello

i assume you refer to ML591, dot matrix ?

go to this link, and download users guied and/or manual http://my.okidata.com/PP-ML591.nsf?opendatabase

how feed the paper http://my.okidata.com/PP-ML591.nsf?opendatabase

Jan 11, 2011 | Okidata 591 Printer

8 Answers

How can i download driver of samsung ml 1610 mono laser printer


How can i download driver of samsung ml 1610 mono laser printer

Nov 18, 2008 | Samsung ML 1610 Laser Printer

2 Answers

Okidata Microline 30 Turbo dot matrix


The problem your having is a spacer motor. It's located under the carriage that holds the ribbon/printhead. The part number is 56513701. Available at Seattle Platen - Dale 1800-221-2388.

Here's a free copy of the Okidata 320T service manual that will walk you through testing and verfying before ordering the replacement part.

If this helped you, please hit me up with a FIXYA. Thanks.

http://www.feedroller.com/Store/Service%20Manual/SER320T.PDF

Aug 30, 2008 | OKI MICROLINE 320 Turbo Matrix Printer

11 Answers

Printer driver for samsung 1610 printer


i want the driver of samsung printer model no.ml1610

Feb 11, 2008 | Samsung ML 1610 Laser Printer

2 Answers

Okidata Model# GE5253P


An online manual here: http://my.okidata.com/PP-ML320.nsf?opendatabase There is probably a top of form setting which needs to be checked & corrected. I assume you've checked tab/margin settings in your software & printer setup?

Sep 28, 2007 | Matrix Okidata Microline 320 Printer

Not finding what you are looking for?
Dataproducts 8524 Matrix Printer Logo

Related Topics:

651 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dataproducts Office Equipment & Supplies Experts

kakima

Level 3 Expert

100387 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

66632 Answers

Are you a Dataproducts Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...