Question about Computers & Internet

Hi,

a 6ya expert can help you resolve that issue over the phone in a minute or two.

best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).

click here to download the app (for users in the US for now) and get all the help you need.

goodluck!

Posted on Jan 02, 2017

The answer is 411.

9 x 3 = 27;

5 x 7 = 35;

8 x 6 = 48;

4 x 4 = 16;

then

7 x 2 = 14

Reverse all of the answers and you get:

72;

53;

48;

16;

and;

41

Finally, the 2nd number - 1 is the 3rd number in the total:

9 x 3 = 27, reverse it: 72; 3 - 1 = 2 ------ your answer is 722

5 x 7 = 35, reverse it: 53; 7 - 1 = 6 ------ your answer is 536

8 x 6 = 48, reverse it: 84; 6 - 1 = 5 ------ your answer is 845

4 x 4 = 16, reverse it: 61; 4 - 1 = 3 ------ your answer is 613

then

7 x 2 = 14, reverse it: 41; 2 - 1 = 1 ------ your answer is 411

Thanks for the challenge! Please rate me accordingly if i've helped you out.

Respectfully,

Don

9 x 3 = 27;

5 x 7 = 35;

8 x 6 = 48;

4 x 4 = 16;

then

7 x 2 = 14

Reverse all of the answers and you get:

72;

53;

48;

16;

and;

41

Finally, the 2nd number - 1 is the 3rd number in the total:

9 x 3 = 27, reverse it: 72; 3 - 1 = 2 ------ your answer is 722

5 x 7 = 35, reverse it: 53; 7 - 1 = 6 ------ your answer is 536

8 x 6 = 48, reverse it: 84; 6 - 1 = 5 ------ your answer is 845

4 x 4 = 16, reverse it: 61; 4 - 1 = 3 ------ your answer is 613

then

7 x 2 = 14, reverse it: 41; 2 - 1 = 1 ------ your answer is 411

Thanks for the challenge! Please rate me accordingly if i've helped you out.

Respectfully,

Don

Oct 29, 2010 | Puzzle Quest: Challenge Of The Warlords...

look on the unit tag just inside oven door (on most) and it will tell you kw or take input volts and multiply by total current draw and this will give you watts then divide by 1,000 for kw,your total draw in current will tell you what size breaker you need

Oct 07, 2009 | Kitchen Ranges

Your request is a little sketchy but here is a place to begin. Estimate how the total weight you want to raise. Purchase a rope rated for at least twice what you estimated. You will a need a frame and attach hardware capable of carrying twice the estimate too.

Now it gets fairly easy:

1. two single eye pulleys with 100 pounds tension pulled 1 foot will raise 100 pounds 1 foot.

2. two double eye pulleys (2 loops of rope) with 100 pounds of tension pulled 1 foot will raise 200 lbs 6 inches.

3. two triple eye pulleys (3 loops of rope) with 100 pounds of tension pulled 1 foot will raise 300 lbs 4 inches.

You should see the relationship.

Please for her safety don't exceed the rating of any of the materials.

I've invested time and research in this solution. Please invest some of your own and rate my answer. GL

Lou

Now it gets fairly easy:

1. two single eye pulleys with 100 pounds tension pulled 1 foot will raise 100 pounds 1 foot.

2. two double eye pulleys (2 loops of rope) with 100 pounds of tension pulled 1 foot will raise 200 lbs 6 inches.

3. two triple eye pulleys (3 loops of rope) with 100 pounds of tension pulled 1 foot will raise 300 lbs 4 inches.

You should see the relationship.

Please for her safety don't exceed the rating of any of the materials.

I've invested time and research in this solution. Please invest some of your own and rate my answer. GL

Lou

Aug 21, 2009 | Jet Equipment Chain Hoist 2TON 20 Ft Lift...

S3 series is better suited for small sealed enclosures.

The S4 should be close to what you're looking for

T/S for the S4 (use the last number in each line):

**
Model - Strike S4.10.VC2 S4.12.VC2 S4.15.VC2**

Nominal Impedance (Ohms) Dual 4 Dual 4 Dual 4

Voice Coil Diameter - (in.) 3 3 3

FS (Hz) 26.7 25.5 21.9

QTS 0.28 0.29 0.35

VAS (cu.ft.) 0.89 2.43 4.81

VAS (liter) 25.1 68.9 136.3

Xmax (in.) 0.64 0.64 0.64

Xmax (mm) 16 16 16

SPL (dB M/W) 85.2 85.7 87.6

Power Handling (RMS) 500 500 500

Power Handling (Max) 1500 1500 1500

Mounting Dia. (in.) 9-1/2 11-3/8 14-1/8

Mounting Dia. (mm) 241 289 359

Mounting Depth (in.) 5-1/2 6-1/16 7-1/8

Mounting Depth (mm) 139.7 154 181

Speaker Dis. (cu. ft.) 0.15 0.20 0.25

Speaker Dis. (liters) 4.3 5.7 7.1

Total Sealed Box Vol. (cu. ft.) 0.65 0.75 1.25

Total Sealed Box Vol. (liters) 18.4 21.2 35.4

Total Vented Box Vol. (cu. ft.) 1.75 3.0 3.25

Total Vented Box Vol. (liters) 49.6 84.9 92.0

Otherwise - call their customer service line @ (888) 881-8186

Thanks for using FixYa - A good rating for your FREE answer is appreciated.

The S4 should be close to what you're looking for

T/S for the S4 (use the last number in each line):

Voice Coil Diameter - (in.) 3 3 3

FS (Hz) 26.7 25.5 21.9

QTS 0.28 0.29 0.35

VAS (cu.ft.) 0.89 2.43 4.81

VAS (liter) 25.1 68.9 136.3

Xmax (in.) 0.64 0.64 0.64

Xmax (mm) 16 16 16

SPL (dB M/W) 85.2 85.7 87.6

Power Handling (RMS) 500 500 500

Power Handling (Max) 1500 1500 1500

Mounting Dia. (in.) 9-1/2 11-3/8 14-1/8

Mounting Dia. (mm) 241 289 359

Mounting Depth (in.) 5-1/2 6-1/16 7-1/8

Mounting Depth (mm) 139.7 154 181

Speaker Dis. (cu. ft.) 0.15 0.20 0.25

Speaker Dis. (liters) 4.3 5.7 7.1

Total Sealed Box Vol. (cu. ft.) 0.65 0.75 1.25

Total Sealed Box Vol. (liters) 18.4 21.2 35.4

Total Vented Box Vol. (cu. ft.) 1.75 3.0 3.25

Total Vented Box Vol. (liters) 49.6 84.9 92.0

Otherwise - call their customer service line @ (888) 881-8186

Thanks for using FixYa - A good rating for your FREE answer is appreciated.

Jul 04, 2009 | Rockford Fosgate Car Audio & Video

You should first enter the BIOS and make sure that the boot order has "IDE0" as first boot device, it sounds like it may currently be set to "removable drive"

Please rate FixYa Experts assistance, whether your rating is good or bad helps The experts immensely.

Thank you for taking the time.

Please rate FixYa Experts assistance, whether your rating is good or bad helps The experts immensely.

Thank you for taking the time.

May 25, 2009 | Maxtor Personal Storage 3200 (U01E200) 200...

1. Move the

May 15, 2009 | Sharp EL-1801P Calculator

I don't know how you are coming up with a total load of 1 ohm , but if you do manage to hook that amp to a 1 ohm load you will almost certainly blow that amp. Good luck and please don't forget to rate this answer.Thanks.

Apr 12, 2009 | Directed 1100d Car Audio Amplifier

You could assemble a simple Excel spreadsheet and then total, average, find the mean, standard deviation, trend or a host of other answers or information. You can lock the spreadsheet so no one can tamper with it or change the structure. That would be much easier than creating a special program unless there is a specific reason to do so.

Mar 21, 2009 | Microsoft Computers & Internet

First think how you would solve this problem yourself on a piece of
paper. Then try programming it using the things you learned (if they've
given you this assignment without teaching you to multiply, subtract
and use if's, drop the course).

Well here is an idea.

Take the total kilowattage and send it to a function. What the function will do is subtract 14KW from the total Kilowattage and add the amount for the first 14KW then subtract 85KW from the total KW and add the amount for the 85KW. But once you subtract the number of KW from the total make sure to check if the total KW isn't negative, if so just break out of the function and return the total due.

Or if you have formula for how much the rate grows over how many miles.

For example lets say the rate grows by $1 every time the KW doubles you could have something like

int rate = 1; //Begining rate

int KW = 14; //First flat rate

int amount; //total amount they have to pay

while(totalKW > 0)

{

totalKW -= KW; //subtract the first rate

if(totalKW <= 0) //check if too much subtracted

break; //if so break

amount += rate; //add the rate to the total

rate += 1; // Add $1 to the rate every time

KW *= 2; // KW is doubled

}

Well here is an idea.

Take the total kilowattage and send it to a function. What the function will do is subtract 14KW from the total Kilowattage and add the amount for the first 14KW then subtract 85KW from the total KW and add the amount for the 85KW. But once you subtract the number of KW from the total make sure to check if the total KW isn't negative, if so just break out of the function and return the total due.

Or if you have formula for how much the rate grows over how many miles.

For example lets say the rate grows by $1 every time the KW doubles you could have something like

int rate = 1; //Begining rate

int KW = 14; //First flat rate

int amount; //total amount they have to pay

while(totalKW > 0)

{

totalKW -= KW; //subtract the first rate

if(totalKW <= 0) //check if too much subtracted

break; //if so break

amount += rate; //add the rate to the total

rate += 1; // Add $1 to the rate every time

KW *= 2; // KW is doubled

}

Jan 05, 2009 | Computers & Internet

HI pat its easy to gain access . theres 2 screws at the bottom of the frontpanel. remove these screws pull front towards you . now you have access. thanks the appliance doc. please rate my answer.thanks

Oct 08, 2008 | Dryers

28 people viewed this question

Usually answered in minutes!

×