Question about Colubris Networks (CN3200) Integrated 802.11a, 802.11g/b

2 Answers

Iam not remembre the username and passworld i want username and passworld preicipal i have the same problem my colubris cn3200 WLAN Access Point/controller. im in a computer course and we where given it with no info and we need to reset it to be able to get it configured(reset secuence) stardard admin/admin mane and password does not work. if enybody knows enything about it thank you

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

To reset to factory you have to hold reset button until ALL THREE LIGHTS FLASH 3 TIMES!!! Then you can access it through web portal at 192.168.1.1 with admin/admin. (Make sure you set a static IP on your computer 192.168.1.2 and gateway 192.168.1.1 and use a crossover cable). After factory reset the power light should flash rapidly letting you know its in controlled mode. Once you log in you can switch it to autonomous mode.

Posted on Jul 20, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 366 Answers

Reset to factory default before to use admin/admin
check here standard settings for routers

Posted on Feb 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I am trying to hook up a new wireless printer, and I need to know a couple of issues. My motem is an Actiontec M1000 ssid is myquest3677 and I need to find the password, and the WLAN access point/router


Hi,

Welcome to FIxya. If you need you Security Key or Password (Network Key) on your router you need to access the Wireless Settings Page. To access the router page you need a working computer that is connected to the router. To access the router page just open a browser then type 192.168.0.1, the Default username is admin and the password is blank. Go to the Wireless Settings and you'll find the Network Key or Passphrase (Password). You can alsoThen Personalize you Network Key or Passphrase so that you can easily remember it. Then WLAN Access point is the Network Name or SSid which is myquest3677

Thanks for using Fixya.

Feb 25, 2011 | Computers & Internet

2 Answers

I need the software and drivers


Contact us for advanced configuration and tech support for these, we have 8 years experience with Colubris/HP and have installed, managed and operated over 2000 hotspots with this device.

I looked at www.diplodrivers.com and could not find currnet colubris / HP firmware...

Regards
Murray
http://wireless.deepcoolclear.com/

Dec 22, 2010 | HP ProCurve MSM313 WW (J9350A)

1 Answer

Wifi is not working while iam using in windows XP operating system


Hi Sivakumar133,

Some reasons why wifi stops working is due to corrupted driver or defective WLAN card. There are some ways on how to diagnose this problem, just reinstall the driver and configure it again with the wireless access point. You can download the WLAN driver for this particular system by visiting this link. You will notice that on the Networking Wireless LAN section it has 2 types of WLAN card, Broadcom and Intel. Just try to install the Broadcom driver because this is compatible with XP. If you're not sure what is the model of your WLAN just check it under device manager and look for Network adapter. After downloading, install the .exe file then restart the system. You can now configure again the computer to your router.

Hope it helps.

Thank you for using FixYa.

Oct 15, 2010 | Lenovo 3000 Y410 Laptop

1 Answer

Iam using blackberry curve 8900 and im able to access airtel gprs through opera mini...bt through main browser i am not able ao access it can n e 1 thr sort out ma prblm plzzzz.....


Hi, in BlackBerry Curve 8900, there're actually two browsers available, only if the BlackBerry Internet service is active.
One of the browser is meant for accessing via WLan. & the other for BIS-B service. + an additional Browser relative to the Network provider will also be available.

So check whether the WLan browser is not accessed.
Your BIS-B service might be active since you're getting the network connection in Opera mini.

Please check which browser is accessed & then try.

Regards
Vineeth K.

Aug 05, 2010 | Cell Phones

1 Answer

I need to limit access to my wlan router. How do I do it? I typed 192.168.1.1 in the address bar of the Internet Explorer and hit enter. I then typed admin in the username box and password in the password...


You could try "admin" as the username and "password1" as the password, or "admin" as the username and no password. If neither of those work, you might have to contact Linksys tech support.

Once you get into your router's settings, there are several things you can do to limit access to your router. The first thing is to change the default password. You can also change your network name (SSID), enable MAC filtering, or turn on WEP, WPA, or WPA2 security, depending on which options your router and computers support.

Jun 22, 2010 | Computers & Internet

1 Answer

I need to limit access to my linksys wlan. How do I do it?


Hi Friend,

Type 192.168.1.1 in the address bar of the Internet Explorer and hit enter. Do not type anything in username and type admin in password(only if you have not set the router password).

Now click Access Restrictions tab. Click Enable and restrict the acess according to your need.

Regards
Chiranjeet

Jun 14, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

Iam not remembre the username and passworld i want username and passworld preicipal


PW and User of What?
WLAN network. or Router?
Model?
do you get radio signal?
Do you see your Wlan?
Try my tip

Jan 09, 2009 | Computers & Internet

1 Answer

I need help with my router i like to put a passworld


If fresh out of the box or newly reset
connect power to the device and connect network cable from device to our computer.
open web browser and type http://192.168.1.245
username is null
password is admin

Here is manual

Nov 28, 2008 | Linksys Wireless-G WRT54GS Router...

1 Answer

Password Lost


press ctrl alt del twice all together then type administrator in username press enter. may work other wise pls check back

Apr 16, 2008 | Compaq NX6110 TFT XGA Notebook

Not finding what you are looking for?
Colubris Networks (CN3200) Integrated 802.11a, 802.11g/b Logo

Related Topics:

545 people viewed this question

Ask a Question

Usually answered in minutes!

Top Colubris Networks Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

100340 Answers

David Payne
David Payne

Level 3 Expert

14160 Answers

Are you a Colubris Networks Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...