Question about Tally T6218 Matrix Printer
If you haven't fixed? If you don't get Hammer Voltage 2 error immediately, then sounds like your blower underneath the ribbon deck which keeps the hammerbank kewl is not working... Be careful but you can get shelf or cart about printer height and remove the ribbon deck with ribbon & cables still connected from the print. Rotate and sit it on the shelf or a cart. Start printing and see if the black blower(in the middle with a little black air duct going to the hammerbank) is working.
One other thing their's qty 7 hammer coils per hammer bank, if you have replaced the 1st 2 reading from left to right with hammerbank installed in printer, then you have qty 5 more which 1 of the 5 left is causing Hammer Voltage 2.
Have any other ??? feel free to call at x311
Posted on May 12, 2009
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
May 04, 2011 | Tally T6218 Matrix Printer
Dec 31, 2010 | Tally T6218 Matrix Printer
Apr 20, 2010 | Tally T6218 Matrix Printer
Apr 05, 2010 | Tally T6218 Matrix Printer
Aug 25, 2009 | Tally T6218 Matrix Printer
Jan 08, 2009 | TallyGenicom 6312 Matrix Printer
May 07, 2008 | TallyGenicom 6306 Matrix Printer
280 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: