Question about Kenmore 24032\24036 Top Load Washer

1 Answer

I went to comment on a soultion and added to the soultion list by mistake, why can I not edit my own posts?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

That is not a feature at FixYa.

Please re-post.


Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Affinity 6000 es1 error code ad


Good Afternoon Friend,

I understand that your Frigidaire washer, model# ATF6000ES1, is displaying an "AD" code. The "AD" means that your appliance was in an automatic mode. I suggest resetting your appliance, by either unplugging it or shutting the power off at your home's circuit breaker, for 3-5 minutes. Restore power and start any cycle. I ask that you please follow up with a comment on the post, at your convenience, to advise if further troubleshooting is needed or if your appliances status has changed successfully. Hope this is helpful.

-Best Regards-
WP

Jul 05, 2014 | Frigidaire Affinity ATF7000E Front Load...

Tip

Hi JS, This is nothing to do with the overflowing problem, but its the only post...


This advice is for a washer that fills and will not shut off, resulting in an overflow. Or, water is leaking from the washer while filling. The symptoms can apply to either a TOP LOADER or FRONT LOADER washer. This may be able to save you from an expensive service call by making these simple visual checks.

Water Does Not Shut Off and Overflows: The water level in a washer is controlled by the Pressure Switch. The switch is usually cylindrical in shape and has an electrical connection and an air hose attached. In many cases, the small air hose comes loose from the Pressure Switch fitting and/or falls off. This air hose is required to detect the air pressure from the wash tub as tub fills. With no air pressure, the switch will not function and the result will be a wash tub that fills continuously to the point of overflowing. The same would be true, if the air hose has any cracks, splits or holes in it.

Water Leaking While Filling: The other end of this hose runs to the air dome fitting on the side of the wash tub. If the lower end of the hose comes off, the water will begin to spill onto the floor under the washer, but the tub will not fill.

What to Look For: Check for the obvious. Make sure the air hose is still attached to the pressure switch and air dome. Then, inspect the entire length of the hose, paying particular attention to areas where chaffing may occur and at the points where the hose connects to the pressure switch and air dome. Vibrations from the washer can cause some wear if the hose is rubbing against anything, and the ends of the hose can stretch over time and not seal properly.

On most top loaders the Pressure Switch is located inside the operator console behind the knob that controls the water level. This knob is commonly referred to as the “Load Level”, “Load Size” or “Water Level”. On front loader washers the pressure switch location is usually located in the back of the washer behind the wash tub, or along the interior cabinet wall adjacent to the wash tub.

How to Correct: If the hose has slipped off, cut about ½” off the end of the hose and reattach to the pressure switch and/or air dome fitting. Take a small zip tie and place it around the hose at the point where it connects to the fitting. DO NOT over tighten as this can damage the air hose fitting. Just make the zip tie snug enough to keep the air hose from sliding off. If the hose has any cracks or holes, you can attempt to seal them by using electrical tape. Replacement tubing can be purchased at any hardware store.

NOTE: This is not an all inclusive fix, as the Pressure Switch can fail in some cases and cause similar symptoms. This is merely a preliminary check for a common occurrence that I have discovered. It can give symptoms of a major problem, resulting in a call for a repairman, only to turn out to be a simple fix that any Do-It-Yourselfer should be able to check and correct themselves. I hope this information is found to be helpful and saves many of you a future service call.

on Aug 18, 2008 | Kenmore 24032\24036 Top Load Washer

1 Answer

I have lost instructions and I need to clean my machine after more than 100 washes


First of all, thank you very much for choosing FIXYA today for your technical support needs.

I'm Joe, and I will be more than happy to assist you with your service request.


In order to provide you with the precise instructions that you need, could you please provide the exact brand and model number of your washing machine. I will then be able to track down the exact documentation and instructions that you need.

Please COMMENT back here to this page with this additional information and I will respond as soon as I see it.

Be sure to use the small blue COMMENT button located just above or below the text of this solution to leave your comments and I will be notified right away. After I respond back, it may be necessary to push the COMMENTS button immediately under this solution text in order to see the complete list of our additional comments that are added on after this.


Thank you very much, I look forward to helping out just as soon as I hear back from you.


Joe.

Oct 14, 2011 | Washing Machines

1 Answer

Controls locked


Hi


Thanks for using FixYa. To unlock the controls you’ll need to press and hold the END OF CYCLE button for 10-15 seconds. Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Jul 31, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

By mistake I pressed the ControlLock button instead of the power button. I cannot get the control lock button to release and turn off now. How can I get the Control lock button to turn off?


Hi


Thanks for using FixYa. To unlock the controls you’ll need to press and hold the END OF CYCLE button for 10-15 seconds. Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Jul 21, 2010 | Maytag MAH6700AWW Neptune Front-Load...

1 Answer

I have a kenmore frontload smart wash quiet pak 9 anf the control locked light went on and locketd the whole machine. whow do I unlock it


Hi


Thanks for using FixYa. To unlock the washer press and hold the DRAIN/SPIN button for 10-15 seconds. Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

Jun 30, 2010 | Washing Machines

1 Answer

My machine wont fill up with water or wash the clothes. I made the mistake of filling up the washer with water and then adding the clothes. The agitator wouldn't spin. So, I went to spin to get the water...


Hi,
The machine is top loading means there you are suppose to check whether any wire cut in the unit or any loose connection of connector kindly press all the connectors properly otherwise if you found any display light is blinking means the main board of the machine is defective
check the connectors and wires if it is ok means kindly replace the mainboard

Dec 24, 2009 | Washing Machines

1 Answer

Error code f17


Sears are a department store not a manufacturer, they contract other manufacturers to build the appliances for them and these are then sold under the Sears/ Kenmore brand.
To find who made your appliance, check the first three digits of your model number against the list below and this will give you the manufacturer of your appliance.

There is a site to help identify you washers "real" maker
The Link is here to cross reference it.then look up f17 and f25 on that make and model for better results
http://www.appliancefactoryparts.com/applianceshvac/help-center/fault-codes/fault-codes-washer.html

the Sears/Kenmore part is almost in the middle of the page. Then keep me posted by adding comments if you have any other questions
I hope this helps you out
8-)

Jun 07, 2009 | Kenmore Elite 45986 Front Load Washer

1 Answer

Hi i was chatting with sunny16 and my connection went down


got you again.i have been waiting for your reply.this is what i posted in the last of our chat session.
"the manual does not lead to any safety fuse.So the control board might be damaged, or i guess should be replaced.the control board controls the display too.considering the other case with the door lock, it might be the interlock door mechanism which can be removed once the board is replaced and the machine starts to work,"
i guess you wont be charged for my chat session, but i feel its my duty to help you out as i started this.:).post your further comments here.will look forward to chat with you again.

Jan 11, 2009 | Washing Machines

Not finding what you are looking for?
Kenmore 24032\24036 Top Load Washer Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Fred Sops

Level 2 Expert

271 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...