I installed the Lanzar SD34MIP stereo in the car and tried using the DVD player to test it out and the screen just always says "you cannot use this funtion while driving" and I can not see the DVD image on the screen. How do I unlock this funtion?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Try going to the crutchfield website and look for help installing stereo. they can get you vehicle specific wiring codes for free. Also, almost everey stereo has common color codes for wiring. red- switched batt. +, yellow-constant batt. +, black= ground, blue- power anrenna, etc.
Hi if you go to a autoparts store such as auto zone they sell a universal plug for your vehicle you plug it in to the radio harness on dash and then match up the colors coming off the radio harness it comes with a diagram to help you.
Do you mean the ignition wire to turn the radio on/off with the key? It's usually red. Are you installing the radio using a stereo kit for that car? Stereo kits for their particular model and year are usually color coded for the wires in that car. If not, i recomend buying the harness kit. makes things soooo much easier. If you don't want to go that route just test the wires with a test light. turn on the key, then turn off til you get the right wire(like i said, it's usually red, the 12 volt constant is yellow, and of course your ground is black. good luck
Here is a link to the owner's manual:
(Note that the "DCP release button" is the upper-leftmost button on the unit.)
On page E-5, it says:
2.DETACHABLE CONTROL PANEL (D.C.P.)
Removing The Detachable Control Panel (D.C.P.).
1. Turn the power off
2. Press the D.C.P. release button
3. Remove the D.C.P.
Attaching the DCP
1. Attach the panel at the right side first, with
point B on the main unit touching point A on the
D.C.P. (As shown on the digram).
2. Then press the left side of D.C.P. onto the main
unit until a ?click? sound is heard.
DO NOT insert the D.C.P from the left side. Doing so may damage it.
The D.C.P can easily be damaged by shocks. After removing it, place it in a protective case and be careful not
to drop it or subject it to strong shocks.
When the release button is pressed and the D.C.P is unlocked, the car's vibrations may cause it to fall. To
prevent damage to the D.C.P, always store it in a protective case after detaching it.
The rear connector that connects the main unit and the D.C.P is an extremely important part. Be careful not to
damage it by pressing on it with fingernails, pens, screwdrivers, etc.
If the D.C.P is dirty, wipe off the dirt with soft,
dry cloth only. And use a cotton swab soaked
in isopropyl alcohol to clean the socket on the
Socket back of the D.C.P.