Question about Kenmore 24032\24036 Top Load Washer

1 Answer

Whirlpool imperial dryer/kenmore 70 series heavy duty washer

My dryer "alarm" continually goes off dur to my washer hose bursting and spraying water on the dryer and all about the basement. This is a gas dryer and I need to know how to relight the pilor or if it is an electronic ignition and if I must wait a certain time for the ignition module to dry itself?

My washer needs its hoses replaced. What is the diameter of the hoses I need to purchase?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

This is a pilot-less ignition. You should wait at LEAST 48 hours for the water to evaporate as much as possible.

Longer if possible.



Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Should I buy a new washer? I have a great Kenmore, Heavy Duty, 70 Series, model 110, serial number C83193200. Yes, it was made in 1983 and now leaks water from the bottom front onto the floor.


It could be a dry rot hose or the pump could be leaking might be an easy fix it depends whether you want to repair it or spend allot of money on a new dryer are u pretty handy i could assist you on how to fix it .

Nov 24, 2012 | Kenmore 3.2 cu. ft. Plus Top Load Washer

1 Answer

Kenmore heavy duty 70 series model 110-8237012


probably your drain pump leaking it has a seal right where it attaches to motor,,,,mine is leaking there but haven't replaced it yet! lol

Feb 27, 2010 | Kenmore Washing Machines

1 Answer

Kenmore Heavy Duty 70 Series Leaking in the back


If you bought a new washer and you still have a leak, i guess it was not the washer but where it drains into. Sink or stand pipe has a leak. unless you are useing the old drain hose from your old washer. Dry up everything and look for the sorse of water with a bright light when the washer drains .

Nov 22, 2009 | Washing Machines

2 Answers

I have an old Kenmore Heavy Duty 70 series washer.


its a filter inside the water hose thats still blocked or the relay inside the washer for the cold feed is not opening up fully it could just need a clean or maybe a new one fitted

Nov 05, 2009 | Kenmore 22422 Top Load Washer

1 Answer

Washer will not empyy water or spin or wash on any cycle


something caught in drain pump, clamp hoses and remove pump inspect repair or replace.

Apr 04, 2009 | Kenmore 22422 Top Load Washer

1 Answer

Slow cold water only fill kenmore heavy duty 70 902202


remove fill hoses and inspected for debris or cloggs ,,,,

Dec 30, 2008 | Kenmore 22422 Top Load Washer

1 Answer

Kenmore washer machine heavy duty 70 series


most likely a water pressure issue try adj shut off valve off slowly until noise stops if water flow not enough ckd fill screens in back of valve for sediment and trash

Apr 29, 2008 | Kenmore 22422 Top Load Washer

Not finding what you are looking for?
Kenmore 24032\24036 Top Load Washer Logo

402 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Fred Sops

Level 2 Expert

271 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...