Question about Konica Minolta magicolor 2300DL Laser Printer

1 Answer

My Konica 2300DL is showing an error that reads AIDC Error and I cannot print anything

Posted by on

  • draskew1005 Feb 10, 2009

    I did clean the laser lens cover; however, I could not find the AIDC calibration cycle on P 81-82 in the manual I found online. I did restart the machine and unfortunately, I have the same AIDC error.


  • draskew1005 Feb 10, 2009

    This all started when I had a label come off a page of labels I was printing. I still have not found the label and I have practically disassembled the machine! I don't know where that little ****** went.... Afterwards, I printed a page and there was a smear on the page, the next page I was going to print, the AIDC sensor light came on and it hasn't worked since! When I turn power on, it will go through the cycles then say AIDC sensor error and it stops.




1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 191 Answers

You may try bellow for your print trouble
1) clean laser lens cover using soft cloth,
2) perform an AIDC calibration cycle through the manu--- Engin/service/power on/test
reference user guide P81-82

Posted on Feb 10, 2009

  • 2 more comments 
  • Frank Zhang
    Frank Zhang Feb 10, 2009

    any help for you please feedback thanks

  • Frank Zhang
    Frank Zhang Feb 10, 2009

    an AIDC calibration cycle through the Engine/Service/Power On Test menu which on printer panel, waiting until the test is finished and IDLE/MAGICOLOR 2300DL is displayed

    any help for you please send a feedback thanks

  • Frank Zhang
    Frank Zhang Feb 10, 2009

    one more check: is there any paper jam at tray 2 that could infect AIDC sensor working normally

  • Frank Zhang
    Frank Zhang Feb 10, 2009

    you need find the lable missing:

    1) check all paper road specially around AIDC sensor area carefully check.see service menual P38-39 AIDC sensor location

    ,P44-45 AIDC works logical tech. hope you can fix it



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Cannot Print

we need to coordinate this with konica service center, i already encountered that kind of problem and we replace ip board controller.

Apr 08, 2010 | Konica Minolta magicolor 2300DL Laser...

1 Answer

Our 2300DL is leaving streaks when printing

Out of one or more toners. If you have removed and replaced a cartridge in error the % remaining is reset to 100%. Try to determine which color is missing in your print out (usually black), and then follow menu instructions to replace that cartridge. The ends are color coded so be sure you change the correct one. This will insure the remaining cartridges % remaining is correct.

Jan 13, 2010 | Konica Minolta magicolor 2300DL Laser...

1 Answer

My magicolor 2300dl printer is showing waster toner box full and won't print but the waste toner box is empty and new. Is there a reset button on the printer to bypass this error?

1. Empty the waste box.

2. Read p66 of

3. Identify the "Waste Toner Full Detecting Sensor" which tries to pass a light beam through the protruding plastic slot on the waste box that engages with the photocell.

4. Use a dry cloth to clean dust off the photocell transmitter and receiver and also off the protruding plastic slot, so that light will now pass through.

5. Refit the waste box and enjoy the $$ saving.

Sep 23, 2009 | Konica Minolta magicolor 2300DL Laser...

1 Answer

AIDC error code

When an “AIDC Error” occurs, do this:
1. Replace the Image Transfer Belt
2. Check to see if the AIDC Sensor is dirty
3. Securely connect the connectors to the High Voltage Unit
4. Replace PWB-A

Aug 05, 2009 | Konica Minolta magicolor 5430 DL Laser...

1 Answer

Installed vista 32 driver for networked 2300dl but can't print

Operations could not be completed; the print spooler service is not running.

May 08, 2009 | Konica Minolta magicolor 2300DL Laser...

1 Answer

Fatal Error 21H

FATAL ERROR CODE 21H / SERVICE CALL 21 TRANS DET SENS: Malfunction of the OHP detecting sensor

check the OHP detecting sensor (PC3A) (it's at the front above the waste toner sensor pc6)

May 22, 2008 | Konica Minolta magicolor 2300DL Laser...

1 Answer

Konica/Minolta majicolor 2300DL printer

pleas check the driver settings, maybe there is a setting fit to paper or something.

May 07, 2008 | Konica Minolta magicolor 2300DL Laser...

1 Answer

MagiColor 2300DL Printing Wtih Vista over Wireless Network

I am using Vista 64 and a 2300DL in the same manner as abertola003. I downloaded the Latest driver from Konica Website and everything is working well.
the driver is named Konica-Minolta 2300DL (unidrv)

Apr 01, 2008 | Konica Minolta magicolor 2300DL Laser...

1 Answer

Error light and no printing

What does the status monitor message say? The red light is the most general error. It's bit like taking a 747 back to Boeing and saying there is something wrong with it.

If you do not have the status monitor installed, download it from Konica Minolta and run it. Once the status monitor is running it will read the error from the printer.

Sep 05, 2007 | Konica Minolta magicolor 2300DL Laser...

Not finding what you are looking for?
Konica Minolta magicolor 2300DL Laser Printer Logo

Related Topics:

283 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6674 Answers

Adorjani Laszlo

Level 3 Expert

1297 Answers


Level 2 Expert

108 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides