Question about PC Desktops

3 Answers

I have an emachine KB-0108 keyboard and the power keys are not working since I had my harddrive in for repairs. The typing keys work but none of the "extra" keys.

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Do you know where I can get an operating manual for this keyboard?

Posted on Dec 04, 2011

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 153 Answers

Here's the link from driverguide for the driver. You may need to create a free account.

http://members.driverguide.com/driver/detail.php?driverid=162597&si=0bb4348902488e9676da6f198156e07c

Posted on Feb 01, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 596 Answers

Have you tried to reinstall the drivers from the recovery apps? If you go into the recovery process, it gives you the options to recovery the whole system or just the apps. Choose the apps and this should correct your problem. (If you can not recover the apps without recoverying the whole system, go to eMachine support page for driver download.)

Posted on Feb 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On an Emachines keyboard Model KB-0108, version CV, I cannot get the @ symbol toshow. Instad, I get an * symbol?


have you try shift and the number 2,some times that works..if not go into your control panel and goto your keyboard icon and see if you can reset from there.

Apr 27, 2014 | E-Machines eMachines Desktop PC

1 Answer

3 short 1 long 2 short led error blink code on emachine intel board d101ggc


Verify that the keyboard is connected properly to the computer by turning off your computer and then disconnecting and reconnecting the keyboard to the computer. Stuck key Ensure that there are no stuck keys on the keyboard. If all keys appear to be ok and you have a standard desktop computer with keyboard, turn the keyboard over and gently hit the back of the keyboard to loosen any dirt or hair that may be stuck in the keyboard. Bad keyboard Try another keyboard on the computer to verify that the keyboard has not gone bad. Bad PS/2 or AT port If all of the above solutions are not able to resolve your issue it is likely that the port on the back of the computer may be bad and the motherboard or I/O board may need to be replaced. WARNING: Before you start troubleshooting remember that you are dealing with electricity that can KILL. http://www.kitchentablecomputers.com/static.php - rules make sure that your RAM modules and Cmos battery are securely seated on some motherboards Cmos batteries are soldered in Test all power and data leads that attach from motherboard to your hard drive IDE SATA make sure they have a secure dust free connections and are not faulty or just replace them they could be faulty if its a flat 40 pin ide it will be the first to fail Check the graphics card is seated properly with no dust in the socket you might have to remove it to check for dust reinstall it Restart your computer the found new hardware wizard should activate a computer needs power and data to travel through every working device and to its continue its cycle and to have and end to function.

Feb 17, 2013 | E-Machines eMachines Desktop PC

2 Answers

Keyboard stopped working


http://www.ascendtech.us/emachines-kb-0705-ps-2-keyboard-black_i_kbdemkb0705bps2.aspx

Things I see here.
1) The second Keyboard you plugged wasn't any good either.

2) The PS/2 port for your keyboard on your motherboard, isn't any good anymore.
Computer off, plug it into the Mouse PS/2 port, and use a USB mouse.
BIOS will reset the I/O address for that PS/2 port, and set it for the Keyboard, when the computer is turned back on.

You may have to;
A) Turn the computer off
B) Unplug from power.

C) Press the Power On button in, and hold it in for a count of 10 seconds. Let go of the Power On button. Do this same procedure two more times.

What you are doing is draining residual power, clearing CMOS Error Codes, and resetting BIOS back to the factory default settings.

Keyboard plugged in, USB mouse plugged in, plug the computer back into power. WAIT 1 minute, turn the computer on.

Still no?
Motherboard replacement.

You didn't unplug the old Keyboard, WITH the computer on, and plug the new Keyboard in, did you? It isn't a hot-swap device. The computer must be off when unplugging a mouse, or keyboard.

For additional questions please post in a Comment.
Regards,
joecoolvette

May 28, 2012 | PC Desktops

1 Answer

Emachine driver kb-0108


Your keyboard manufacturer is actually Chicony. Try with this driver.Good Luck!

Oct 10, 2011 | E-Machines eMachines Desktop PC

2 Answers

I have a problem with my computer emachines j4501 desktop pc windows vista home premium..after the windows logo the monitor turn blank...but the cpu is still on.... what will i do...


If you can see the windows logo screen both your computer and monitor is working, possible problem could be that the display settings are set to high that your monitor is unable to handle it. Restart computer and keep tapping F8 key. This will take you to the advanced options menu In the list of options here choose enable low resolution mode and hit enter (you can only use your keyboard to choose - use the up / down arrow key) once you enter windows low res mode change it to 800 X 600 and restart the computer Once you are in the right mode now change the display settings accordingly.

Mar 12, 2011 | E-Machines eMachines Desktop PC

1 Answer

Installing hardare


What is the issue?
Turn the machine off - [ if it is on]
remove the old keyboard
plug the new keyboard in
Start the machine
insert the CD if one comes with it -
follow prompts

enjoy

Feb 01, 2010 | E-Machines eMachines Desktop PC

1 Answer

Keyboard buttons


go to the emachines website and download the necessary software/driver for the keyboard.

Mar 15, 2009 | E-Machines eMachines Desktop PC

3 Answers

Keyboard doesnt work on my repaired emachine with win xp


Could be a couple of things.

First, try connecting another keyboard using the same type of connection as your keyboard. (PS2, or USB). If that one works in the machine; then it's more then likely that there is a problem with your keyboard.

If it doesn't work, it may be a problem with the system itself or possibly a software problem. To test a keyboard is very simple and this test is integrated in most of the BIOS startup systems today. Simply press more than 7 keys right when you turn your power on to the system. If it beeps after a few seconds of holding or brings up a keyboard error, then the keyboard is communicating with the system. If there's a keyboard error that actually states that there is no keyboard present; then there is a problem.

I hope this helps you narrow it down. If it's not the keyboard itself, and you can't get any keyboards to work, I'd have that shop take another look at what they did.

Sep 29, 2008 | E-Machines eMachines Desktop PC

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

548 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...