Question about Nu Mark Numark Dxm06 DJ Mixer With 12 Effects System

1 Answer

Numark Mixer Headphone cue broken. Repair or replacement??

Could you tell me whether it is possible to replace the headphone channel toggle on a Numark DXM 06 Mixer. I.e. the sliding switch to listen to either channel in the headphones. This has recently broken such that the switch only outputs 1 of the channels into the headphones.

I would like to get this replaced or repaired if possible??

Thanks,

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My outputs dont have signal

Posted on Jul 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I connect a droid to my voco pro gig man?


You need at least one adapter. Buy a 3.5mm male headphone to STEREO RCA adapter. Make sure to buy one with 2 channels (red and white) for stereo.

Plug a digital/analog 3.5mm male headphone jack adapter into the droid. Plug the RCA (red and white) into the mixer. Good luck!

Jun 06, 2011 | Vocopro Kj7000pro 19" 6 Channel Karaoke...

1 Answer

My right channel upfader on my numark mixer is not working can this be fixed?


Yes take it to your local numark dealer and they will send it out or fix it right there. sounds like the faders blown.

Mar 15, 2011 | Nu Mark Numark Dxm06 DJ Mixer With 12...

1 Answer

The headphone jack broke. It is kind of pushed into the mixer. Is this repairable?


I repaired mine when that happened.... you have you unscrew all the screws on the top plare there is like 5 or 6 silver ones..Remove faders (2 volume 1 headphone) then remove the top plate. Then unscrew the the black screws on the side and front of the mixer... NOW THIS PART IS IMPORTANT..from the corners of the mixer there will be a little lifts carefully lift the top of the mixer up JUST A LITTLE BIT... have someone hold it or just rest it diagonally so you can unscrew the jack from the back MIC unless you were able to salvage the jack from the headphone if that silver and black piece are gone your going to have to borrow it from the mic... dont worry the mic will still be functional because its better set in that the headphone jack... now use the outside piece and bring the headphone component to the front where its suppose to be so you can screw the 2 back together.. then put every back together in a reverse order and you should be fine.... if you have anymore questions email me at DjAnthem222@yahoo.com

Sep 18, 2010 | Nu Mark Numark Dxm06 DJ Mixer With 12...

1 Answer

Headphone cue buttons on dnx 1500 not working and fx button they work but stick on or are hard to turn off


pulled the cover plate off cleaned switches with freeon put back 2getha all sweet but 4 how long i don't know thanks any way DAN

Dec 29, 2009 | Denon Dn-X1500 Professional DJ Mixer...

2 Answers

What is the best way to link a computer playing mp3 backing tracks to a powered mixer - or is it better to use an actual mp3 player or ipod


The way I used are with an adaptor,in one side are a 3.5mm terminal and in the other RCA you connect the cable to the headphones output on the cpu to the amplifier directly

Jul 27, 2009 | Fender 4 Channel Powered Mixer with 10 in...

1 Answer

The headphone jacks on my mixer(Vestax PMC-06 Pro A)not working


did you try the headphone jack in the back? also is the cue fader crackling when you move it left and right? also check if the cue fader is plugged in. if none of the above, check with your warranty

Apr 14, 2009 | Vestax Pmc06proa Thin DJ Scratch Mixer...

1 Answer

Numark cue mixing


to change headphone track, use the cue slider which is located on the right of the control panel above the right chanel treble control and below the cue gain control. chanel 1 or 2 can be selected or in the middle for a mix of both tracks just like the cross fader.

Feb 24, 2009 | Nu Mark Numark Dxm06 DJ Mixer With 12...

1 Answer

Headphone jack on pioneer djm-600 fallen through!


If it's fallen inside then either it's fixing nut has become unscrewed or the thread on the socket has collapsed, see here for a replacement :-
http://stores.ebay.co.uk/methleykev

http://www.technicsdjuk.com/

Jan 12, 2009 | Pioneer DJm600 DJ Mixer W/Sampler Black...

1 Answer

Vestax pmc 06 mixer / Virtual DJ Mix station


you need a sound card with headphone out seperate from master out

Oct 19, 2008 | Vestax Pmc06proa Thin DJ Scratch Mixer...

Not finding what you are looking for?
Nu Mark Numark Dxm06 DJ Mixer With 12 Effects System Logo

Related Topics:

602 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nu Mark Home Theater Systems Experts

Lawrence Oravetz

Level 3 Expert

7686 Answers

Audio Service Clinic...

Level 3 Expert

924 Answers

Are you a Nu Mark Home Theater System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...