Question about Hotpoint Aquarius WD640 Front Load Washer/Dryer

1 Answer

Wd865 error f01

Error message f-01

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 100 Answers

F01 is a motor problem. may need a new one but an engineer visit would confirm this.

Posted on Feb 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is cause of F 01 error?


The "F01" error code is indicating a communication error between the Central Control Unit (CCU) and the EEPROM on board the CCU occurred. and the electronic board needs to be replace

Dec 26, 2015 | Washing Machines

1 Answer

110.4753 error code f01


I found this on the WEB-In reference to your Kenmore HE washer, model number 110.4753:

F-01 Error code

:

EEPROM ERROR

,

PUMP DRIVE ERROR

, or a

MAIN RELAY ERROR

EEPROM ERROR

: A communication error between the

Central Control Unit

(CCU) and the

EEPROM

onboard the

CCU

occurred.

PUMP DRIVE ERROR

: The pump driver fails to operate

MAIN RELAY ERROR

: One of the main relays is not working properly

Mar 31, 2014 | Kenmore HE2 Plus Front Load Washer

1 Answer

Duet dryer is giving me a F01 error message


f 01 is control systemand board fault cheaper to replace

Aug 17, 2012 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Error message f01


F-01 Motor triac short circuit this means that there is something wrong with the main board. but there is a thing to try 1st try unplugging the machine for 5 mins and plugging it back in and switch it on and try again. if it still dose not work after some attempts then it looks like you need to get the engineer out to fix it, hope this helps.

Nov 01, 2010 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

Error message F-01 & flashing lights etc I have a Hotpoint aquarius, WMF740. Suddenly returning to the kitchen I noticed an error message - the machine was switched off - which says F-01 and flashes...


Error code F01 indicates a short circuit motor triac.
You need to check connections on the motor, the motor plug and the module.
Having said that, you really should ring the manufacture, as the washer is still obviously under guarantee, and should be fixed at no cost to you.
The point to bear in mind is that if you do anything to it yourself, then in theory, you could invalidate the guarantee.
So, unless it is anything obvious, then I would advise you ring the manufacturer.
Hope this is of assistance to you.
Please rate my solution.
Thankyou.

Dec 21, 2009 | Hotpoint Washing Machines

1 Answer

F-01 error hotpoint WMD960P


Error code F01 is indicating ashort circuit motor triac.
Check connections on motor the motor plug and then control module.
Please rate my solution.
Thanks.

Nov 17, 2009 | Hotpoint Washing Machines

1 Answer

Error: F 01 and it wont start! I unplugged it for 2 minutes but it still reads 01. I drained the water and it still reads F 01


F01 - There may be an internal problem with the control, attempt a Hard Reset.

Hard Reset - In some cases the control can be non-functioning or may not accept activation from the control panel. To clear and restart the control follow the these steps:

* Unplug or turn the circuit breaker off for 30 seconds.
* Reconnect the unit to the power source by turning the breaker back on or plugging the unit back into the wall outlet.
* Press the Pause/Cancel/Stop button twice to clear the "PF" in the display.
* Start a short cycle to check the operation of the machine by selecting a cycle and pressing and holding the start button until the machine starts.

The F01 generally indicates a failed electronic machine control board.
This error code can sometimes be caused by a glitch or power surge through the electrical lines.
You may be able to clear this code by unplugging the washer for 5 minutes.
If the code returns after plugging the washer back in, then the electronic machine control board will need to be replaced.

The procedure for accessing and replacing this control board is shown in this image...

http://media.fotki.com/1_p,wkwdftgtbkdgfrwxgtqsskgwtqkq,vi/ksrttqdqrxkssrqtgsd/1/1303472/5961857/image12917img-or.jpg

Be sure to unplug the washer before accessing internal components.
When you access the control board, I recommend transferring the wires from the old control board to the new replacement control board one connection at a time.
Once you have all of the wires transferred, remove the old control board and mount the new control board in the washer.
Reassemble and test the washer.

The "F01" error code indicates a communication error between the Central Control Unit (CCU) and the EEPROM onboard the CCU.
The "F01" can also be displayed if the onboard "Pump Driver" fails to activate.
Generally in order to correct this failure will require replacing the CCU.
There is no way to test and verify if the control board has failed.
The technical data sheet basically states to replace the CCU.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

May 04, 2009 | Kenmore HE2 Plus Front Load Washer

1 Answer

Hotpoint washer/dryer aqaurius stopd mid cycle with message F-01


f01 is a motor short circuit. you will probably need a new one and maybe the circuit board that powers it if all the lights went out unless the fuse is gone.

Jan 28, 2009 | Hotpoint Aquarius WD63 Front Load...

1 Answer

Error message f-01 on hotpoint ultima wt741 washing machine


F01 is a motor faulty normally caused by the module,but sometimes thewiring to the motor plug that works loose as its to tight,give them alla good wiggle make sure there all in!
check this link for other error codes of hotpoint machines
http://www.hotpointservice.co.uk/hs/pages/content.do?keys=FAQ:ERROR_CODES

Dec 15, 2008 | Hotpoint Ultima WD72 Front Load...

1 Answer

Error code f-01


F01 is not a listederroe code in tech sheet, but almost always( regardlees of appliances or manufacture) relates to bad main power board, in this case hte CCU( central command unit)8182695 retails for about 175. adn is located under the main top assy

Mar 09, 2008 | Whirlpool Duet GHW9150P Front Load Washer

Not finding what you are looking for?
Hotpoint Aquarius WD640 Front Load Washer/Dryer Logo

224 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

hungoverrr

Level 1 Expert

5 Answers

puggy666

Level 1 Expert

47 Answers

gbob59

Level 3 Expert

2963 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...