Question about Intel Motherboard

1 Answer

I received the manual but it does not show where the vables go.In

Can you help me with this wire problem?

Posted by on

  • riverboi Feb 02, 2009

    In reference to the email you sent me there are cables coming from the front of the case not the power pack.

    These cables have names on the like r-1 reset,reset sw,etc.

    When you pull out the mother board there are approx.10 pins now which cable goes where this is my point.

    The literaature you sent and i thank you for that does not show the wiring and where i need to pluig them i n.

    Any questions pleae don't hesitate to ask.





  • Thomas F. Schneider May 11, 2010

    What cables? Almost everything on the power supply fits only one way. The IDE hard drive cable usualy fits in the blue or slot close to the center or the CPU. We need far more clarification to undestand your question. 
       The Wiring from the Case would have been shown on the mother moboard litature.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,692 Answers

OK I downloaded it myself,so follow these directions, please:    . Go to the link below. Once there download the guide. Once downloaded, open it w/o disconncting from the download website. Go to the index and click on the Install and replace internal header. Once you are there, go to:                                      Page 41, Figure 21, item C.
I am almost certain that is what you need.   

http://www.intel.com/support/motherboards/desktop/sb/cs-020725.htm

Posted on Feb 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The screen on my toughbook(cf31) is not working


Replace the screen or video vable . Prior to this make sure to plug your laptop to external monitor - to see if you have picture there .

Sep 04, 2016 | Computers & Internet

1 Answer

I have model kdc-138 & it show "ocer" on the screen & nothing works-radio or cd player...help???


Please check this message. If it is DCER, not OCER, you have a short-circuit in the speaker wiring or a wire is touching the vehicle chassis. Until the wire is fixed (insulated or replaced), the receiver will remain in the Protection mode. This keeps the short from permanently damaging the unit. After you insulate all of the wires, press the RESET button, to the left of and below the volume knob.

If the error persists, then you need to have the receiver professionally serviced. The short is probably inside the receiver itself.

I hope this helps. The troubleshooting guide is on page 18 of the manual. It is available from Kenwood here: http://manual.kenwood.com/files/B64-3898-00_00_KW.pdf . The image of the reset button position is on page 3.

Cindy Wells

Sep 17, 2015 | Kenwood Car Audio & Video

1 Answer

Diagram of pioneer receiver vsx-454 to show wire hookups


This site has the manual for downloading. You need to register but it's free.

Feb 28, 2010 | Pioneer VSX-454 Receiver

1 Answer

Need wireing diegram


Here's the Installation Manual.
181 Pages in 5 Languages....

http://docs.pioneer.eu/Manuals/AVIC_X1_CRD3836_installation_manual/GetPDF.ashx

and/or here's the page where all of the AVIC-X1 Manuals can be found, including the above installation manual...

http://www.pioneer.eu/eur/support/manuals/AVIC-X1/index.html


-----
It appears that the speaker wiring diagram, by colors at least, shows up on Page 9
But there's a lot of wiring to that thing and this manual has lots of pages showing all sorts of wiring.
I hope that works out for you.

Feb 07, 2010 | Pioneer GPS AVIC-X1 car radio

1 Answer

My receiver (SA-HE70) shows overload on the display, I know that someone probably shorted the speaker wires. How can I fix this or get a service manual for it?


Diusconnect all the speaker wires. Still overloaded? Y= take it in for service. N= isolate which speaker path is causing the problem.

Dec 11, 2009 | Panasonic SA-HE70 Receiver

1 Answer

Three obd lights stay on after new batterie during smog test


disnnect positive vable fro 1 minute ti reset ob c BS then reconnect

Aug 23, 2009 | 2000 Suzuki Grand Vitara

1 Answer

Tomtom one automatically shuts down after a certain amount of time when connected to computer. i am using a mac and trying to install maps. but keeps shutting off in the middle. but always shuts off...


I am not sure about the mac side but do not do it via a hub do it direct to a USB 2,0 compliant port.

And only use the vable that came with it not just one that fits.
not all cables are equal
Should be i know but its not always the case

If the mac has any power saving options esp for individual bits of hardware (lots of hardware have their own power saving functions) then turn them off windows allows pc users this option.

Aug 22, 2009 | Tomtom ONE 130 GPS Receiver

1 Answer

MySony str-da5000es is showing error code 11 and shut off by itself after few seconds.check and disconnect all speakers, unplugged power from wall and still showing error 11. am missing something in here...


error code 11 (protector) - According to the manual, 11/PROTECTOR means, "Irregular current is output from the speakers. Turn of the receiver, check the speaker connection and turn on the power again." Most likely, a strand of speaker wire is shorted to the chassis at one of the speaker terminals.
Hope this helps !

Jun 17, 2009 | Sony STR-DA5000ES Receiver

1 Answer

AVR-589 Denon Receiver Keeps Shutting Off


even if the wires are not touching they can still arch. make sure there is no bare wire showing ie. cannot see any unshielde speaker wires. id unplug then replug back in

May 18, 2009 | Denon AVR-3805 Receiver

1 Answer

Yamaha htr5230 hookup


Hi, Your receiver is really the same as my HTR 5240. Same back and front. basically. Go to Retrevo for manual. Shows all the hook ups. I have VCR , DVD, Tape Deck, hooked to mine but can't find the adapter so i can hook up my indoor fm antenna. All my components plug to back of receiver then there is one RCA wire running from receiver to Tv.

Sep 01, 2008 | Yamaha HTR-5230 Receiver

Not finding what you are looking for?
Intel Motherboard Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intel Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Tony

Level 3 Expert

2599 Answers

David
David

Level 3 Expert

778 Answers

Are you an Intel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...