Question about Canon PIXMA MP150 All-In-One InkJet Printer

2 Answers

Current Problem on Printer """E5"""

MY Canon MP145 printer had a fat a'hole problem when i tried to photostat my office work. I followed the previous instructions from the last user i looked it up...

1) With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button.
2) When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)note: press 4 times for waste ink counter reset.

The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off

1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset

5) Unplug cable power. (for MP145 / MP150)
6) Turn Off Power. (for MP160)

Error Code :
E2-2 = No paper (ASF)
E3-3 = Paper jam
E4 = No ink
E5-5 = The ink cartridges are not installed or a non-supported ink cartridge is installed, or the ink cartridges are not installed properly
E8 = Waste ink absorber full, or platen waste ink absorber full
E9 = The connected digital camera / video camera does not support Camera Direct Printing
E14 = The Ink cartridges whose destination are wrong
E15 = Ink cartridge is not installed E16 - Ink remaining is unknown
E16 -E19 = Failed to scan head alignment sheet
E22 = Carriage error
E23 = Paper feed error
E24 = Purge unit error
E25 = ASF(cam) sensor error
E26 = Internal temperature rise error
E27 = Waste ink absorber full or platen waste ink absorber full
E28 = Ink cartridge temperature rise error -
E29 = EEPROM error
E33 = Paper feed position error
E35 15 = USB Host VBUD overcurrent error - USB
E37 17 = Abnormal motor driver error
E40 20 = Other hardware error
E42 22 = Scanner error

but somehow it doesn't seem to work...
please help me solve this problem A.S.A.P.

thank you

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,041 Answers

This error means waste ink counter is full.

Solution:
1. Start with printer OFF
2. Hold down RESUME and then hold down POWER
3. Release RESUME
4. press RESUME twice, then release POWER
5. let green light blink until printhead has finished moving.
6. Press resume

Posted on Jan 25, 2010

  • daruff123 Sep 02, 2011

    There is no resume button on a MP150, you copied this off the net and I saw this article it is for another cannon printer and it does not work on this model you big dummy.

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

This works on MP460
http://forums.majorgeeks.com/showthread.php?t=164622

Posted on Jun 13, 2010

2 Suggested Answers

  • 284 Answers

SOURCE: canon printer pixma mp150 error codes E5 and E8

Insert with original cartridges will solve out your problem

Posted on May 28, 2010

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Dell 3115cn printer will not connect to the network (it still works on USB cable), hard to believe it's broken, so can the printer system be reset?


Try turning off the printer and disconnecting power plug from wall. Hold power on button for about a minute. Then replug unit and turn power on - it should then attempt to hook up to your existing network.

If no go, try reinstalling the software that initially came with printer and was used to set up the network

Jan 10, 2017 | Dell Office Equipment & Supplies

1 Answer

My Canon PIXMA MX700 is not turning on! I have checked all the cords even moved from one outlet to another and its still not turning on. Should I just purchase an new one this model is an old on


Do you have a CD to install this printer? if you do go into MY COMPUTER where you can erase things and erase the printer and its system then shut computer off and restart then reinstall the printer using your CD to reinstall it. Some times you have to delete things and reinstall them to work.

Jan 09, 2017 | Canon Office Equipment & Supplies

1 Answer

How do I connect two computers to my Canon MX3520 printer?


in the control panel where you see add a printer, you have to add the printer to each computer then click on the share printer box

Jan 09, 2017 | Canon Office Equipment & Supplies

2 Answers

How to download samsung ML-1666 printer driver for windows 7 32 bit


Dear
In windows-7 , the printer automatically down load from samsung website, if the PC detects the printer(try the usb cable conneting from the back panel of the PC). Also you may download from samsung website. Printer Support SAMSUNG India Printer Support SAMSUNG India Printer Support SAMSUNG India

Put your model code on search pocket and click .
Thanks.

Feb 17, 2015 | Samsung Office Equipment & Supplies

1 Answer

Canon mg6150 printer too much pink in photo's when printed


Please calibrate the printer using Canon software.

Mar 08, 2014 | Office Equipment & Supplies

1 Answer

How to clean ink absorber for canon mp237


First of all open the ink cartridge of your printer.
When the ink cartridge would move all the way over, then disconnect the power cord of your printer.
Now pull the frame of rubber from the printer and remove ink pads.
To clean ink pads you may place them in a bowl having warm water and start rubbing and squeezing them to clean it from ink.
After removal of ink, keep the pads separate for dry.
When the pads get dry completely, place them back in rubber frame.
Reinstall the rubber frame in your printer.
For deep guide and support refer to-
Canon Pixma Mp237 Manual

Oct 07, 2013 | Canon PIXMA MP230 Multifunction color...

1 Answer

Why does canon MP258 printer with scanner can't scan japanese yen paper bill amount 10,000. I tried it over 10 times but it stops,. And when i tried US paper bill, it works well. I need some explanation...


When you scan with any scanner it utilised the software with "Optical Character Recognition functions, usually abbreviated to OCR -> OCR is a field of research in pattern recognition, artificial intelligence and computer vision." to scan and record the scanned object, sometimes it does not or cannot recognise certain symbols or characters because of man made software & hardware have its limitations too.

Hope it helps.

Nov 12, 2010 | Office Equipment & Supplies

Not finding what you are looking for?
Canon PIXMA MP150 All-In-One InkJet Printer Logo

7,152 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

100140 Answers

old marine
old marine

Level 3 Expert

1660 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...