Question about Zebra P330i Thermal Card Printer

2 Answers

Clean prinnter massage

Hy, we used zebra p330i ID Card Printer. Resent we change the printer head and after change the head printer display showing the massage ( CLEAN PRINTER ) How we can sholve the printer problem.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

  • Zebra Expert
  • 285 Answers

Nee to have a clean card to put on the cards feeder and a long card to feed were the cards coming out, in sequence, the printer tell you the correct sequence.

Posted on Nov 13, 2010

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Contributor
  • 62 Answers

The Zebra printer displays the Clean Printer message when the printer prints a 1000 cards.

This is to maintain printer and ensure good print quality.

The way to clear the message is to get cleaning cards and run a cleaning routine.

The CD that comes with the printer will run a video showing how to run the cleaning cards through the printer. Printer needs 2 unique cleaning cards (1 short & 1 Long)

Posted on Aug 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My zebra p330i keeping on showing downloading data.It doesn't print from PC


Install the driver again.
go to the driver and send the command "R"
and "!SA"
if not working, flash the firmware. (www.zebra.com) have to be the especific firmware
http://www.zebra.com/id/zebra/na/en/index/drivers_downloads/firmware/results.html?productType=6

Nov 04, 2010 | Zebra Eltron P330i Card Printer

1 Answer

Keep getting broken ribbon message on zebra P330i printer


Hello, assuming the supplies are Zebra and there is no discernible damage to the ribbon, it could mean that the ribbon sensor on the printer is broken. if your printer is still under warranty you can ship back to Zebra (Illinois) to get it repaired. The zebra website has info on how to return printers for service. Hope this helps.

Oct 15, 2009 | Zebra Eltron P330i Card Printer

1 Answer

I have Broken ribbon message on the LCD display. I just changed the ribbon and the clean cartridge. Hellp


It could be that the printhead is damaged or the ribbon sensor needs repair. Call Zebra troubleshooting for help. If it is under warranty you can send the printer back to zebra for repair. Takes about 3-5 days. All the info is on their website. good luck.

Jun 16, 2009 | Zebra Eltron P330i Card Printer

1 Answer

Card cutting ribbon on Zebra P330i


On the front of the head. 4 screws are there.
Near the head where the ribbon contacts the card.
Loosen the top 2. Let the metal guard slide down a bit. Tighten the screws. Try a card.
Keep adjusting the guard until you tune it right.

Sketchlab.com

May 13, 2009 | Zebra P330i Thermal Card Printer

1 Answer

ZEBRA PRINTER p4301


Try downloading the newest firmware/drivers (uninstall the old driver first - with the printer off).
and see if that helps.

Nov 11, 2008 | Zebra P330i Thermal Card Printer

4 Answers

Zebra P330i


we have the same problem with our 330i !!

I updated the firmware to V1.16.11 and the printer drivers as well, then I started the cleaning process.
The printer has printed only 337 cards, so it is rather new.

All monocolor printed cards are ok (black, gold,...), but not even one 4color card.
It looks like the sync of the colorribbon does not work properly.
Is there a possibilty to check the sensors or are perhaps informations about the sensors on the cardtest-card ?

Thank you for any help !

Felix
Austria / Europe

Feb 06, 2008 | Zebra P330i Thermal Card Printer

1 Answer

ZEBRA P33Oi "WAIT TEMPERATURE"


Have you cleaned the printhead yet? If it is easy to get to. Use some alcohol and cotton cloth.

Aug 09, 2007 | Zebra Eltron P330i Card Printer

Not finding what you are looking for?
Zebra P330i Thermal Card Printer Logo

Related Topics:

506 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zebra Printers & Copiers Experts

pkwc

Level 2 Expert

254 Answers

lancer284

Level 1 Expert

35 Answers

kenneth njonjo

Level 3 Expert

1575 Answers

Are you a Zebra Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...