- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Sir /Man, FN-117 is a Finisher (Does the hole punching and stapling if those options are available) it does not have a password What is the model of the copier? Do you want the Admin Password or the Service Mode password?
How to set up the machine for SMTP authentication. There is no
selection to enter the information in network setup on the machine. Solution CAUSE: Incorrect soft switch setting. SOLUTION: Perform the following: 1. Touch utility button 2. Admin. Management 3. Admin. 2 4. Software SW 5. Enter the soft switch mode 380. Set bits 6 and 2 to 1. 6. Re-start the machine. The SMTP settings will now appear in the
network setup of the Admin 2 mode to allow entry of the user name and
still having trouble..if default password didnt work for you then try reseting it to default password by: 1) Utility/Counter 2) Details 3) press STOP zero zero + STOP zero one and now your in Tech Mode 4) same page press STOP + Zero + C 5) modify admin password and retype and then exit 6)
do not DO NOT touch any other options unless you know what your
doing..you can lock the machine and would be able to work..rate if this
helped you out