Question about Canon PIXMA MP530 All-In-One InkJet Printer
I have a canon MP220 and have just changed the ink cartridge and it still states that the ink is low. How do I reset it?
Sw off and sw on the printer , Replace the cartdrige and then restart your pc. some time because of cache you need to flush it hence .
Posted on Feb 01, 2009
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
and got to www.google.com In the google search box type: "Canon
Support" (without the quotes and put your manufacturer name before Support).
Look for downloads and drivers. Enter your model number and operating
system when requested. Look for manuals on the site.
An Error Message Is Displayed on the LCD (MP220 series)
The FINE Cartridge may not be installed properly, or the Cartridge may not be compatible with this machine. Open the Scanning Unit (Printer Cover) and install the appropriate FINE Cartridge.
If the error is not resolved, the FINE Cartridge may be damaged. Contact your Canon Service representative.
Jun 02, 2012 | Office Equipment & Supplies
Aug 30, 2011 | Canon PIXMA MP210 Photo All-In-One Printer
Aug 12, 2010 | Canon PIXMA MP210 Photo All-In-One Printer
Feb 03, 2010 | Canon Office Equipment & Supplies
Feb 13, 2009 | Canon PIXMA MP160 All-In-One InkJet...
Nov 30, 2008 | Office Equipment & Supplies
How to reset Canon MX310
printer low ink signal
1. Power off the printer.
2. Holding the stop/reset button, press and hold
power button also. Hold both buttons
together for 5 secs.
3. Still holding the power button, release the
stop/reset buton, then press the stop/reset button twice.
4. Release power button (the screen should now
say 'Service Mode').
5. Wait until the power button lights steady
green, then press the stop/reset button three times with a 3 sec space between
each press. On the 3rd press the
indicator should turn steady orange.
6. Press the power button once, (the orange
light should go off).
7. Open the printer and remove both
cartridges. Wait for 10 seconds. Replace the cartridges and close
printer. Wait for 30 seconds.
8. Press the power button, and wait until
printer has shut down.
9. Press power button to power up. The printer will feed one piece of paper,
then ask you to set the language.
10. The page counter is now reset! Enjoy.
Jul 29, 2008 | Canon PIXMA iP4200 InkJet Photo Printer
Jul 23, 2008 | Office Equipment & Supplies
With the original chip now
attached to the compatible cartridge (you may need double sided tape to
get the chip to stick well to the cartridge), and with the cartridge
now in the printer, Press and hold the Reset/OK Button for 5 seconds to
reset the chips.
Oct 31, 2007 | Canon PIXMA iP3300 InkJet Photo Printer
231 people viewed this question
Usually answered in minutes!