Question about HTC Touch Diamond Smartphone

1 Answer

Incorrect time showing on face clock

My face clock continues to show the incorect time until I touch the screen then it automatically updates to the correct current time, this resolves the issue for a short period and will stay updated for a short time,then the same problem starts again, is this a common fault with the HTC Diamond Flo?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 158 Answers

In that case... remeber to set your phone into an automatic time and date update. You can find it on the settings menu and there goes.. its done.

Posted on Feb 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sony XDR-C705DAB wont set time


please press all buttons at a time it will reset

Nov 24, 2013 | Sony Dual-Alarm AM/FM Clock Radio with...

1 Answer

I can't get my clock set on my GE stove model # JB645DT1BB It said to hold for 3 seconds to change the time but it doesn't change. HELP Please


To Set the Clock
The clock must be set to the correct time
of day for the automatic oven timing functions
to work properly,The time of day cannot be
changed during a delayed cooking or a delayed
self-cleaning cycle,
1. Touch the Clock pad twice.
For models without a Clock pad:
Hold the + and - pads for 3 seconds.

2. Touch the + or - pads.
If the + or - pads are not touched within one
minute after Step 1, the display reverts to the
original setting. If this happens, repeat Step 1
and reenter the time of day.

3. Touch the Start/On pad until the time of
day shows in the display. This enters the
time and starts the clock.
To check the time of day when the display is
showing other information, simply touch the
Clock pad. The time of day shows until another
pad is touched.

http://www.managemylife.com/mmh/owner_manuals/138431/GE-Free-Standing-Electric-1112529L

Sep 19, 2013 | General Electric Stove/Oven/Range Chrome...

1 Answer

How do you set this atomic clock C17D2090 (WIC#628865)


Instructions to set the C17D2090 atomic clock

A. To manually set the clock

1. Use the CAL/ALM button to toggle the display until it shows the calendar
2. Press and hold SET until the screen flashes "12hr"
3. Use the UP (antenna) and DOWN (alarm) buttons to change the settings
4. Press SET to set the value

This mode will let you set the 12/24 hours clock, the time, date and year. You should be in the right time zone before you start.

B. To set the alarm1 time

1. Use the CAL/ALM button to toggle the display until it shows the AL1 alarm time
2. Press and hold SET until the alarm time flashes
3. Use the UP (antenna) and DOWN (alarm) buttons to change the settings
4. Press SET to set the value

C. To set the alarm2 time

1. Use the CAL/ALM button to toggle the display until it shows the AL2 alarm time
2. Press and hold SET until the alarm time flashes
3. Use the UP (antenna) and DOWN (alarm) buttons to change the settings
4. Press SET to set the value

D. To turn on alarm1

1. Use the CAL/ALM button to toggle the display until it shows the AL1 alarm time
2. Use the DOWN (alarm) button to toggle the alarm on and off (a bell appears on the screen)

E. To turn on alarm2

1. Use the CAL/ALM button to toggle the display until it shows the AL2 alarm time
2. Use the DOWN (alarm) button to toggle the alarm on and off (a bell appears on the screen)

F. To have the atomic clock set automatically

1. Press and hold the UP (antenna) button until a little triangle flashes on the screen
2. Wait for clock to set
3. To give up waiting, press the UP (antenna) button again.

G. To change the time zone
1. Tap the ZONE button to toggle between the 4 time zones

Aug 16, 2012 | Audio Players & Recorders

1 Answer

Atomic travel alarm clock. Model number C17D2090 WIC#693047. (No brand name on clock.) I am living in outside US time zones and can't manually reset my clock to the correct time. (I lost the instructions.)...


Instructions to set the C17D2090 atomic clock

A. To manually set the clock

1. Use the CAL/ALM button to toggle the display until it shows the calendar
2. Press and hold SET until the screen flashes "12hr"
3. Use the UP (antenna) and DOWN (alarm) buttons to change the settings
4. Press SET to set the value

This mode will let you set the 12/24 hours clock, the time, date and year. You should be in the right time zone before you start.

B. To set the alarm1 time

1. Use the CAL/ALM button to toggle the display until it shows the AL1 alarm time
2. Press and hold SET until the alarm time flashes
3. Use the UP (antenna) and DOWN (alarm) buttons to change the settings
4. Press SET to set the value

C. To set the alarm2 time

1. Use the CAL/ALM button to toggle the display until it shows the AL2 alarm time
2. Press and hold SET until the alarm time flashes
3. Use the UP (antenna) and DOWN (alarm) buttons to change the settings
4. Press SET to set the value

D. To turn on alarm1

1. Use the CAL/ALM button to toggle the display until it shows the AL1 alarm time
2. Use the DOWN (alarm) button to toggle the alarm on and off (a bell appears on the screen)

E. To turn on alarm2

1. Use the CAL/ALM button to toggle the display until it shows the AL2 alarm time
2. Use the DOWN (alarm) button to toggle the alarm on and off (a bell appears on the screen)

F. To have the atomic clock set automatically

1. Press and hold the UP (antenna) button until a little triangle flashes on the screen
2. Wait for clock to set
3. To give up waiting, press the UP (antenna) button again.

G. To change the time zone
1. Tap the ZONE button to toggle between the 4 time zones

Mar 26, 2011 | Audio Players & Recorders

1 Answer

I have 100 Polycom soundpoint 330 sets integrated with Nortel SCS server. Only the problem I am facing is phones are not showing correct time. Each time phone get reboot , it shows a dafault time , not the...


sir go to the settings >time and date >turns on the auto time zone.in this mode whether you want the clock to be automatically updated when you enter a new time zone............

Nov 26, 2010 | Cell Phones

1 Answer

Electric oven does not work


After a power failure, some models will automatically resume their setting once the power is restored. On models with a clock, you must reset the clock. If the oven was in use, you must reset it by
pressing the CLEAR/OFF pad, setting the clock and resetting any cooking function.

To Set the Clock
The clock must be set to the correct time
of day for the automatic oven timing
functions to work properly. The time of day
cannot be changed during a timed baking
or self-cleaning cycle.
Touch the CLOCK pad twice.
Touch the + or – pads.
If the + or – pads are not touched within
one minute after you touch the CLOCK pad,
the display reverts to the original setting.
If this happens, touch the CLOCK pad and
reenter the time of day.
Touch the START/ON pad until the
time of day shows in the display. This
enters the time and starts the clock.
To check the time of day when the display is
showing other information, simply touch the
CLOCK pad. The time of day shows until another
pad is touched.

If you do not have the owner's use and care manual,
go to this website and get a free download
of your manual by clicking on your model #.
Once you have downloaded it, you can print it up.

http://sz0047.ev.mail.comcast.net/zimbra/mail#4

May 17, 2010 | Hotpoint RB757 Electric Kitchen Range

1 Answer

Time is incorrect on tomtom 330s


Turn on your TomTom and tap the screen until you see change preferences. Tap "change preferences", then tap the forward arrow until you see "set clock". If you don't see "set clock" you may have to tap "show more menu options".

Aug 28, 2009 | Tomtom XL 330S GPS Receiver

3 Answers

Set time on Touch Screen Thermo Clock


Hi there,

Just in case you didn't manage to set the time / date on your tocuh screen thermo clock, I'll try to help you from my experience (no available manual at the moment!).

1. To set the time, touch the clock icon on the upper left corner;
2. Keep touching the screen for longer than 5 seconds, on the hour area;
3. Touch the hour area until you get what you want (if you prefer the 24 hour display style, touch repeatedly until you get the right hour without the AM / PM indicator next to it);
4. Touch the clock icon again to start the clock;
5. Repeat steps 1 to 4 to set up the minutes (the hour area will be replaced by the minutes area);
6. To set the date, tocuh the calendar icon on the left hand side;
7. Keep touching the screen for longer than 5 seconds, on the year area;
8. Touch the year area until you get what you want;
9. Touch the month area until you get what you want;
10. Touch the day area until you get what you want;
11. The screen will reverse to the time display after 5 seconds if no touch.
12. The TEMP (temperature) area, if touched, is toggling between C and Fahrenheit degrees.

P.S. I don't know if it is possible to set an earlier time / date, except touching. I mean, if 2009 is on the screen and you want 2007, you'll keep touching up to 2030 and then from 1901 up to 2007.

Hope it helped.

May 08, 2009 | Watches

1 Answer

How do i change the clock on a sts 2008 cadillac w/navigation sys


Had the same problem...hit CONFIG...then Vehicle on the left side...when the Vehicle screen
shows all the info on languages....hold your finger on the clock in top right corner. The clock
adjust screen should appear. I could never get the clock adjust screen because I was just
touching the time...you have to keep your finger on it until the screen comes up. Hope this helps.

Gary
Virginia

Mar 20, 2009 | 2008 Cadillac STS

3 Answers

White screen


Restore through iTunes 8 if you can...
If you have to do something more dramatic, try resetting it to factory shipping mode.
Hold the Home & Power buttons for 10 seconds, then release the Power button, but continue holding the Home button for another 10 seconds. This must be timed perfectly so use a clock.
If you'd like help, call me.
Dan Crowley, iKnowApple.com 919.280.3101

Nov 05, 2008 | Apple iPod touch

Not finding what you are looking for?
HTC Touch Diamond Smartphone Logo

Related Topics:

202 people viewed this question

Ask a Question

Usually answered in minutes!

Top HTC Computers & Internet Experts

Justin
Justin

Level 3 Expert

2072 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Tom Chichester

Level 3 Expert

30679 Answers

Are you a HTC Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...