Question about Whirlpool Duet GHW9150P Front Load Washer

1 Answer

How can I fix and f11 problem from my kenmore washing machine

I would like to know how to open the machine I believe it has a clog but i dont know how to open the machine and fix the problelm

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 530 Answers

If you hav an f11 error code you have a bad controller. you need to take the lid off. there are 23 t15 torque screws or you can use a 7millimeter socket. remove and slide lid off. directly in the back you will see a white box with lots of wire going to it replace that. this will solve the f11 error. The problem is a communication error between the door lock and the controller. usually what it will do before it fails is make a click click click sound. that's a relay inside the board failing.,

Posted on Feb 01, 2009

  • erica graber Feb 02, 2009

    oops i ment to say there are 3 t15 torques screws

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have an F11 code on my kenmore front load washing machine


After years of suffering from random F11 that became a permanent F11, I did the repair as in the video and all is good for 2 years. No more F11. About one load a day (we have kids!)

Aug 22, 2014 | Kenmore HE2 Plus Front Load Washer

1 Answer

I have an E4 front loader it is flashing F11 what does that mean?


If you're handy, there's a guy on Ebay who seems to specialize in the F11 problem. Here's the web address:

http://cgi.ebay.com/Whirlpool-Duet-Kenmore-HE3T-CCU-Repair-For-F11-FDL-Code_W0QQitemZ230397337074QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item35a4c05df2

I know nothing about him, but he has great feedback.

Jan 16, 2011 | Kenmore Washing Machines

2 Answers

F11 code on kenmore frontload washer HE3t


My f11 code is repaired! I got a clamp from Home Depot put it on the ccu unit on the right side tightened it shut and haven't got the stinking f11 code ever since. No more banging it again! I can finally do my wash without the horror beeping sound going off every time.

May 23, 2010 | Kenmore Washing Machines

3 Answers

Kenmore Elite HE3T washing machine code F11


Kenmore Elite HE3T washing machine error code F28, what does this mean?

Jun 26, 2009 | Kenmore Elite 45986 Front Load Washer

1 Answer

Kenmore elite washer f11 f14 and dl codes


Replace the CCU it is your only choice. They do not make bandaids for washing machines. If you dont fix it you will just have a non working machine soon

Mar 31, 2009 | Kenmore Washing Machines

1 Answer

KENMORE ELITE SHOWS CODE F11, CANNOT STOP WASHER OR CANCEL CYCLE, WHAT COULD BE WRONG....HELP....


Please unplug your machine. Leave it unplugged for a few minutes and then try the cycle over. If the problem is not fixed, you have an electrical problem. It's usually bad signals being sent from the main board. Let me know if I can be of more assistance.

Feb 23, 2009 | Kenmore Elite 45986 Front Load Washer

1 Answer

F11 flashing kenmore he washer


The F11 error code indicates a serial communication failure. This happens when the 2 main control boards are unable to communicate with each other. This is either caused by a loose wiring harness connection or one of the control boards is defective. Good luck and please rate FixYa!

Dec 28, 2008 | Kenmore Elite 45986 Front Load Washer

1 Answer

Door Lock Problem


with panel off reach up to lock location pull down on small tab door latch will click (at this point door would pop open if it were closed ) retry operation to see if ok if code dl reappear may to replace door lock if f11 may need new control module under top rear..ck wires first ..good luck

Sep 09, 2008 | Kenmore Elite 45986 Front Load Washer

1 Answer

Kenmore 2 Way Tumble Action Front Load Washer


no thats two different problems. The rubber piece (boot) forms a seal to prevent the water from leaking out, that should be replaced. Water might have leaked and ruined the pump. At the end of all cycles is there still water in the tub? If so your pump is either clogged or has gone bad, and thats why the washer wont go into extract.

Jul 09, 2007 | Kenmore 44102 Front Load Washer

Not finding what you are looking for?
Whirlpool Duet GHW9150P Front Load Washer Logo

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...