Question about Desa International White Wireless Plug In Door Chime

2 Answers

How do I change the battery in the wireless doorbell button?

How do I change the battery in the doorbell button?

Posted by on

  • jjgrish1814 Feb 07, 2009

    same one how do i change the battery

  • jjgrish1814 May 11, 2010

    no screws is there something to push to slide off door?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

In the wireless doorbell button, you can plug out the old battery, and then plug into the new one, be careful, new one should be the same type as the old one, try it , good luck!

Posted on Feb 23, 2013

  • fravo Feb 23, 2013

    in the wireless doorbell button, you can plug out the old battery, and then plug into the new one, be careful, new one should be the same type as the old one, try it , good luck!

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 373 Answers

Are you to take it off the wall
if so it should have either two screws or slide off door

Posted on Feb 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change the batteries in my Carlon RC8800R doorbell


Do you need to replace the batteries in the chime button or the receiver? To change the batteries on the doorbell (chime button) for most Carlon models, you need a ballpoint pen first to remove the chime button from the back. Press the pen point in the small round hole at the bottom of the button. Then gently push in on the tab. Finally rotate the chime button cover up and away from the back cover. Next take the ballpoint pen or a small screwdriver and place it in the slot below the top battery. Lift the battery up. Repeat this with the second battery. Then place the replacement CR2032 batteries into the battery compartment one at a time with the positive side up.

For the most of the wireless receivers, press the center of the brass tubes and lift those free to replace the 4 D cell batteries (2 behind each tube). A few models have a more obvious battery cover for a set of 4 AA cell batteries.

Many Carlon wireless chime manuals are available here: http://www.lamson-home.com/WirelessChimes.php . The direct link to the manual listed for the RC8800R is http://www.lamson-home.com/ProductSupport/WirelessChimes/RC3304_4300IM_3.06_v2.pdf .

I hope this helps.

Cindy Wells

Oct 09, 2016 | Carlon Home Security

1 Answer

WIRELESS DOOR BELL BUTTON SL-1695-rx


Heath/Zenith SL-6166-C Wireless Plug-In Door Chime Kit ...

www.amazon.com > ... > Door Chimes & Bells > Kits
Amazon.com, Inc.Heath Zenith SL-6198-B Wireless Doorbell Replacement Battery. Total price: ... Plug-in doorbell chime, doorbell button/transmitter with battery, hardware pack ...

Oct 16, 2015 | Home Security

1 Answer

How do I change the battery on the Door Push Button?


Easy....You'll need a very small screw driver. There's a small hole on one of the long ends (most are rectangular in shape). For the brand of door bell I have (Thomas and Betts/Carlon), you push in and downward with the screwdriver. This pushes out the bottom (back of doorbell button). In my case, there are (3) CR 2032 Button Cell batteries in a stacking position. As a quick side note -> If your wireless doorbell button does use button cell batteries. Look to Ebay to purchase them. You can get 6-10 batteries shipped to your front door cheaper. Rather than 3-4 batteries at a retail store + tax...Hopefully, I have lent you some assistance...Thanks for reading

Apr 25, 2015 | Carlon Wireless Doorbell system with...

1 Answer

Id like to change song on my doorbell Dimango model 4330 r cd chime reciever


The webpage http://www.dimango.com/dc-cd-quality-doorbells.htm

shows:

Wireless Doorbell CD Quality Door Chime
Model RC4300

No longer do you need a wired door chime or traditional doorbell with brass tubing to get amazing, rich sound. Our Battery Operated Door Chime from Dimango has CD quality sound while remaining completely wireless...







  • Plays three selectable sounds



    1. Ding Dong


    2. Dong


    3. Westminster Chime Click To Hear Sound!




  • Set sound conveniently at button




It seems that there is a button on the receiver/speaker. Try press once and see if the sound changes.

Nov 27, 2013 | Desa International White Wireless Plug In...

1 Answer

Doorbell doesn't work


It seems your doorbell transmitter got wet and corroded the contacts.
These push buttons are not sealed at all and thus will let rain, snow etc. eventually corrode the electronics.
Solution: Find a new push button on eBay.


Cheers

Feb 26, 2013 | Desa International White Wireless Plug In...

3 Answers

Phantom bell rings on Siemens wirreless door bell chime jsjs-204, I do not have instructions


You may need to change the frequency of the chime. In this model, you need to remove the batteries from the receiver unit and wait for a while. Then replace the batteries. The doorbell unit should automatically set itself to a different frequency once you press the button, which will(hopefully) solve the problem.

It seems impossible to find the instruction manual for the doorbell. But see http://oddsnsods.net/blog/?p=68 who had a similar problem with a different Siemens model, which works on the same principles. (I can't seem to be able to remove the battery from the door bell unit on the jsjs204, but it reset itself after changing the batteries in the receiver).

Nov 01, 2011 | Desa International White Wireless Plug In...

3 Answers

Hello I have now got 2 (two) of these units over the past 8 months and neither work----changed batteries--interchanged push button---changed main unit--nothing works----but when my neigbour across road has...


The doorbell buttons and your receiver must be on the same channel. If you will get out the directions that came with your unit, they will describe the process to go through to reset the specific "codes" for your buttons and receiver.

Jan 04, 2010 | Desa International White Wireless Plug In...

1 Answer

I changed the batteries on my door bell, and it still wont ring


Troubleshooting
Chime does not sound:
• Make sure the doorbell button and the chime codes are the same (See pages
2 and 3).
• Check orientation of doorbell button battery (See page 3).
• Check the doorbell button and chime batteries, replace if necessary.
Batteries seem OK, but the chime does not work when installed:
• Do not mount the chime or doorbell button on metal or near metal studs. This
reduces the transmitter range. Use 1/4" to 1/2" (6 to 13 mm) wood shims to
move the chime or doorbell button off the metal surface.
• Don't mount the chime too close to ground level concrete slabs. This may
also reduce the range. Mount the chime away from the floor.
• Try different locations for the chime closer to the doorbell button. Also try to
orient the chime at a different angle to increase the range.
The range of the doorbell depends on location, temperature and battery
condition.
Regulatory Information
This device complies with Part 15 of the FCC Rules and RSS-210 of Industry
Canada. Operation is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
The user is cautioned that changes or modifications not expressly approved by
the party responsible for regulatory compliance could void the user’s authority
to operate the equipment.
Technical Service
Please call 1-800-858-8501 (English speaking only) for assistance
before returning product to store.
If you experience a problem, follow this guide. You may also want to visit our
Web site at: www.hzsupport.com. If the problem persists, call* for assistance
at 1-800-858-8501, 7:30 AM to 4:30 PM CST (M-F). You may also write* to:
HeathCo LLC
P.O. Box 90004, Bowling Green, KY 42102-9004
ATTN: Technical Service
* If contacting Technical Service, please have the following information available:
Model Number, Date of Purchase, and Place of Purchase.
No Service Parts Available for this Product

Jan 02, 2010 | Desa International White Wireless Plug In...

Not finding what you are looking for?
Desa International White Wireless Plug In Door Chime Logo

2,882 people viewed this question

Ask a Question

Usually answered in minutes!

Top Desa International Home Security Experts

Eric Kalman
Eric Kalman

Level 1 Expert

5 Answers

Steven R

Level 2 Expert

100 Answers

Julian Pearson

Level 1 Expert

20 Answers

Are you a Desa International Home Security Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...