Question about Office Equipment & Supplies

1 Answer

Error code SC142

Hi, I just ran into this problem and I don't know what the code is. I think it has to do with the standing white plate. Also, I could not get into service mode the normal way. Is there a new way of getting into service mode. The only thing I know about the copier is that it has not been installed yet. Thanks for any help

Posted by on

  • 1 more comment 
  • Chris Coughlin
    Chris Coughlin Feb 02, 2009

    It's a Ricoh MP-9000.. How do you get in to service mode? I tried clear-1-0-7-stop, but it did not work

  • Chris Coughlin
    Chris Coughlin Feb 03, 2009

    Dude, you need to take a chill pill.... I did have a comment thanking you. But, I hit the wrong box for thanking you. The sceen changed, I did not have time to reply again. I was running late for work. I knew that was the solution. I wanted to know why the service mode was not letting me in. Have a better Day

  • jpd8 May 11, 2010

    Need make and model????



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.


    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 126 Answers
  • jpd8 Feb 02, 2009

    Clear mode ( square botton towards top) botton --- 1-0-7 hold down the clear/stop botton ( circle botton) until display changes to SP mode.

    These must be pressed some what quickly.

  • jpd8 Feb 03, 2009

    Sry but F-U. This is the fix, how to get into tech mode, how to solve the problem--- and you give me a 'thanks anyway' --- F-U. you are marked for no future help. Have a good day.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Kenmore bottom freezer 795.78309.804 codes er/ff what do they mean? is food going bad?

Model number 795 it's an LG fridge. Even if it says Kenmore on it. LG is the manufacturer of that fridge. If it's a newer fridge & or your the original owner. Take the kick plate off the bottom front of the fridge. Either in that kick plate or looking in were that kick plate was on the top wall of the bottom of the fridge you'll see a plastic envelope with sone folded up papers in it. Those white pages are called tech sheets for the tech that comes to your house to fix your fridge. They are best left under the fridge or in the kick plate but alot of the time they aren't put back. Why I asked if yiur the original owner. If you are able to locate those tech sheets. They should list the trouble codes and what the code stands for. I don't remember what it stands for. Taking a guess it means error fresh food or er/ff. Don't quote me on it I'm not sure of my answer but I think it's a faulty thermistor in the fresh food section. Fresh food section is the refrigerator section. Please check to make sure you have the correct problem before doing anything. I'm taking a guess just from memory as to what the error code is. At least with the tech sheets, hope they are there. You'll be able to find out what the code means.

Hope that helps you a little or alot. Thanks

Oct 17, 2016 | Kenmore Refrigerators

1 Answer

Canon ir c3220 color copier error E000020-01b0. What means? How solve that error?

Canon Error Code E000020 01b0

Although the yellow drum is indicated, in the link above, please note it may not be the yellow drum if instead it is the:"laser shutter or the plastic actuator on the right side of the front door."

Jan 24, 2018 | Office Equipment & Supplies

1 Answer

Lanier LD032

Hi Dwayne:
This error occurs when performing the white level detection. Check:
a - The white board on whether or not this position
b - Glass and Optical
c - UBS Card - (card may be faulty)
d - BICU Card (may be faulty)
e - Check the optics and connectors to the cards.

I have heard that several times after cleaning the mirrors of the scanner worked.

Hope this helps; also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using Fixya, and have a nice day.

Nov 10, 2011 | Lanier Office Equipment & Supplies

1 Answer

Dsc224 ploblem sc142

Error Detection White Balance
The White Balance can not be resolved glass or optical section
within the target at the Spotted
automatic gain control. Card SBU defective
Map BICU defective
Exposure lamp defective
• Cruise the lamp defective

May 31, 2011 | Gestetner DSc224 Copier

1 Answer


if the error is E007 - fuser film off track and will not repair it self
if you don`t know to replace call for tech.

Nov 10, 2010 | Office Equipment & Supplies

1 Answer

I have a Kenmore dryer model #417.84052500 that won't start. It has a sequence of flashing lights that I think is an error code.I opened up th e top and lower panel and no tech sheet ,so i don't know what...


May i know, what are the lights that are flashing and how many times each light flashes..
Please leave these details as comment, and we will provide further assistance

Oct 31, 2009 | Washing Machines

1 Answer

Sc142 error on richo 1224


SC142: White level detection error.

click these links for more info

link 1

link 2

Good Luck

"Appreciate to rate as FIXYA"

Jul 07, 2009 | Ricoh Office Equipment & Supplies

1 Answer


have you turned of your emu, that may help but cant under stand why you havent got any channels at all, give it a check though gl

Aug 08, 2008 | StarView SV211K 2-port KVM...

3 Answers

H07 on panasonic

hey I just messed around with mine it was showing that code H07 like the others its kinds the same except it holds 4 more disc, I took the top off then I took the thing that holds cd still off!, there should be a brass thing I think thats for the ground, so I ended up putting some synthetic oil on the rails silver poles that the laser slides on, and where the disc sits on that black circle under it, you can see the motor it has a white thing on the motores pole so I just put a few drops on there then spinds it put some more on hoping it works its way DOWN INTO THE MOTOR thats the H07 not spining fast enough!! I put a disk in while everything was apart and its playing right now, the oil I desided to use was the stuff I use for my paintball gun lol! its really thin and slippory and im sure it will last for awhile!.... going to add more after 15 minutes of playing just to make sure its really lubed! hope this helps!!!!

Jan 10, 2008 | Panasonic DVD-CP67 Multi-disc DVD Player

2 Answers

Error code sc142

I could not find any detailed explanation of what this "service code" means, but most of the "what to do" answers on their website say to contact your local sales/service office. Here is their website:

Feb 23, 2007 | Gestetner DSc224 Copier

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

1,234 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts


Level 3 Expert

102366 Answers


Level 3 Expert

2237 Answers


Level 3 Expert

77499 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides