Question about Mitsubishi WD-52525 52" Rear Projection HDTV

1 Answer

46" Hitachi 465" Hitachi model number is 46W500 kept shorting out H.O.T after a few days

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 150 Answers
Re: 46" Hitachi

Thats an awful big television, check the retrace cap and solder connections on the horizontal drive components.

Posted on Aug 01, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Model -46w500

you can download or read your manual in this link
hope that it helped

Jan 06, 2014 | Hitachi Projection Televisions

1 Answer

Screen will not turn off

Model does not sound like Hitachi but if it is have you unplugged the set? The magic focus is a auto convergence circuit in the Hitachi sets.

Nov 01, 2012 | Hitachi Projection Televisions

1 Answer

My TV shuts off after a few minutes

Welcome to FixYa.

Check the "sleep timer" settings. The sleep timer automatically shuts off the TV at a given time. It can be found under the settings or system menu.

I cannot provide you with further details on how to go about it as you have not provided the specific model number of your TV.

You ca post your question again along with the specific model number of your Hitachi TV.

Thank you for using FixYa.
Have a great day.


Aug 02, 2011 | Hitachi Projection Televisions

1 Answer

I have a Hitachi 46W500 about 7 years old has sound but just blinks solid colors red green white.

The Tv processor is locked up on the set if you unplug the set from the wall for 40 Min, it will reset back to normal.

Nov 23, 2010 | Hitachi Projection Televisions

1 Answer

Hitachi 46W500 loses video after 10 seconds when connected to motorola HDPVR using HDMI/DVI cable. Works with Yb Yr...ideas?

Check your setup in HDPVR lower resolution to 720P or 1080I or check HDMI cable adaptor or set your Hitachi on auto detection video in MENU
Good luck

Dec 02, 2008 | Projection Televisions

1 Answer

Hitachi 46w500

Good Day, reddragon244;
You may not be able to see the cold solder connection, just go ahead and solder both connections on the Crystal.
Good Luck, big IRISH.

Aug 19, 2008 | Projection Televisions

1 Answer

I have a hitachi projection tv model 46w500. my problem is that when im watching cable, or anything for that matter the picture starts flashing rgb colors, or it show black distorted colors.

Good Day, reddragon;

Symptom: Flashing different colors, R, G, B.
Cause: Check for cold solder connection on Crystal XY06 off pin 10 of IC IY04, Terminal pwb.


Aug 12, 2008 | Projection Televisions

1 Answer

The aspect is off

Good Day, spaceace33;

Try this:

Symptom: No control of aspect, DCAM may come on by itself, anything other than 480i into component causes rolling and tearing
Cause: Replace I010, This part is a 3.3 volt (micro) to 5 volt (other logic) level shifter HD74HCT245AF, Hitachi part number CK38491R
Hope this was helpful, big IRISH.

May 19, 2008 | Hitachi 46F510 46" Projection HDTV

2 Answers


If you have Hitachi model number 50UX58B, 60UX58B, 50UX58K, 60UX58K, 50SBX78B or 60SBX78B and you have the following symptoms you may want to grab a repair kit from They have put together a kit that includes the parts and instructions to fix these models. This is a fairly common problem with the above model numbers. It is typically caused by a blown capacitor and pico fuse. Again, you can get a kit from the above address. 
Here are the symptoms...

Primary Symptom: No Audio or Video. Power light will come on briefly then shut off.
Other Possible Symptoms : The green LEDs on the circuit board light up for a few seconds then turn off.

Hope this helps,

Jan 13, 2008 | Hitachi 60UX58B 60" Rear Projection...

3 Answers

Chirping noise and flashing front power light.

Theres a short somewhere in the set. Most likly the HOT is shorted or the vertical IC has caused this in the past. In one case I had shorted convergence IC cause this symptom.. This set is solid state and there are no user serviceable parts inside so please call a trained tech to assist you with this problem Good Luck

Aug 17, 2006 | Hitachi FDX Series 43FDX10B 43" Rear...

Not finding what you are looking for?
Mitsubishi WD-52525 52" Rear Projection HDTV Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Projection Televisions Experts

matt martin
matt martin

Level 3 Expert

1187 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

66352 Answers

Are you a Mitsubishi Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides