Question about Kenwood KDC-225MR 200W Car/Marine SIRIUS Ready CD ReceiverKDC-225MR

1 Answer

225 mr will not play burn MP3's

I have try to burn MP3's several different ways but it will not play any of my burned cd's

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 39 Answers

I have the manual and copied it verbatim for you. Please let me know if you need me to scan the manual for you. Acceptable medium formats: The following formats are available for the media used in this unit. The maximum number of characters used for file name including the delimiter (".") and three-character extension are indicated in parentheses. ? ISO 9660 Level 1 (12 characters) ? ISO 9660 Level 2 (31 characters) ? Joliet (64 character; Up to 32 characters are displayed) ? Romeo (128 character; Up to 64 characters are displayed) ? Long file name (200 characters; Up to 64 characters are displayed) ? Maximum number of characters for folder name: 64 (Joliet; Up to 32 characters are displayed) For a list of available characters, see the instruction manual of the writing software and the section Entering file and folder names below. The media reproducible on this unit has the following limitations: ? Maximum number of directory levels: 8 ? Maximum number of files per folder: 255 ? Maximum number of folders: 50 MP3/WMA written in the formats other than the above may not be successfully played and their file names or folder names are not properly displayed. Settings for your MP3/WMA encoder and CD writer Do the following setting when compressing audio data in MP3/WMA data with the MP3/WMA encoder. ? Transfer bit rate MP3: 8 ?320 kbps WMA: 48 ?192 kbps ? Sampling frequency MP3: 8, 11.025, 12, 16, 22.05, 24, 32, 44.1, 48 kHz WMA: 32, 44.1, 48 kHz When you use your CD writer to record MP3/WMA up to the maximum disc capacity, disable additional writing. For recording on an empty disc up to the maximum capacity at once, check Disc at Once. Play mode may not be possible when portions of the functions of Windows Media Player 9 or higher are used. Entering ID3 tag: The Displayable ID3 tag is ID3 version 1.x. For the character code, refer to the List of Codes. Entering file and folder names: The code list characters are the only file names and folder names that can be entered and displayed. If you use any other character for entry, the file and folder names are not displayed correctly. They may neither be displayed correctly depending on the CD writer used. The unit recognizes and plays only those MP3/WMA which have the MP3/WMA extension (.MP3/.WMA). A file with a name entered with characters not on the code list may not play correctly. Writing files into a medium: When a medium containing MP3/WMA data is loaded, the unit checks all the data on the medium. If the medium contains a lot of folders or non-MP3/WMA files, therefore, it takes a long time until the unit starts playing MP3/WMA. In addition, it may take time for the unit to move to the next MP3/WMA file or a File Search or Folder Search may not be performed smoothly. Loading such a medium may produce loud noise to damage the speakers. ? Do no attempt to play a medium containing a non-MP3/WMA file with the MP3/WMA extension. The unit mistakes non-MP3/WMA files for MP3/WMA data as long as they have the MP3/WMA extension. ? Do not attempt to play a medium containing non MP3/WMA.

Posted on Jul 31, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Burned cd wont play in 2002 cadillac deville


Burn in compatibly mode for use on most CD players and close session. Some older players only play + or - CDs try different media.

Apr 25, 2014 | 2002 Cadillac Deville

1 Answer

Pioneer mofet won't play mp3s


Well IF your player burns mp3 do a few things.
Confirm the disk plays in something else
Re-burn on the slowest setting for burning.
Try a different brand disk

Aug 20, 2012 | Pioneer DEH-2900MPB, MOSFET 4x50W Max WMA,...

1 Answer

I am trying to burn an audio CD with Roxio. I can get it to burn but my stereo will not recognize the disk as Having anything on it. I have tried several different things and it isn't working. What can I...


Try a different type of CD. If you're using CD+R discs, change to a CD-R and see if it works better for you. Also, make sure you finalize your session to verify that olde CD-ROM readers will read the disc. If you're burning MP3 files, make sure you're converting them to audio files on the way to the disc, as older stereos will not read MP3 files.

Feb 14, 2011 | Mad Dog Multimedia USB 2.0 External Drive...

2 Answers

If I want to record let's say someone speaking for 90 min and burn 2 cd's , one 60min and the other 30 min from the one 90min recording , each one divided into tracks , how would I do this ?


If you want to burn a CD you have to make a master. For 2 cd's you have to make 2 masters, one for each recording.
The best way to handle this is to "create a song" for each speech giver and give each a name.This is because you can make only one master copy of a song before burning a Cd.

But another way is to :
1. Make a master of the first speech giver (who is on one track) and record to the Cd.
2. Make a new master of the second speech giver (on the other track) and record to Cd.
As long as you don't mind, the second mastering will overwrite the first one that you did, but then you already have burned a copy of that Cd!

Nov 02, 2010 | Tascam Dp-02cf Digital 8-track Recorder

2 Answers

Why does Burn't Audio CD not play on some CD Players


because the codec's are different, if you have ever burned a avi file and it didnt play till you added say divx ir xivd to get it to play tech leaves out alot of the codec's so there system will work on most but not all cd's dvd's the only way around it is to find out which codec will work for that player to test what I have just told you take the cd to the store and try it on a different mechine and see if it works

Jan 14, 2010 | Teac AD-600 3-Disc CD Changer

2 Answers

When playing a burned mp3cd all I get is noise


It is the way it is burned. On the program you are using, it is set for all songs on one track, not sure about the noise. I recommend using windows media player 11. Go to media player, select burn, create list. Then drag all the songs from library to the burn list on right side, and hit burn. That's all there is to it.

Jul 05, 2009 | iLO XM-MP3-CD Car Stereo

1 Answer

CD player won't play MP3 CD's?


I have had similar problems in the past - on one computer discs burned using nero were unreliable but using Windows Media Player they were fine and on other computers the Windows programme was useless and produced unreliable inconsistent results.

I suggest you experiment with different burning software and maybe suspect the drive you are using might be past it's best.
I have several cd players in my vehicles and around my home. Only a couple of them will play all the discs and most of them are very choosy and will only read premium price shop bought discs and it is a waste of time trying to play a discount store or freebie disc, or many of my computer burned discs.

I don't know what the differences are - maybe it is the software or the power of the laser burning the disc or the sensitivity of the reading laser, but there are many differences in there somewhere. The situation is very frustrating...

Mar 19, 2017 | 2000 Nissan Maxima

3 Answers

Want to play cd on old cd player


If you want an old CD Player to play a disc burnt on a PC, the file format has to me .wav. Most burning software will convert other formats to .wav files.

Feb 20, 2009 | NAD C522 CD Player

3 Answers

WMA/MP3 Playback will not work


This may be a problem with the internal software within the pioneer device. Try burning your music using the wav extension. these files are larger than the mp3 but, this should play well. you may need to try an updated version of the burning software you are using as well. this could be the problem.

Jan 27, 2009 | Pioneer DEH-P840MP CD Player

2 Answers

Won't play recorded cd's


Try this link. It offers resistor changes which are designed to fix your problem of inability to play any CD R. on that model Nakamichi. jacknz0 http://home.cogeco.ca/~niteowl/Nak_MF51.jpg

Dec 31, 2007 | Nakamichi MF-51 5-Disc CD Changer

Not finding what you are looking for?
Car Audio & Video Logo

281 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4979 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Marvin
Marvin

Level 3 Expert

81294 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...