Question about Yamaha HTR-6130 Receiver

2 Answers

HTR-6130 will not turn on

When I press the power button on my Yamaha HTR-6130 home theater receiver, it comes on for a millisecond then shuts off. Sometimes it displays "Check SP Cable" but then shuts down. I have checked all of my speaker cables and nothing is crossed and all possitives are matched.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,175 Answers

Hi

Does the receiver have a switch that allows you to turn off all the speakers?
If so,turn them off and see if the problem stays.

If it still kicks off then , one of the power amp outputs has failed and it will require some fixing

Posted on Feb 04, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 336 Answers

Remove all speakers from the receiver and try powering it up again. If it still shuts down odds are it needs repair of one of the output channels.

Posted on Feb 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Yamaha HTR 6130 surround sound amp just froze up on me and won't turn off or on or control the volume ect. I'ts on but will not do anything, I can't control from remote or the unit itself at all.


HI
i think the unit needs to be set back to factory defaults
procedure is
Initializing the HTR 6130

1. Connect the power cable of this unit to the AC outlet.
2. Press the "STANDBY/ON" key while simultaneously pressing the "STRAIGHT" and "AUDIO SELECT" keys.
The self-diagnostic function is activated.
3. Select the main menu "13. FACTORY PRESET".
4. Select the "PRESET RSRV".
Hope this helps
Kind regards.
M.Mathis

Apr 14, 2016 | Yamaha Htr-6130bl 500 Watt 5.1-channel...

1 Answer

Need HTR-6130 Manual.


The manual is available as a pdf file from yamaha directly at http://usa.yamaha.com/products/audio-visual/av-receivers-amps/htr/htr-6130_black__u/?mode=model
Midway down under the "support" tab.

May 29, 2011 | Yamaha HTR-6130 Receiver

4 Answers

Yamaha HTR-6130 Receiver will not stay on! Shuts


One last try with everything disconnected!
Other than that I suspect internal surge damage.

Aug 04, 2009 | Yamaha HTR-6130 Receiver

1 Answer

All Yamaha HTR-6130 codes don't work on DirecTV remote


try 30176 and dont forget to assign the remote to turn up the receiver not the tv

Jul 04, 2009 | Yamaha HTR-6130 Receiver

1 Answer

What's NEC PF68S33 TV's remote control code for YAMAHA HTR-6130


I had similar problem when setting up the YAMAHA remote control for my NEC LCD TV. At the end I found I did not follow the YAMAHA manual properly. Did you hold down the DTV/CBL button, and AT THE SAME TIME press the AV POWER for 3+ seconds? You should be able to "REMOTE SETUP OK" displayed in the front panel of the YAMAHA AV receiver. Hope this helps. BTW, only the TV POWER, TV MUTE and the numeric buttons work in my case.

Dec 30, 2008 | Yamaha HTR-6130 Receiver

1 Answer

Cable company remote cannot find Yamaha HTR-6130


this one worked for me...well...sort of, no power, but it got the big one! VOLUME! 0176 and to clarify this is to reply to houseof5girl, this worked on a motorola dvr from cox.

Dec 28, 2008 | Yamaha HTR-6130 Receiver

1 Answer

No sound from the speakers when we use DVD or XBox


Take the remote and press theDVD button. That will change the sound system from TV to your DVD. When you switch back to TV, dont forget to switch this back by pressing DTV/CBL white button

Dec 28, 2008 | Yamaha HTR-6130 Receiver

1 Answer

No audio comes from the rear right speaker. what am i doing wrong with connecting the speaker on the htr-6130?


Swap the rear right speaker to rear left make sure the speakers and speakers wire are OK
Initializer the unit as follow set the unit in STBY mode if you are not sure which mode turn off the unit with the remote control now the unit is in STBY mode. Pressing STRAIGHT and AUDIO SELECT keys simultaneously then press power STBY button on front panel the display will show 1: Analog ByPass use the PROGRAM knob to move up to 13 PRESET INHI then press 1 or 2 keys to change to PRESET RSRV then turn off power now unit reset to factory just turn on and try it
Let me know how do you go
Cheers
PS: this model have an update firmware if your is still under warranty bring it back to Yamaha or 1 of the service center Yamaha they are able to update for you. Due to confidence I can not post that firmware sorry for that inconvenience

Nov 28, 2008 | Yamaha HTR-6130 Receiver

Not finding what you are looking for?
Yamaha HTR-6130 Receiver Logo

482 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Audio & Video Receivers Experts

Larry Stiles
Larry Stiles

Level 2 Expert

286 Answers

jonpoint

Level 1 Expert

4 Answers

Are you a Yamaha Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...