Question about HTC Touch P3450 Smartphone

1 Answer

During a call,phone will switch automatically to hold or...

...speaker on .when receiveing or making a call,the phone switches automatically to speaker on or hold,thus completely compromising comunication.this wasnt happening before and the phone hasnt suffer any damage.I tried hard resets,soft resets and nothing: the phone keeps switching when a call is made or received.

could it be a virus?
help me please,i like my HTC touch flow but this is completely annoying,specially since the phone has been with me for only a few months.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,223 Answers

Try resetting the device

hard rest factory default settings = when ur set is switched off press both buttons call and end key and then press power button on upside of pda for like 5 sec screen will appear asking to format all data take out ur card if u dont want to format that now confirm by pressing the centre action button in 4 side joystick and go

otherwise go and update ur pda software with latest at i mean ROM and see if it helps

Posted on Feb 20, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

I have purchased 2 of these speakers. I want to Bluetooth connect them to my iphone. How do I do this and get music from both speakers?? Thx

If you have purchased Speakers with Bluetooth Connectivity capability you can do this by switching on the speakers and on your iphone use the Bluetooth Pairing Option from Bluetooth settings to establish connectivity and play music to hear from speakers

Jun 15, 2015 | Audio Players & Recorders

1 Answer

My center speaker connection is faulty?

There should be some fault to internal output circuit.

May 11, 2013 | Philips Audio Players & Recorders

1 Answer

I have a Shift 3 lcd touch panel phone with 12 digit calculator.I cannot find the manual for this phone.I can receive calls but cannot call out.A manual would be helpful Thanks

  • Check your phone to make sure it is set up properly. Open the back of the phone by pressing your fingertip on the small lever that opens the battery area. The battery cover will come off in your hand. Insert three "AAA" batteries into the back of the phone so you can use the night light feature. Replace the battery cover by sliding it into the battery area and clicking it into place with your fingers. Connect the phone to the telephone phone jack by connecting one end of the wire to the phone and another end to the wall jack. Connect the handset to the phone by inserting the end of one end of the curly phone wire to the handset and the other end into the side of the phone. Listen to the dial tone by pressing the speakerphone or picking up the handset to make sure your Innovage LCD touch panel phone is connected.

  • 2

    Review calls you missed. Use the up and down arrows on the Innovage LCD touch panel phone to view the caller ID phone numbers.

  • 3

    Use the night light to view the Innovage LCD touch panel in the dark. Slide the switch on the front of the panel to turn the night light function on. Slide the switch to the off position to turn the night life off.

  • 4

    Adjust the volume on your speaker by selecting the speaker loudness that you want. Press the hands free button once and press the "Delete" button. Choose a loudness from one to four.

  • 5

    Press the hold button on the front of your Innovage LCD touch panel phone. This will activate the hold function when you are on a call and it will allow music to play while someone is on hold. The hold music is built in to the phone and will automatically play when you press hold.

  • 6

    Save a phone number as a VIP number on your Innovage LCD touch panel phone. Press set and save when an important number comes onto your caller identification. This makes it harder to delete the phone number by accident.

  • Read more: Innovage LCD Touch Panel Phone Instructions '

    Sep 23, 2011 | Innovage Speaker/Caller ID* LCD Touch...

    1 Answer

    Yamaha receiver shuts off automatically after two seconds. Changing Inpedence switch has no impact.

    Does disconnecting all the speakers make a difference? If so, troubleshoot the short out to a speaker.

    If not, it's due for a trip to the ER.

    Dec 31, 2010 | Yamaha RX-V595A Receiver

    1 Answer

    No sound on my radio anymore, display gives radiostation but no speakersound; my phone , video still working! Who can help me out?

    Check on the front panel of this receiver for a speaker switch or button. If there is one there, which there usually is.. PUSH IT (or them) This problem has happened to the most knowledgeable professionals in the sound business. Give it a shot.
    If there is any sound coming from any speakers, it is not the speaker switch.
    Sometimes a frayed wire shorting out can shut down the sound on a receiver. It's a because of the protection circuit in it.
    There is a form of automatic muting on most FM receivers. If the station is too weak or the antenna is not connected or working properly, you can get silence for the unit.
    Hope this helps,

    Dec 30, 2010 | Denon DRA-455 Receiver

    1 Answer

    My pioneer VSX-1016 shuts itself off during loud portions of a movie. I have checked the speaker wiring and have clean connections. Any other ideas?

    Yes, evaluate the load presented to its amplifiers by the speakers. If you have any speakers running parallel on the amps instead of one per amp channel you could be experiencing temporary unacceptable drops in impedance.


    From page 57 in the manual...

    • Turn down the volume.

    • Lower the 40 Hz and 125 Hz equalizer levels in the Manual MCACC setup on page 34.

    • Try switching on the digital safety feature (put the receiver into standby, hold down the SYSTEM SETUP button on the front panel and press STANDBY/ON to switch between SAFETY ON and SAFETY OFF

    . If the power switches off even with SAFETY ON selected, turn down the volume.

    Dec 29, 2010 | Pioneer VSX-1016 Receiver

    1 Answer


    Troubleshooting Kinect audio problems Page ContentBelow is a list of common Kinect audio problems along with suggested solutions.
    If you are experiencing...
    Try this...
    An echo
    • Turn off digital effects on your audio receiver. Digital effects include things such as reverb, compression, and synthesized surround sound modes.
    • If you are using a TV and an audio receiver at the same, turn off the volume on the TV.
    • Use the Kinect Audio Tuner.
    • If you are hearing an echo during Xbox LIVE gameplay but not while you are playing offline, the problem might be with another player's Kinect sensor. Ask the other player to run the Kinect Audio Tuner.
    No sound from one or more speakers
    • Make sure that the Xbox 360 A/V cable is properly connected to your audio system.
    • Make sure that all speakers are connected to your audio system.
    • If your audio system has speaker switches, make sure that the switches are on.
    • If your audio system has a receiver mode, make sure that the setting matches the number of speakers connected. For example, If you have Use this mode Two speakers Stereo Five speakers and a subwoofer 5:1 Seven speakers and a subwoofer 7:1
    Kinect voice commands are not working
    Run the Kinect Audio Tuner
    Your friends cannot hear you during chat
    Make sure that the chat microphone on the Kinect sensor is on. Here's how:
    1. On your console, go to My Xbox, and then select System Settings.
    2. Select Kinect Settings.
    3. Select Chat Microphone.
    4. Select On.

    Dec 11, 2010 | Microsoft Xbox 360 Console

    3 Answers

    Twice now my Pioneer VSX-819H has shut down. Can not get any power to it. The first time I'm sure the phono pre-amp caused a surge. I no longer have it hooked up. The servicer said nothing was wrong and...

    I found this for the VSX918, 818. Perhaps it's similar.

    The power does not turn on. • Disconnect the power plug from the outlet, and insert again.
    • Make sure there are no loose strands of speaker wire touching the rear panel. This could cause the receiver to shut off automatically.
    The receiver suddenly switches off and the power indicator
    • After about a minute (you won’t be able to switch the unit on during this time), switch the receiver back on. If the message persists, call a Pioneer authorized independent service company.

    Resetting the main unit
    Use this procedure to reset all the receiver’s settings to the factory default. Use the front panel controls to do this.
    1 Switch the receiver into standby.
    2 While holding down the ADVANCED SURROUND button, press and hold the
    STANDBY/ON button for about three
    3 When you see RESET? appear in the display, press ‘
    ST –’. OK?
    shows in the display.
    4 Press SOUND RETRIEVER to confirm.
    appears in the display to indicate that the receiver has been reset to the factory settings.

    Mar 02, 2010 | Pioneer VSX-819H-K A/V Receiver

    1 Answer

    Samaung tocco

    After your receive your call, you need to do the following
    1) Press the centre key (key on the phone not on the screen)
    2) On the touch screen, you will see a speaker icon. Just press that.
    It will switch the loud speaker ON.

    Dec 11, 2009 | Samsung Tocco F480 - Pay Monthly Cellular...

    1 Answer

    LG Vu C920 automatically switches off while charging

    i know this sucks but you may need a new battary.

    Apr 13, 2009 | LG Vu CU920 Cellular Phone

    Not finding what you are looking for?
    HTC Touch P3450 Smartphone Logo

    64 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top HTC Computers & Internet Experts


    Level 2 Expert

    170 Answers

    Les Dickinson
    Les Dickinson

    Level 3 Expert

    18420 Answers

    Tom Chichester

    Level 3 Expert

    40547 Answers

    Are you a HTC Computer and Internet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides