Question about Whirlpool 24 in. GU980SCG Built-in Dishwasher

1 Answer

Whirlpool dishwasher dosen't stop continue to run

It starts a cycle but never stops. It just keeps running.

Posted by on

  • dnapogue Feb 16, 2009

    Kenmore Quietgard Standard less than two years old. It runs and runs. Tonight I timed it and cut it off at one hour ten minutes. It was still in a "wash" cycle. It does this consistently.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 640 Answers

Defective control board...onthejob

Posted on Jan 31, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My whirlpool gold series dishwasher will not stop running through cycles unless i open the door. It will just continue to run for hours. Any relatively easy fixes before i call backup?


Some dishwashers can run for 4 hours or more normally depending on the options you choose. What do you mean by it runs through cycles is it always changing cycles by itself or is it just the cycle you pick just keeps on going, have you tried a quick wash or 1 hour wash does it do it then? is you hot water hot enough? if not it makes the unit run longer because it has to heat the water up. always run the hot water at the sink to bring hot water up from the water heater to the sing so the dishwasher fills with hot water and not cold.

Dec 28, 2016 | Whirlpool Dishwashers

1 Answer

Whirlpool dishwasher stuck on prewash cycle


the eprom memory is brocken,the main board must be changed.

Feb 14, 2010 | Whirlpool 24 in. ADG7952 Built-in...

1 Answer

Whirlpool dishwasher runs continously problem with knob


You have damaged the internal workings of the timer and unfortunately it will have to be replaced. It is not repairable.
Eric

Dec 30, 2009 | Whirlpool 24 in. ADG7540 Built-in...

1 Answer

Dishwasher starts running for 2 minutes then stops


The first 2 minutes of the cycle is a pump out cycle followed by a brief pause then a water fill cycle.Make sure the water is getting to the water valve underneath. Check the water valve for power with a volt meter just after the pump out cycle. No power= bad timer or bad wire. Power = a bad water valve or no water present.

Jul 05, 2009 | Whirlpool Dishwashers

1 Answer

Whirlpool dishwasher stops at rinse cycle and won't go


Aureley, We would like to inquire further about your post with you. Please respond back to this email address Whirlpool_Reviews@Whirlpool.com with your name, user id (Aureley), phone number, street address, zip code, reviewer name, model & serial number, and date of purchase on the appliance.

Apr 18, 2017 | Whirlpool 24 in. GU980SCG Built-in...

1 Answer

My dishwasher model adp 941 won't start - start led flashes


exactly the same problem today with an AD9520

Don't know the cause but from reading other posts re dishwasher problems I tried holding start but on for 5 - 10 seconds and it seemed to clear the symptoms at least. It ran for a short while and stopped but the flashing had stopped and I could start a wash cycle which is now running!

Dec 14, 2008 | Whirlpool GU2400XTP Built-in Dishwasher

1 Answer

Whirlpool quiet partner III


Hello bckp,
Welcome to Fixya


If your dishwasher does not run or stops during a cycle

Is the Start/Resume indicator flashing? Opening the door or
interrupting the power stopped the cycle. Close the door and
press START/RESUME.
Does the Start/Resume indicator flash 3 times when you
press START/RESUME? The dishwasher is waiting for you to
open the door after the last cycle. Open and close the door,
then press START/RESUME.
Is the door closed tightly and latched?
(NOTE: On models with a dual-digit display, the control
displays “- -” during a cycle if it believes the door is not
latched.)
Is the right cycle selected? Refer to the “Cycle Selection
Charts.”
Is there power to the dishwasher? Has a household fuse
blown, or has a circuit breaker tripped?
Has the motor stopped due to an overload? The motor
automatically resets itself within a few minutes. If it does not
restart, call for service.
Is the water shutoff valve (if installed) turned on?
It is normal for certain cycles to repeatedly pause for several
seconds during the main wash.

If the dishwasher will not fill

Check the overfill protection float that is able to move up and down
freely? Press down to release.

Let me know if any of these procedures helped you?

Huuum

Please remember to leave a rating.

Oct 04, 2008 | Whirlpool GU2400XTP Built-in Dishwasher

Not finding what you are looking for?
Whirlpool 24 in. GU980SCG Built-in Dishwasher Logo

Related Topics:

385 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Dishwashers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Mike

Level 3 Expert

4334 Answers

Owen Barnes

Level 3 Expert

867 Answers

Are you a Whirlpool Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...