Question about LG Scarlet 42LG6000 42 in. HD-Ready LCD TV

1 Answer

Remote codes for other devices

Have Sony dvd/vcr player and cable digital box. Would like them on same remote. . . . can you help?

Posted by on

  • 1 more comment 
  • dlitefuldeb Jan 31, 2009

    I have the remote that came with the LG 42LG60, the sony is slv-dp603 and the cable box is scientific america 3250HDTV

  • dlitefuldeb Jan 31, 2009

    none of those codes worked.

  • Jay Glendenning
    Jay Glendenning May 11, 2010

    Depends on the remote .. What universal remote do you have and what make model of each device do you have ...

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 837 Answers

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

HOW DO I DO CONNECTIONS OF INCOMING CABLE AND DIGITAL ADAPTER TO TV, VCR, AND DVD PLAYER?


Without seeing the exact connections for each device, i'm going to have to guess. But you should be able to connect your VCR to either your tv directly or to your DVD player. Remember you will need to use the "input" button on your TV or DVD player remote to switch from cable tv to your VCR and back.

May 02, 2014 | Emerson Flat Panel Televisions

1 Answer

Need codes for emerson & also insructions to program comcast remote


Hello
Setup codes for Emerson TV with "Comcast On demand Custom-3 Universal remote control are:

0154, 0236, 0463, 0180, 0282,
0178, 0179, 0038, 0177, 0280

The Comcast Custom 3-Device universal

remote control is preprogrammed at

the factory to operate the Cable Box

supplied by your Comcast system, an

RCA TV, and an RCA VCR (in the AUX

mode). To control devices other than

default brands (excluding the Cable

Box), perform the below steps; otherwise
skip this section:

1* Turn on a device (e.g., VCR or DVD

Player) and, if applicable, insert

media, (e.g., video cassette or disc).

NOTE: Please read steps 2 to 6 completely

before proceeding. Highlight or write

down the codes and device you wish to
program before moving on to step 2.

2* On the remote control, press a

device key once (i.e., AUX or TV).

NOTE: Use the AUX key to program

control of an Audio Amplifier or

Receiver, a DVD Player, a Home-

Theater-In-A-Box Device, a PVR (or
DVR), or a VCR.

3* Press and hold Setup until the

selected mode key blinks twice,
then release Setup.

4* Locate the code for your device in

Manufacturer's Codes on the back

of this user guide. Brands are listed

in alphabetical order with the
most popular codes listed first.

5* Enter the first four-digit code for

your device. If you perform this

procedure correctly, the selected

mode key will blink twice.

NOTE: If you enter an invalid code, the

selected mode key will display one long

blink and exit the programming mode.
Repeat steps 2 to 5 with a valid code.

6* Aim the remote control at your

device and press Power once. The

device should turn off. If it does

not respond, repeat steps 2 to 6,

trying each code listed for your
brand until you find one that

Searching For Your Code.

NOTE: If the device does not have a
Power key, press the (Play) key
OK

Aug 22, 2011 | Flat Panel Televisions

1 Answer

Hi my samsung remote is damaged.I have a one for all tv universal remote & have lost the instuctions to program the remote to the tv. I need the instructions program my one for all tv remote to my...


Hello
These are the programming proceedings for a one for all universal remote control.

[1] Turn on a desired device (e.g.,VCR or

DVD player) and, if applicable, insert
media (e.g., cassette or disc).

NOTE: Please read steps 2 through 4 completely

before proceeding.Highlight or write down the

codes and device you wish to program before
starting step 2.

[2] On the remote control,press a device key
once (i.e., TV,PVR,DVD, CBL/SAT,AUD,or VCR).

NOTE: To program control of a cable box or

satellite receiver, press CBL/SAT once.

NOTE: To program control of a CD player or

audio receiver, press AUD once.

NOTE: To program control of a TV/VCR Combo,

press VCR once.After programming, you will be

able to control channel selection, volume, and

VCR functions.

NOTE: To program control of a TV/DVD Player

Combo, press DVD once.After programming,

you will be able to control channel selection,
volume, and DVD functions.

[3] Press and hold SET until the LED (red light)
blinks twice, then release SET.

[4] Use the Manufacturer's Codes to locate the type of device and

brand name and then enter the first fourdigit

code for your device. If performed

correctly, the LED will blink twice.

NOTE: If the LED did not blink twice, repeat steps
2 through 4 and enter the same code again.

[5] Aim the remote control at the device and

press POWER once.The device should turn

off. If it does not, repeat steps 2 through 5,

trying each code for your brand until you
find one that works.

NOTE: If the device does not have a POWER
key, press the (Play) key.

[6] Repeat steps 1 through 5 for each device you want to control.

OK.


Jul 03, 2011 | Flat Panel Televisions

1 Answer

I want to program a one for all remote to samsung 42 inch plasma


Hello
Remote codes for Samsung tV with One For All URC 6131 - 6 device remote control are:
0060, 0030, 0178, 0019, 0056, 0032, 0702, 0766
Programming proceedings.

The One For All 6-Device PVR Universal Remote Control

is preprogrammed at the factory to operate an RCA TV,

VCR, and satellite receiver, a Philips Tivo PVR, a Toshiba

DVD player, and a Pioneer audio receiver/amplifier.To

control devices other than the default brands,perform
the following steps; otherwise skip this section:

[*] Turn on a desired device (e.g.,VCR or

DVD player) and, if applicable, insert
media (e.g., cassette or disc).

NOTE: Please read steps 2 through 4 completely

before proceeding.Highlight or write down the

codes and device you wish to program before
starting step 2.

[**] On the remote control,press a device key
once (i.e., TV,PVR,DVD, CBL/SAT,AUD,or VCR).

NOTE: To program control of a cable box or

satellite receiver, press CBL/SAT once.

NOTE: To program control of a CD player or

audio receiver, press AUD once.

NOTE: To program control of a TV/VCR Combo,

press VCR once.After programming, you will be

able to control channel selection, volume, and

VCR functions.

NOTE: To program control of a TV/DVD Player

Combo, press DVD once.After programming,

you will be able to control channel selection,
volume, and DVD functions

[***] Press and hold SET until the LED (red light)
blinks twice, then release SET.

[****] Use the Manufacturer's Codes of device and

brand name and then enter the first fourdigit

code for your device. If performed
correctly, the LED will blink twice.

NOTE: If the LED did not blink twice, repeat steps
2 through 4 and enter the same code again.

[*****]Aim the remote control at the device and

press POWER once.The device should turn

off. If it does not, repeat steps 2 through 5,

trying each code for your brand until you
find one that works.

NOTE: If the device does not have a POWER
key, press the (Play) key

[******]Repeat steps 1 through 5 for each device you want to control.

OK.


Jul 03, 2011 | Samsung Flat Panel Televisions

1 Answer

I need to know how to program a RCA universal remote RCU404N


Hello
Programming method for your remote control follows:-
In order for the 4 component universal remote to control your DVD player or auxiliary component, you must program it with the code that matches your component. The DVD•AUX key can be programmed to operate a DVD player or a second TV, VCR, DBS or cable box. These instructions explain the preferred method of programming the remote-the Direct Entry method.
1. Manually turn on the component you wish to assign to the DVD•AUX key (TV, VCR, DVD, DBS System or cable box).
2. Locate the enclosed DVD code list, or the
corresponding code list for the auxiliary component (TV, VCR, DBS, or cable box).
Note: If your brand isn't listed, use one of the Code Search methods to program this remote control (See Code Search on page 9).
3. Press and hold the CODE SEARCH key until the INDICATOR LIGHT illuminates, then release the CODE SEARCH key.
4. Press and release the DVD•AUX key. The INDICATOR LIGHT will blink.
5. To program for DVD, press the VCR key. For an auxiliary component, press the corresponding component key (TV, VCR, DBS•CABLE). The INDICATOR LIGHT will blink again, then remain lit.
6. Use the number keys on the remote to enter the first code listed for your brand. After you enter a valid three-digit code, the indicator light turns off.
Note: If you enter an invalid code, the LED will flash rapidly for 2 seconds. Start over at step 3.
7. Aim the remote at your component and press the ON•OFF key. If your component turns off, you have found the correct code.
8. Enter the code in the box provided on this page for future reference.
9. If your component doesn't turn off, repeat steps 3-7 above, entering the next code for your brand. If none of the codes work or your brand is not listed, use one of the Code Search methods to program this remote (See Code Search on page 9).

Mar 18, 2011 | RCA Flat Panel Televisions

1 Answer

My 40" toshiba tv nexxtech


Please let me know if this works for you! would love positive feedback! if this doesnt work let me know as well will continue to help

toshiba codes are 0159 0178 0109 0120 0181 0105 0049 0095 0170 0260 0358 0394 0924 0012 0095 0117 0141

an to reprogram it you have to follow these directions if found from an online manual for this model

Turn on the device you wish to program the remote to, point the remote at the device and press the key for that particular device (TV, etc.) on the Nexxtech remote. For TVs combined with a VCR or DVD player, use the "TV" key, and for VCR/DVD combination units, both "VCR" and "DVD" will need to be set up if your particular remote offers both.

  • 2 Locate the code (or possible codes) for your brand and type of device in the list supplied with your remote. Press and hold "P" until the display light blinks twice and then enter the first code. The display light will blink with each digit and blink twice if the code was accepted; repeat using the next code if it was not. Press "Power" once the code was accepted to see if the device responds by shutting off. Repeat the steps for all the codes listed under that brand name.
  • 3 Search for a code if none of the listed codes were accepted or if you do not have the list by pressing the appropriate device key, pressing and holding "P" until the display light blinks twice and pressing "9-9-1." Press "Power" to see if the device responds, and press "CH+" to try more codes if it does not. Press "P" again to lock in the code when successful.
  • 4 Point the remote at a programmed device, press the device key, press and hold "P" until the light blinks twice and enter "9-9-0" to learn the code for that device. Press "1" to see the code for the first digit; count the number of blinks on the display light and write down that number. If the number is 0, the light will not blink at all. Repeat for the next three digits by pressing the number key for that digit (2 through 4).
  • 5 Press "9-9-2" after pressing "P" to reassign a device key if, for example, you have two DVD players and no VCR and want to program the "VCR" setting to the second DVD player. In this example, follow "9-9-2" by pressing "DVD" and then "VCR", and then program in the code for that device.
  • Mar 17, 2011 | Toshiba Flat Panel Televisions

    2 Answers

    I need the code for ge universal remote rc24993-c to connect to a sony television please


    Universal remote allow you to control multiple electronic devices with a single remote. You can use the remote to work your TV,DVD player, cable boxes and other devices from the comfort of couch.Philips is a popular manufacturer of universal remotes.to program a GE remote for SONY TV,you will either need to input the device code or perform a code search



    direct entry



    first.turn on your TV manually. next.press down and hold set-up on the remote.the red indicator light will stay lit.after that.press the TV device button to let the remote know you wish to program a television then.enter your device four digit codes on the remote..GE list several codes for SONY television including 0002 0006 0007 0018 0107 0114 0310 0312 0502 0601 0704 0719 0803 0806 0810 0901 0911

    ..if your remote needs 3 digit codes remove only the number zero in the beginning of the codes finally.test the remote to ensure it works.with the turned on,press the channel button and see if the TV responds..if it is work the remote programmed and you are done,if it doesn't work try the different code......





    IF THIS SOLUTION HELPS YOU PLEASE DON'T FORGET TO RATE MY ANSWER THANK YOU

    Mar 09, 2011 | Flat Panel Televisions

    1 Answer

    Need a remote code for a ld4088 that works with a comcast cable box


    Hello
    Codes for Apex Dital TV with Comcast universal remote are
    0748, 0765, 0767

    1. Turn on a device (e.g., VCR or DVD

    Player) and, if applicable, insert

    media, (e.g., video cassette or disc).

    NOTE: Please read steps 2 to 6 completely

    before proceeding. Highlight or write

    down the codes and device you wish to

    program before moving on to step 2.

    2. On the remote control, press a

    device key once (i.e., AUX or TV).

    NOTE: Use the AUX key to program

    control of an Audio Amplifier or

    Receiver, a DVD Player, a Home-

    Theater-In-A-Box Device, a PVR (or

    DVR), or a VCR.

    3. Press and hold Setup until the

    selected mode key blinks twice,

    then release Setup.

    4. Locate the code for your device in

    Manufacturer's Codes on the back

    of this user guide. Brands are listed

    in alphabetical order with the

    most popular codes listed first.

    5. Enter the first four-digit code for

    your device. If you perform this

    procedure correctly, the selected

    mode key will blink twice.

    NOTE: If you enter an invalid code, the

    selected mode key will display one long

    blink and exit the programming mode.

    Repeat steps 2 to 5 with a valid code.

    6. Aim the remote control at your

    device and press Power once. The

    device should turn off. If it does

    not respond, repeat steps 2 to 6,

    trying each code listed for your
    brand until you find one that

    works. If it still does not work, try

    Searching For Your Code.

    NOTE: If the device does not have a
    Power key, press the (Play) key.
    OK.

    Feb 10, 2011 | Apex Digital LD4088 LCD TV

    1 Answer

    I need to program my APEX tv and my MAGNOVOX dvd player to my RCA remote


    HI,

    Direct Code Entry:

    Find the code your device.


    1. Press and hold "CODE SEARCH".


    2. Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.


    3. Enter the 3-digit code number.


    4. Release "CODE SEARCH".


    5. With the device on, press another button to test (volume control/power button).If it does not work, repeat steps 1 to 5 with other codes which you have.

    follow the below steps to set remote without codes


    Code Search:

    1. Turn on the device you wish to control.

    2. Press and hold "CODE SEARCH".


    3. Press and release the TV, VCR or Cable button. If programming an AUX position, press and release AUX first and then press the device type to be programmed.


    4. Release "CODE SEARCH".


    5. Press ON/OFF repeatedly until the device turns off.


    6. When the device shuts off press and release ENTER.


    7. Try using the remote. If it does not function repeat steps 1 through 6


    To Get The Code Please Go To Below Website:

    http://www.rcaaccessories.com/remotefinder/

    You need to select the following information from the drop down list

    1.Model of the remote
    2.Type of device to which you want to program(TV/DVD/VCR)

    Thank you

    Oct 15, 2010 | Flat Panel Televisions

    Not finding what you are looking for?
    LG Scarlet 42LG6000 42 in. HD-Ready LCD TV Logo

    132 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top LG Flat Panel Televisions Experts

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17129 Answers

    Les Dickinson
    Les Dickinson

    Level 3 Expert

    18299 Answers

    The Knight
    The Knight

    Level 3 Expert

    68323 Answers

    Are you a LG Flat Panel Television Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...