I just brought a new tv and hooked up my dvd to it, now no sound and distorted picture. it was working fine on my panasonic th px4260u. so what's the problem. it is the same set-up but now different results. thanks
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I have the same problem. Good picture with no sound at all. I have a LG DVX583KH and LG TV LM7200. I connected the DVD player to TV via HDMI cable, I have a clear picture but no sound. I try to hook up the DVD to other TV and it works both sound and picture. Please help
You only need the patch cord hooked up, For it to work,Not both.Allso you have to set your tv to the right in put to get a picture.If your DVD End tv is newer With blue end green jacks on it where they connect up.You will need a new patch cord with Blue end green plugs on it, The old style red white & yellow will not work.
Hi This all depends on how you connected the two. If you used the component cables then you've forgotten the audio cables. If you're using an s-cable then you've bent a pin or the connector is not centered. If you're using an Html connector then the cable may be bad but my money is on the DVD player being bad.
use a video splitter for the audio and video, or go out of the DVD player in to the DVR, out of the DVR into the TV (WARNING!!!! Trying to hook a DVD player to any recording device may trigger the copyright protection, causing blue flashes, and distorted pictures)
Hi, I have a Sansui Model San1880, after I have manually program the TV channels, I don't get no sound at all only on the TV channels its got good pictures but no sound, would you please tell me what to do.
You need to set up the out put of your DVD player. First hook up a non hdmi output to the tv, either component or coax. You don't need to hook up the audio. You should get a picture from this connection. Then you can go into the menu and set your hdmi output to match your tv, probably 1080i. You may have to turn your volume up higher when using the hdmi cable than not. I hooked my audio up directly to a surround sound and don't use the tv's speakers.