Question about Whirlpool Ultimate Care II LSQ9549L Top Load Washer

1 Answer

Whirlpool wahing machine LSQ954PW2

Machine stopped in middle of cycle and is in a froen state. Checked power 115 volts available to the machine. Suspect switch detecting lid opening is defective. Can not even find sensor switch. please HELP!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 750 Answers

Hello lmaichin
Welcome to Fixya
My name is Huum,

You said,
Machine stopped in middle of cycle and is in a froen state. Checked power 115 volts available to the machine. Suspect switch detecting lid opening is defective. Can not even find sensor switch. please HELP!

At this site you will find the diagram you need. Lid Switch is # 11
http://www.pcappliancerepair.com/model-display.php


Thank You For trusting us with your question
Please remember to leave a solved rating before you leave!

Posted on Feb 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whirlpool washing machine style master #907675 just stop working in the middle of the wash cycle and won't start again.


Susan, First make sure there is still power to the outlet washer is pluged into, may have tripped the breaker/fuse. Could be something as simple as a loose wire/plug, lid switch to something worse like control board. Have a good Tech. diagnose and estimate repair. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

Troubleshoot washer stops mid cycle won drain or spin
Whirlpool Kenmore Maytag Washer Repair Fills Then Stops mid cycle
Fix Your Home Appliances Instantly
Washer just stopped working all together in the middle of wash cycle

Jul 03, 2016 | Whirlpool Washing Machines

1 Answer

Hi There, please can you help. My Hotpoint BWM129 is not heating up the water. I have checked the Element which is OK (30ohms). Have you any solutions to this issue. Greg


Make sure you have 220 at the elements. If the circuit breaker in the power panel for the house has one tripped but not the other then 115 volts will be available for the motor, timer and lights, but the heat element will not heat.

Jan 03, 2015 | Hotpoint Washing Machines

1 Answer

Lights come on and the system does not work


it might be your control board,but check the pipe is not bent because that will stop the water flow

Nov 02, 2009 | Kenmore Elite 45986 Front Load Washer

1 Answer

Indesit wahing machine WIE 167 keeps filling with water and did flash H2O have replaced the switch mechinism inside but to no avail tube is not punctured or coroded - will not go onto wash cycle but will...


You need to clear out pressure chamber the part the at tube plugs into the chamber it will be clogged, stopping air going to pressure switch...This should cure..

Oct 07, 2009 | Washing Machines

1 Answer

AWM6140/3 Wahing machine


it's a prgramme timer issue mate, you either need the timer flashing with updated software or a replacement timer

Aug 24, 2009 | Whirlpool AWM6140 Front Load Washer

2 Answers

Spining makes noise and machine vibrates a lot


its a simple solution just remove the brown colour clamp at the bottom of the machine with a screw driver

Jun 03, 2009 | Whirlpool Washing Machines

1 Answer

I own a kenmore top loading machine model number 110 10 amp 60 hertz 120 volts the machine gets power and runs but the big control knob that controls the diffrent cycles is running only about 20 seconds...


sounds like you should replace timer (big control) timer motor is part of timer. Is timer knob speeding thru cycle that fast or just start/stop.
110 is manufacturer code for whirlpool, number after decimal is model number. tech sheet avail inside console by unsnapping left and right console covers and removing hidden screw at front bottom corners, pull forward slightly then fold console back (hinged at rear top).

Apr 26, 2009 | Kenmore 22642 Top Load Washer

2 Answers

Machine stopped in middle of wash cycle.


Timer needs replaced try gigling your timer knob and see if you get any reaction dont be afraid gigle it up and down hard sounds like point in timer are burnt

Sep 13, 2008 | Whirlpool Ultimate Care II LSQ9549L Top...

Not finding what you are looking for?
Whirlpool Ultimate Care II LSQ9549L Top Load Washer Logo

Related Topics:

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...