Question about Bosch Nexxt Premium WFMC6400UC Front Load Washer

1 Answer

Error E;04 our Bosch WFMC 2100UC washing machine shows the error numer  E:04 which indicates a plugged pump hose or pump.. the hose is OK.. would like instructions to check the pump..

Posted by on

  • lshake Feb 10, 2009

    this was right..  not where in the instructions did it even tell me what the access panel in front was even for..  I found it..  opened and un screwed the plug..  found some stuff in there and cleaned it out and wa la.. it was fixed..  interesting there is also a pull lever in there that I guess will open the front door if its locked and won't open..  thank you so much... 

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 20 Answers

Located front down on right hand side. Remove cover gain access to water pump.

Posted on Feb 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Bosch Nexxt Essence WFMC 2100 UC (washing machine) Water leak noticed on floor right in front after wash cycle is completed. This occurs every time I use the washer.


Bosch Nexxt Essence WFMC 2100 UC (washing machine) Water leak This video will show you how to find that leak on any front loading washing machine
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.
And don't forget to like us on facebook

Oct 26, 2010 | Bosch WFMC2100UC Nexxt Essence Washer

1 Answer

Bosch WFMC 3200UC can't rotate the drum


that test indicates a faulty speed sensor or wiring harness.

Jan 23, 2010 | Bosch WFMC 3200 Front Load Washer

2 Answers

MACHINE NOT DRAINING ERROR CODE E:04


check the hose it's clogged or the stainer it's clogged too

Jan 15, 2010 | Bosch WFMC 3200 Front Load Washer

1 Answer

Bosch WFMC 3200 Front Load will not pump water out


the pump gears could be stripped or clogged with soap residue including the line from the pump to include the drain hose itself. I took the back of my machine off after cleaning the pump twice to find the reservoir full of a brown soap gunk/sludge. there is also a small rubber tube that runs from this reservoir back into the drum which was plugged shut with the same gunk. this thick soap residue can damage the pump motor or slow the drainage system to get the E 04 warning. I cleaned the gray drain hose out with the garden hose and was amazed at the sludge that game out. When the machine would run on the drain cycle we would also get a sewage smell that I thought was coming form the drain trap but turned out to be caused by the sludge in the pump. After cleaning the system and now using no more that a tablespoon of soap it works great & the cloths are clean.

Dec 18, 2008 | Bosch WFMC 3200 Front Load Washer

2 Answers

What is error code f04 on a hotpoint w860 many thanks


Dear gavinrolason,
Error code F-04 and F-05
Check the the connection of the drainage hose to your sink wastage,
as it may be blocked and the drainage of water impeded
Hope it helps, this info is applicable to W840/W860 Hotpoint Machines

Regards
EngineerGR

Apr 09, 2008 | Bosch WFMC 3200 Front Load Washer

1 Answer

Drain pump runs constantly:Error code E02


Suggestions: First see that the exit hose behind your machine is inserted at a particular height, ie about 3 feet above ground level, then into the standpipe in your wall. If things dont work plug off the wall, open up behind, you will see a thin pipe coming down from the pressure switch to the drain area. Disconnect this pipe carefully from the top and blow into it, it should be free. If blocked clear, if broken or damaged change. Refit carefully.

Pl rate me helped.......

Dec 28, 2007 | Bosch WFMC 3200 Front Load Washer

1 Answer

E02 message


Error relates to water taking to long to get into machine. Check tap is open fully, water pressure is ok, hoses are not kinked. also check the small filters either end of the inlet hoses (inlet valves as well) as quite often they can clog up especialy on a new install. Regards

Jul 22, 2007 | Bosch WFMC 3200 Front Load Washer

Not finding what you are looking for?
Bosch Nexxt Premium WFMC6400UC Front Load Washer Logo

319 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Tim Whalen

Level 3 Expert

3069 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

yadayada
yadayada

Level 3 Expert

63580 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...